Smart LOCK UNBOXING and review Signstek Keyless Entry FULL INSTALLATION AND SETUP

Hello friends and welcome to another unboxing video I'm checking out this electronic touchscreen door lock okay these smart locks are pretty fun to work with we have quite a few on our house and we like them a lot some are fingerprints some are keypad but with the keys they all come with the keys too so that's nice just in case the battery doesn't work or whatever so we have the key set there we have the little um stopper for the the door jamb there we have our Bolt a little Allen key with some screws and then we have our handle that is really solid that feels like commercial grade there is basically just a solid chunk of metal there that's going to be pretty impressive so I'm going to be installing this for you my friends and here is the outside portion seems like really really oh really beefy and strong this seems like it's going to be a nice addition we're gonna I'm gonna be putting this on my tree house out in the backyard so be doing an install for you all there okay let me get this back in the box I'll take it out there in the back and show you how to install it okay friends so first thing we want to do is get our uh this established so we're just going to put that in there and then screw that into place oh let's just slide this right in here make sure that this is facing towards the door and screw that in real quick okay here we go [Music] there's one [Music] there we go perfectly flush now let's get our Striker plate in there so right over here all right so obviously we want this facing that direction like that and then see if these screws are look it's okay buddy oh my got my cat right there see if this screws long enough here if not we might have to adjust it a little bit but that's okay all right looks like it's going to hold pretty good in the metal door there okay it looks pretty solid back to the other door okay so here we go this is the front plate is going to have the the numbers here and the key lock and we're going to slide this Square part through there and then also get our wire going in there through the top so you just want to make sure that wire is feeding through the top as well it wants to bend there so I want to get it straight so this gotta go kind of in the top along the top there so okay got through there and then to be careful not to pinch the wire and that should just fit on there like that okay super simple and there we go so you have that wire fed over the top here like that all right next we have plate and some screws this uh face plate is going to go right on there like this okay and I'll get my screws out here okay here we go so these screws I'm gonna go right through here and hold that on there okay sorry about this on your way there just need to see where my screw is going okay once we got those lined up then we can screw those in nice as you please see I'm just gonna use my screwdriver it's a lot easier [Music] foreign okay all right that is nice and snug on the front there and then we're just going to take this one and of course that's going to plug in right there push that in there if we can put that little wire in there all right and that's just going to kind of feed around our thing here too so all right once we got that there and this is going to go over that like that make sure we're all good there and we take these uh three little screws they gave us okay and we're just going to screw these onto the plate here there we go I'm not going to tighten them all the way yet I want to make sure we get them all on there and then I can tighten them up once I know that they're all in place here okay okay there we go next we have our handles let's see which one's going on there all right all right so from what I could tell these handles are identical so put one on the front there let's see here actually that's not the case so it depends on where you have where you have your thing facing so they're only going to go on one way and once you figure that out you just slip them on there and then to hold your Handles in place you have these little tiny screws here get them on your Allen key just like that and then just tighten them down right on there okay there's one and I'm doing the same on the front one here just get that Allen key there and we'll just tighten it on there and there we go okay so these can be pretty snug you want these on there pretty snug for sure all right there's that okay and that's opening this front door just gonna make sure that it works okay put some batteries in and we're probably good to go okay so get my batteries in there oh these are AAA not double A and then we use the Amazon basics of course love these batteries they work really well not sponsored but I wish I was okay just put those in there and then we're just gonna slide our little thing right into place there look at that that is clean it comes with this little um hole cover here and we're just simply going to put that right in there oops we're going to try that again there we go that looks pretty sweet back to the keypad okay friends so here we are if I want to add any user code activate the keypad first enter the regular thing and that green light means it's good and now I can enter a programming code oops they have to do that before so okay okay so the default user code is light up a keypad first and then one two three four five six number this says zero green light okay did six hit the zero six times weight for the green exclamation point there and one long beep press one oops one two three four five six one two three four five six there we go press one and then wait for the green thing and a new code press so you gotta do this quickly okay one two three four five six okay press one okay enter new code okay and [Music] we're good to go I think okay enter new code foreign this all has to be done really quick so I was just kind of waiting you can't wait you just gotta go so the six zero is a pound the hashtag signed and then press one and hashtag sign just wait for the beep after that put in your code and hashtag it beeps to put in the same code and hashtag again it beeps again and then it should be a little open so here we go activate the pad there we go four sevens and it's open and super easy to do um yeah so that's pretty cool and if we want to set another one I'll try another one here if I can should have default code delete user code and change the programming code so if I want to change the programming code I can change that too so right now the default zero zero zero and we want to change that to something else okay so super easy to change that just follow the steps to change the user code you just input the that password and then just do real quick of the steps wait for the green light and then just keep going and we can also unlock this with our key foreign just turn it up like that and it works really nice super smooth and there we have it now it's locked I put in my code and the hashtag and it opens right up all right my friend so super happy with this install was really easy this is super strong feeling the code works the the keypad is really responsive I really like that Keys work nice everything was really top-notch about this sorry I took a little bit longer on the coding thing but I was just doing it wrong so you're going to do it right and it works perfectly really happy with this I like the like this seems like super sturdy like industrial straight this is like solid metal and anyways have a great day my friend