hi everyone it's Lou Collins today I'd
like to show you a technique using my
dyes to create a really fun D cut with
added color and I discovered this
completely by accident so the Dy I'm
going to be using to get the two
different looks for you are my texture
steampunk type panel dyes I'm going to
use these fabulous cogs and gears here
and then I'm also going to go a little
bit girly with the marer dyes I'm going
to be using this butterfly strip here as
well so I've kind of got a masculine
feminine girly not of girly effect here
just to show you how you can make it
suit any different style or any
different occasion now what you are
going to need as well as a diey is H
some Mirror card and I've gone with
golden silk it doesn't matter it doesn't
matter what colors they are you can use
your scraps it's perfect for this if
you've got Mirror card that's scuffed
got marks on it whatever it may be this
will be ideal as long as the back is
clear so let's start first of with the
cogs and gears I'm going to put my um my
cogs and gears onto my mirror card now
if you're really particular about which
way round you want your final die cut to
be then you need to die cut onto the uh
White onto the reverse there if you're
not worried I just tend to go onto the
gold because that's habit it doesn't
matter eventually your final piece is
going to be flipped from what your D
would normally cut so just bear that in
mind especially of course if you are
doing a word or a sentiment which you
can absolutely do with this technique so
I'm just going to die cut this and I'll
also at the same time die cut my
Butterflies from the silver how awesome
is this panel it's going to be
absolutely perfect for things like
Father's Day coming up if you've got a
brother a son a cousin um or a lady who
loves things that are mechanical this is
going to be the perfect die like I said
this comes from my textures steampunk
collection and you can still find it so
I'll make sure it's linked down below
for
you okay so I've got my two different
die Cuts let's pop the butterflies aside
for a moment while we work on the cogs
and gears now just take a look at the
back of your mirror card and kind of um
make sure you know what color it is this
doesn't seem important right now but it
will be later um make a note of the sort
of color is it bright white is it off
white is it a cream um I have found a
card stock that is similar color is a
watercolor so I'm happy that I'm going
to be able to use this later on for my
base and make everything tone in again
you'll see that in the end result anyway
so now I'm going to bring in some color
and I have chosen to go with kind of a
rusty and patina look on this particular
one I'm going to go with Rusty hinge
peacock feathers and a little bit of
black sht as well to really get some
depth into the colors so I'm going to
start with the lightest color PE peacock
feathers and just put this in a couple
of areas I don't want too much of this
and I know that the rusty hinge and the
peacock feathers together is going to
make a green then I'm going to go over
the rest pretty much the rest of the uh
cogs and I'm going onto the mirror side
it's really important you go onto the
mirror side
here with the rusty hinge there and then
I'm going to just fill in any gaps just
add a few bits of the black soot the
black soot is more of a gray in oxides
this can be done with inks I am going to
do this with distress inks in just a
moment now I'm going to wipe clean my
mat before I do the next stage so just a
spritz of water take all of that excess
ink
off if you prefer if you love your mix
media and you're getting Mucky fingers
you can of course just sort of spooch
that or smoosh that onto a piece of
paper for a fun
background now I'm going to Spritz my
Mirror card with water and I want quite
a bit of water on here and then I'm
going to take a scrap of
paper and I'm going to turn this over
and with a spare piece of acet tape I'm
just going to press this down now what
I'm looking for is not the print we're
not worried about what's printing onto
the side I appreciate you've got a light
shining on there what I'm looking for is
the edge of the Mirror card is picking
up some of that ink so what's happening
here is I'm just using the acetate to
press down on and sort of squeeze the
liquid the ink the water out to the
edges of the design now the diecut edges
is seeping up and absorbing this colored
liquid this ink if I just lift that up
so you can see a bit more without the
glare of the light on there and it's
really holding on to the edges of the
die cut so now if I lift this up we've
got a fabulous print underneath which of
course you can use and we've also got a
really darkened edged piece here now
this might not look like a lot right now
but if I just put this onto the same
color card stock so where I said have a
look and see what color card stock
you've got at home if you look there how
beautiful does that look for a nice
subtle effect from your die cut it's
almost an outline stamp almost an
outline stamp and you could use it as so
now I'm going to do this again with the
butterfly very quickly and I'm actually
going to use inks this time for a little
bit of difference and then I'm going to
show you another step to this technique
which is going to make it even more fun
so this time I'm going on to my
butterflies with my um ink I'm using
pink and I'm using so the pink is a
picked raspberry and I'm going to be
using using uh peacock feathers which is
the turquoise color just be aware of the
ink that's on your mat you don't really
want to be smudging your white card
stock underneath in that too much I did
it a little bit with the cogs and gears
I'm going to try and be a bit more
careful this
time there we go so I've got my ink on
there and the back's pretty clean still
so again I'm just going to give this a
wipe to get the excess ink off because I
don't want that hitting
the back of my D cut I only want those
edges to grab the color then I'm going
to put lots of moisture onto to the top
here lots of water again bring in my
spare paper which is going to absorb
some of that
moisture I can see it already happening
here without even having to press down
and help encourage it so I've got pink
around the bottom Edge and I've got blue
around the top now if you use too much
water you can get this happen so that
the entire D cut fills with liquid that
is also going to be due to the uh detail
on the die cut so the edges are so close
together that actually they're kind of
meeting the colors meeting but as you
can see less down here and we've just
got that lovely pink and blue outline to
the entire die
cut I've just got a little bit of an
area around this part and this part that
don't have much on there so I'm going to
repeat the process with
these and you can repeat this as many
times as you
wish so just taking a look at that pink
and blue that die cut on there is so
beautiful now this is probably something
you've seen before if you've Inked a die
cut and you've flipped it over looked at
the reverse but have you ever actually
thought about using them on your cards
it's so beautiful let's add even more
depth and dimension to these so I'm
going to redy cut these two dyes to give
me like a stencil so with my two die
Cuts I'm going to put these onto my card
and use them as stencils to create
slight Silhouettes I'm going to use a
blending brush and I'm going to use my
black Su I had this out earlier when we
were doing the inking onto the cogs and
this is just going to be ever such light
inking here now you want to be in mind
whereabouts on your card your cogs are
going to go or whatever die cut it is
and you want to make sure that you place
your stencil which would usually be
backwards on in the similar sort of area
so I think there will be fine so a
little bit of ink and I'm just going to
brush outwards from these cogs so not a
lot it's just enough to add a little bit
of a shadow in amongst some of them so
just brushing sort of outwards from the
cogs in towards those empty spaces a
little it's a really nice technique
that's very subtle but it does make a
difference there so like I say ever so
subtle and then this is going to go over
the top so I've then got a little bit of
shading in there and I've also got my
die cut now I can stick this down either
with foam tape or I can put it down
completely flat with glue so there are
two fun cards with really subtle
backgrounds using your D Cuts but the
reverse of your D Cuts with that ink
seeping technique throughout them so I
hope you've enjoyed this as another
technique to add to your crafting
Arsenal have fun with this hopefully you
like the dimension that we've achieved
there with the foam pads on this one and
less so with just the flat glue on this
one making it a little more
subtle