COMO FAZER FURA E ESPIGA MANUAL
Amarildo Móveis de Demolição
2 followers
Mar 13, 2024
Furas e espigas com ferramentas manuais (marcenaria antiga).
o
Hello everyone, today I want to show
you a video of how I did it in the
past, Mack didn't exist, right, who
knew how to purify it to make a
table leg or make noise, right? But you're going to
do it, you don't have time, drill,
come with the tools, now I I only have the
chisel, saw, right, and
put it to use by hand here, of course,
the first time I used it to do something
like this, so the tool needs to be sharp,
right,
because I can actually take it, it could be a happy
Van, right, so I said I would and now
all manual That's it if you like it is
[Music] What's up
And
in this case here is this piece here it was afraid
here 7 cm
by 35
22 23 in 94
andby
4:40 in length 40cm in length
so I'm going to have to leave this piece
that's straight oh
straight here it's going to be straight here like this oh it's
going to be straight here
and straight here oh oh And
then
and here I'm going to put it in the width of it that I'm
sure in 30 days
I received it and come back here oh the square piece,
right? I'm going to have to give a discount
here o because it's going to be straight here o
So I'm going to leave it in the center and month don't
sit first here o it's inside here
o
5 months ago it
's the same thing it's
[Music]
and already crossed out both pieces Remembering that
this piece here is square, there is no
problem but when the piece is rectangular, that
is, there are three more because here,
you will have to cross out the
payment to exchange this sheet with
this one and this one up here, right
here I'm going to do it here more daughter with
two centimeters long I'm going to
forget it here
And then I come back and
theworst
[Music]
the resort hotel
next door something
so here I took it for myself, right I found a
point here in this suit and smaller than that mine
of about eight girls try to
transfer this to here
[Music]
this colleague I already get the first risk
that it is not
And then we will get the width of the
lung
more or less water in the lung is a
little more no There's a problem, I
'm going to take this other programming and do
the other side,
so what's
up?
side and do the same thing,
I already got a parliamentarian, it's already regulated, right? Let me know, let's go
because this side here is the
side of this part here, we
're going to stay here
[Music]
walking around then I'm going to take the side that's best
suited for me here, do the same thing,
I'm going to go back and breathe or transfer it
here
[Music]
I can transfer it here and
go, you'll get it here, as I said here, you
see, it's the same width as the foot
and here, it's already the regulator for me,
it's the same thing, you see, I almost
couldn't turn the piece. It's two or
three thick, but it's even easier
if you have to make it a
little wider 1
And it was very little here, now
I could have also reduced
the grameen more here and I would have gained more in this piece
here, but let's do it like this with this is
And then we
were very short, the piece
is with the piece that is already stuck there, I'm going to use
the lung that it was here, I'm not going to
beat the mold, I'm going to work with my
brother in this regard, here, on my
side, here,
What'sup?
becoming
[Music]
the first cut in which you know you have
to make a mark on this side here, the
lung is on this side and on this
side what is
[Music]
the
management of
patience and practical, right, the person will
move
a lot of time for you that the first one
you try to do it and it will work but you
have to try for the
And then it
is
but
when I arrived now,
why does it start a hole now
already
working 31
G1 What's up What's up What's up What's up What's
up
G1 What's up What's up What's up and
[Music]
this one is a little bit, there's not a
little bit of patience but they
weren't that quick and you're a little bit
slow
just so there's no this year, right, little
brother, trying the joke in 1
Andthen
I
got a hole in it consciously with 2 cm, a fight about
Culture
[Music]
the cob, right,
it's a boat to write in.
what to read powder seeing
the risk there of calculation in
what time the cut here the cut here
he is listening to the outside of the foot leaning
on the disc and I'm going to run the Saw
a little further out
[Music] What's up
[Music] What's
up
What'sup What's
up
[Music]
G1
Andthen
to answer that it was practically on
top of the risk here,
you can see there
and now this other one Cut here from this
other cut here I'm going to have to do
that one very thickly because there wasn't
a test left
wood on this side, right, so I'm
just going to give a little detail here on our
Route and end up in the gloss
[Music]
Andthen
[Music]
Andthen and
here I told you, there's the one who's
taking that cut here so we can
finish synagogue and
What is this wood that was Narrow
so if I had it was wider I
would have gone through this route here
and you know what I took on the
rough it
won't stay here it won't go in
Andthen
and now I'm going from here to make this
measurement here oh I'm going to have to cut
cut here oh And then And
then And then
[Music] [
Laughter]
see, Taís is ready there and the cure,
right? So it's the
power that worked here and here. I'm selling
a technique and old carpentry, you know, I
used to make them like this and now I want to put glue here, glue it, right, I'm
not going to wash it in the past, that's not what I'm
doing like this
[Music]
the
employee here, see, Zezinho
really wants to clean
this, that's how it
used to be. Anyway, I didn't
have a machine, right
?
Just remember
that to do this
you have to have a little
patience because it's a bit time-consuming.
