冰箱一直製冷不停機?不用找老師傅解決,3分鐘換個小元件輕鬆搞定【我愛電器維修】
我爱电器维修
89粉絲
#冰箱#家電#家電維修#電器維修#修復
哈嘍,大家好
分享通俗易懂的維修視頻
讓維修從此變得很簡單
專業(手機,電腦,監控,家電)維修
喜歡我就訂閱我哦
https://www.youtube.com/channel/UCma9sHXyCIBoYmC0PzDmLNw?sub_confirmation=1
冰箱一直製冷不停機?不用找老師傅解決,3分鐘換個小元件輕鬆搞定【我愛電器維修】
Today we are repairing a refrigerator from Meiling
What's his problem? The customer says it doesn't cool
But when you bring it to my shop
The refrigeration was all right during the test
But he had another problem
This is the refrigerator that doesn't stop
He's been running since we plugged him in
How long does it run? It just doesn't stop
Cold room?
What is the temperature below zero
He doesn't bring a stop either
It's like this
Generally, we ask our customers to buy one of these
An external thermostat will do
But you know what? To make a little extra money
You're not gonna make a lot of money selling this thing
Try to fix it if you can
First of all, I've refrigerated this
The chamber and freezer have been disassembled
Start by measuring this one in the freezer with a watch
Temperature sensor
Measure him to see if his resistance is normal
He's got two Kings
Let's see, when we measured it, it was 4.14K
But that's normal
It depends on the temperature
Its resistance has changed
I have a low temperature here
So the resistance of the measurement is too large
This sensor it's a no problem
Is it a good
And then the next step is the freezer
There's also a warm head
So let's see
It's on this side of the tube right here
I've already tested the thermometer
There's nothing wrong with him either
For friends who don't know how to repair
If you also want to save money do not want to let master maintenance
The easiest way to do it
It's just this external thermostat
When you use it
First of all, take the temperature on top of the refrigerator
Refrigerate and freeze it on full blast
And then?
Plug the refrigerator into this jack
This jack is in the house
Above the power plug
We have to do is
It's easy to use and mostly it saves money
But for me as a maintenance guy
I need to get this fridge fixed. I have to get it fixed
Let's take a look at the back of this refrigerator
And then behind him here is the compressor
And then on top of this let's see this is a plastic box
Take the box apart
There's a circuit board in here
There must be something wrong with this board if the compressor does not stop
Let's take it apart and examine it
Let's take a look at it after we open it
On this board
This black one is a relay
What do we do? Let's power him up now
Listen for the sound of the relay closing
Now power on
OK has been powered up
The compressor is running now
But no.
I didn't hear anything on the relay
A clicking sound
Now let's unplug this one again
Listen to this
Relay has no separate sound
Still no sound
Something like that I suspect it's a relay
It's sticking inside
Now let's take this board apart
Let's check if it's a relay problem
All right, so let's look at this. This is the relay
On his back let's see how many pins he has
There are four pins
These two have two other four pins on this side
These are the control pins
And then these two are cutoff conduction at 220 volts
Two contacts
Let's measure these two contacts
Let's see if it's sticking together
Use the watch Fengming
measure
listen
I see it's on
He's just adhesions on the inside
Give it a few knocks and see if it pulls apart
Listen, there's no sound now
The adhesive parts have separated
His problem is that the relay is broken
Let's take this off
Change the relay and test it
See if this refrigerator can be fixed
I can't find the same relay model
This is the old one
Then I installed a small one
Let's test it on the fly
Let's see if this refrigerator problem can be fixed
OK, now the test has been no problem
The machine can also stop when the temperature is normal
In the end it's just a matter of putting this thing back together
And the same thing with this board over here
Get it all set up
