插座上安裝一個電源指示燈,有電沒電一看就知道,太實用了 #我愛電器維修
我爱电器维修
89粉絲
我們的視頻是為了為觀眾提供有價值的內容,絕對沒有任何違規行為。 非專業人員請勿直接操作!
哈嘍,大家好
分享通俗易懂的維修視頻
讓維修從此變得很簡單
專業(手機,電腦,監控,家電)維修
喜歡我就訂閱我哦
https://www.youtube.com/channel/UCma9sHXyCIBoYmC0PzDmLNw?sub_confirmation=1
插座上安裝一個電源指示燈,有電沒電一看就知道,太實用了 #我愛電器維修
#我愛電器維修#家電維修 #電器維修
hello friends
Today we give this 86 socket above
Install a power light like this
we put it in this position
This is the future
If you see that he has electricity
We just need to look at this light to know
we need three accessories
The first thing you need is this small LED light bead
we take it down
it's a bad power board
Then we remove a 1N 4007 diode
Then we look for a four-ring resistor of more than 200k
The organization of this resistor should not be too small
If it is too small, it will affect the life of the lamp bead
Then we disassemble this 86 socket
There are four buckles on the back, we will take them apart later.
After disassembly, we will make a hole in this panel
Now let's put this lamp bead
Weld these pieces to it
It's like this after welding
The cathode of this diode is connected to
The positive pole of the lamp bead
The two of them are connected in series
Then this quadrilateral resistor is installed here.
It is also possible without this diode
if it has it
Can make the life of this lamp bead longer
Now we put this lamp bead on it
Then we use a glue gun to fix the lamp bead
Let's take these two copper pieces out for it
put it here
We'll solder these two wires later
The two wires on the lamp bead are not divided into positive and negative poles.
We are directly connected to this 220 AC
So it's okay to pick up whatever you want.
Now we just solder the two ends
Already soldered
We now start shelling
we power it up
How about the brightness of this lamp bead?
power on
Let's see the light is on
This brightness is still ok for me
let's take a look
This power indicator light made according to my method
It will be fine for a few years
Well, I will share it here today
thanks for watching
