在廢舊紐扣電池上夾2條線,原來還有這麼大用處,很多人都不知道 #我愛電器維修
我爱电器维修
89粉絲
我們的視頻是為了為觀眾提供有價值的內容,絕對沒有任何違規行為。 非專業人員請勿直接操作!
哈嘍,大家好
分享通俗易懂的維修視頻
讓維修從此變得很簡單
專業(手機,電腦,監控,家電)維修
喜歡我就訂閱我哦
https://www.youtube.com/channel/UCma9sHXyCIBoYmC0PzDmLNw?sub_confirmation=1
在廢舊紐扣電池上夾2條線,原來還有這麼大用處,很多人都不知道 #我愛電器維修
#我愛電器維修#家電維修 #電器維修
If there is such a used button battery at home
Don't rush to throw them away when the battery runs out
In fact, we only need to connect two wires to it
Its use value is very large
There are many people who don't know
This is a very useful feature
Let me share with you
First of all, let's look at a button battery like this
Its marked voltage is 3 volts
Uh if it's fully charged it's a new battery
His voltage is at 3.3 volts
Uh, generally if there is no electricity
His voltage will be lower than 3 volts
Let's measure this battery
take a look first
You see, this voltage is 3.04 volts
It means he has no electricity.
what about this time
We just need to find two lines
First of all, give the two wires a separate wire end.
You must remember to dial a little longer
Fold the two lines in half
Give it a thicker head
In this way, it will be more useful and firmer when connected.
Then the same line
just fold it in half
Then twist it again
After connecting the wires, the battery
It's a very big role.
First of all, these two lines
There is no need to divide the positive and negative poles.
Whatever you want, you can just connect it to it.
In this way, there is a line above the battery and a line below the line
and wrap it with tape
if at home
There is this kind of plastic clip or wooden clip
In fact, you can also clamp it
It's more convenient to clip it like this.
look
It's that simple, this little tool is ready
what can we do with it
Look, it's like home
There are usually broken LED lights like this
what if it breaks
We can use this battery to quickly
To test the lamp beads above to repair
LED lights are very useful
First of all, open the cover
it can not only
Check out these little lamp beads
What about some of these on the circuit board?
LED lights are fine too.
Use it to quickly detect
Let's see first
Let's test this first
like these lights
Usually there is a small lamp bead on the top that is broken.
If the light is broken, it won't turn on.
so what
We don't know which small lamp bead is broken, do we?
So we can use this to quickly detect
Connect these two wires to both sides of the lamp bead
you see after connecting
This lamp bead is not on, look, it is on now
we can see it look
it's on, right?
I'll explain it when it's on.
There is no problem with this small lamp bead
The contact is not good, you see, the contact is good now
If it is on, it means that the lamp bead is fine.
Then measure the other lamp beads
It's still the same. Just measure like this. It's also bright.
If we measure
What if the measurement is not bright?
It is necessary to reverse the position of these two lines.
measure again
you see it's that simple
You can quickly detect whether the lamp bead is good or bad
Is it very convenient
Look at this little lamp bead, no matter how connected it is, it won't turn on.
That means the little light bulb is broken.
Then use it to quickly detect
These small lamp beads used on the circuit board
You see it's bright too, right?
If it is on, it means that the lamp bead is fine.
how is everything
This old button battery is actually connected to two wires
It works a lot
