【UV レジン高難易度の製作】ストローを使って、DIYブレスレットチャームHigh Difficulty Crafting UV Resin - DIY Bracelet Charm by straw

The material that we are going to use this time ! 0.6mm copper wire ~8cm Coat with a bit UV Resin carefully Coat with a bit UV Resin Coat with a bit UV Resin Coat with a bit UV Resin Coat with a bit UV Resin This time will use a straw for assistance 8mm metal ring Coat with a bit UV Resin carefully Coat with a bit UV Resin carefully Coat with a bit UV Resin carefully Cover with 2nd layer of UV resin Add up a bit gold leaf Cover with 3rd layer of UV resin Cover with 4st layer of UV resin Cover with 5st layer of UV resin Rotating to hold the Resin under control Cover with 6st layer of UV resin Rotating to hold the Resin under control Cover with 7st layer of UV resin Rotating to hold the Resin under control Cover with 8st layer of UV resin Rotating to hold the Resin under control Cover with 9st layer of UV resin Rotating to hold the Resin under control Cover with 10st layer of UV resin Rotating to hold the Resin under control That’s the end of the episode See you next time!