手機壞了不能充電？只要10塊錢買個小板，3分鐘換上輕鬆修好【我愛電器維修】

The phone is broken and won't charge Don't want to spend money to find a master repair And I can't fix it myself What do you do in a situation like this Don't worry. I'm going to teach you one thing Cell phone can't charge It's like this It's usually the one behind the phone Problems with the charging port He's the worst In this case, they will not replace the charging port Uh, I'm going to share this with you in this case It works really well Yeah, just buy one of these online Let's have a look first Just one of these This thing is called a tailgate I'm going to open it up for you Every phone has one of these Let's take a look at this: the charging port And then the repairman Generally, it is a direct replacement of a charging port Like we don't uh Can't play with the soldering iron People who don't know how to use a soldering iron I just need one of these The tail plug is always a success It's on every phone Actually, buy one of these All you have to do is screw it on with a screwdriver When I bought this little board Take a look at the belt tools or relatively complete ah You have all kinds of screwdrivers And then I brought a jar of glue Say so? In this case You just need to be able to do it yourself Take the phone apart Just screw this thing on Okay, now I'm going to share it with you Cell phone replacement tail plug charging small board method And this phone is in the charging port uh There are two screws on the side First remove these two screws And then you take the Cato out All right, so let's just start removing the back shell Get him a suction cup Tear down the screen You need to be careful Because this phone has a broken screen Be careful when you take it apart I mean, it could happen without you noticing After we replace the tail plug This screen will be useless if you put it on After turning off the phone, disconnect the battery and wire first OK lost the power Take this iron cover off the top The tail insert is in this position And then down here we have the tail board Take this little board off of it What are the top two lines Buckle first And then this little board comes off This is the charging port What about the repairman? General maintenance. is Just replace one of these charging ports If you are repairing this situation It would be easier to just switch to one of these Because you don't need a soldering iron Only need? It can be replaced with a screwdriver The operation method is also very simple And then this is a new one Later? We're just gonna put this on him That's it. That's the easiest way And it's also faster The key is to buy the board It's pretty cheap, too So well You don't have to replace the tail plug When you take it down, how do you take it down How do we even get it on This is a feeder for an antenna Let's put this on first When you're done, turn on your phone first And then we'll see if we can charge it Look at it first. Is it okay? It can be charged At this point, at the end Just give him the screen and install it again