接線不用纏膠帶,也不用熱縮管,3分鐘學會這方法絕緣又防水【我愛電器維修】
我爱电器维修
89粉絲
#接線#電工#線路#生活小技巧
哈嘍,大家好
分享通俗易懂的維修視頻
讓維修從此變得很簡單
專業(手機,電腦,監控,家電)維修
喜歡我就訂閱我哦
https://www.youtube.com/channel/UCma9sHXyCIBoYmC0PzDmLNw?sub_confirmation=1
接線不用纏膠帶,也不用熱縮管,3分鐘學會這方法絕緣又防水【我愛電器維修】
In the future when wiring
You don't need the electrical tape
You don't need this heat shrink tube
today
This video shares two very useful methods
After the wire is connected
This thread is not only waterproof
It is also resistant to high temperatures
Both methods have their advantages
There's always one that works for everyone
First of all, the first one
That's when you do it
Start by peeling off this wire for him
And then pull out these two threads his threads
When you're done
And then give it a twist like a twist
After a twist
And then we start wiring
There's a crucial step in the wiring process
Just when we were dialing the line
Don't lose the big outer layer
I'm going to put it over this line
Well let's just look at this line
It's still pretty tight
Then grab the copper wire inside and pull it out
When you pull it out
And then?
I started to connect the two lines to each other
When you're done
Then!
Let's pull this wire sheath this way
And when we're done, let's see
And that's it
And when it's ready let's try it out
It's still very strong. Look at that
And then there's no need for tape
This operation method is simple and practical
First let's take a look
Well, there are some household appliances
Including some electric fans and some other appliances
This is the way it is connected
Take a look at this thread
It's just a white tube like this
Let's pull the tube back and have a look
That's how it's wired inside
And then there's this one on the outside
Uh, insulating tube
Actually, it's like this wiring method
It's fairly common
But there is a drawback to this wiring
It's not resistant to heat or water
And then?
Let's look at the electrical plug in our home
It's disconnected at the root
And then both threads are exposed
It's like this
There's no way to tape it up
Because the tape won't go in
And even the heat shrink tube ah also can't use
Unless it's with scissors
Cut it off and reconnect it
If you don't cut it off
Well, there's another way to do it
Now I would like to share this method with you
When you're done with it
Not only is it waterproof but it can also withstand high temperatures
Like a normal connector like this
You could do it the same way
You can brush this black liquid on top
When you're done
Well, let's see if it works
If it works
Let me tell you a little bit about this liquid
And then when I brush this
I want to brush all the exposed copper wire into place
When you're done
And then plug this in
And the exposed part of the root, give it a brush as well
I want you to finish the whole circle
Make it completely wrapped around the exposed copper wire
Like when we were working
Encountered some narrow Spaces
When there's no way to wrap the tape
We can use this method
It's very convenient
This liquid is not only resistant to high temperatures
And it's waterproof
This connector is the one I use for testing
It's all dried up
And when you're done it's the same as rubber
It's also insulated
And then let's test that out
Let's see if it's waterproof
Get it in the water first
We can see that this one is quite good
And it's also very soft
This is liquid electrical tape
It's very widely used
Especially suitable for some small space to use
It's very convenient
