兩個包容量都很大，側邊一個正方形一個是菱形，做法有什麼不同？ 手工布藝 #DIY快樂手工

Hello everyone welcome to Happy Handicraft I made a storage bag some time ago The side is diamond-shaped I said I would make a square side Today I made it Today we are also going to make a different game. Can you know the difference between the two productions? These two pieces are the cloth of our bag. I fold it in half and say the size better. This side is 4 centimeters, this side is 7 centimeters, and the height is 8 centimeters. First of all we sew these two short sides and turn them to the front This is our main material which is also a trapezoid Let's talk about the size of the cotton This side is 24 centimeters the lower side is 36 centimeters and the height is 11 centimeters We iron on the face, put a centimeter of seam allowance, the face is two, the lining is also two. We prepare a zipper the length of the zipper is 56 centimeters we fix it on our face the center point is aligned the front of the zipper is opposite to the front of the face we sew the zipper on the face sew to the corner we cut a knife on the zipper fold it over and continue to sew down Next we take out two pieces of cloth we put it two centimeters down the corner put it on this side the other piece covers our lining the front of the material goes down we sew a line like this after sewing we turn the material to the front we sew a narrow edge here when sewing the narrow edge we don't sew in the cloth We only sew under the lining and the face We take the other side, we sew it together with the other side of the zipper, and when we sew it, we turn it over to the other side, and then we fold the barrier up, and it's the same, two centimeters down from the corner here, and we sew the barrier together with the other end of the zipper, and it's the same here. After sewing, we cover the lining material, sew these three edges, and sew the zipper on the other side. We also need to sew a narrow edge. This bag is very big, so we need to install a handle. The length of this ribbon is 25 centimeters, and the width is 2.5 centimeters. We fold the two raw edges of the ribbon inward and sew it on the face. Next, we will introduce the bottom material, which is a 24cm square with cotton size. Let's put one centimeter of seam allowance, one face and one lining. Let's fold it up and fold the reverse side inside. Then we take out the main material we just made, and we turn the material inside, the lining side. Then we put the square on it, and we sew a circle of raw edges, and we wrap it with a wrapping tape. Let me tell you that the zipper is aligned, in the middle of 24 centimeters, at both ends of the zipper. When we sew it like this, we cross it, and it's flat here. Next we do the middle layer, the two materials are the same, one I iron a non-woven lining, it's a 21cm square, prepare a 21cm zipper, we put the zipper on both sides of the material, and then we cover the other material and sew the two lines. After sewing we turn the interlayer material to the front and install the zipper head Next we take out the finished bag We put the interlayer in the middle of the cloth Then we sew a line on each side to fix the interlayer Now the storage bag is ready I will reveal the answer The triangles on both sides of the drawings of the main materials of these two bags are different. You can see that they are just a little bit different. The capacity of these two bags is much different after they are finished. This capacity is obviously much larger. That's all for this video Thank you for your precious time to watch my video Remember to help me like it See you next time