網上買了一個脈衝修復充電器,真的能修復壞電瓶嗎?測試後知道了 #我愛電器維修
我們的視頻是為了為觀眾提供有價值的內容,絕對沒有任何違規行為。 我們的視頻是為了為觀眾提供有價值的內容,絕對沒有任何違規行為。 非專業人員請勿直接操作!
哈嘍,大家好
分享通俗易懂的維修視頻
讓維修從此變得很簡單
專業(手機,電腦,監控,家電)維修
喜歡我就訂閱我哦
https://www.youtube.com/channel/UCma9sHXyCIBoYmC0PzDmLNw?sub_confirmation=1
網上買了一個脈衝修復充電器,真的能修復壞電瓶嗎?測試後知道了 #我愛電器維修
#我愛電器維#修脈衝修復充電器#充電器
Bought a pulse repair charger off the internet the other day
Let's test it out today
Let's have a look at it. Can you put this
dead battery
It's just a battery that can't be charged.
can you fix it
Let's test it today
See if it fixes it
look at the back of this charger
Let's take a look at its parameters first.
Its output current is 6A
Well, the maximum output power is 90 watts
The output voltage is 13.8 volts to 15.5 volts
Applicable range 12 volts
220-120 lead-acid batteries can be used
First of all, let's test it
I have two batteries here
This big battery
let's test it
This battery is a normal
We see his voltage is 12.9 volts
Explain that he has electricity
Can be charged normally
Let's test the bad battery again
first look at his voltage
You see only four o'clock
Four point three volts
Because the battery is too low
use a normal charger
Sure, it can't be charged.
Now let's use this to test
See if it can be charged
give it this charger first
Clamp on to this good battery
let's take a look
The charging effect of this charger
After clamping it
This will show uh the temperature of the charging environment
His voltage is 13 volts
13 volts is the voltage inside the battery
Then plug him in
charger
You can see that the charging light keeps flashing
Then scroll here to explain.
He can charge this good battery
Then we put it
Clamped on top of this bad battery
Let's take a look and fix it
Let's watch after we cut it because its battery is too low
So you see, there won't be any display
we plug it in
charge it
Charge it up and let's see
The charging light doesn't blink either.
If it doesn't flash, it means that.
can't charge it
Then click the repair button
After clicking, the indicator light will flash.
Then this side also started scrolling and jumping all over
It's repair mode now
Let's fix it for an hour
Then measure it with a light meter
See how much voltage is in it
see if we can fix it
Well now it's been fixed for an hour
Then let's take a look
Unplug this power first
This will display the current voltage of the battery
See how much power is charged
It's eight volts now
It was 4 volts just now
It's charged to 8 volts now.
And then plug it in again
Explain that it can repair the battery
What about after charging?
Let's look at this light and it starts to flicker
It can be charged normally, right?
This is the charging current
This is the charging voltage
This is the current charging environment
Looks like this battery pulse restorer
still very useful
