今天才知道，原來把錘子放到電飯鍋里，還有個特殊功能，長見識了 #我愛電器維修

I just found out today I put the hammer in the rice cooker There is such a big special magic many people don't know It is very practical in life we take this hammer Put it on the porcelain jar in the middle of the rice cooker Well, we can only press down this porcelain jar After pressing down Then this rice cooker can heat normally ok let's push it down Then turn on the switch on the rice cooker You see, the heating plate will be hot immediately. what can we do with it It looks like the LED lights at home are not very durable It usually breaks down after a while We can use it to quickly Fix this LED light Like these little lamp beads There is no way to replace it with a soldering iron. so we say Remove the light board inside Then put it on the steering wheel of the rice cooker heat it up Let's look at this heating plate Heating rate is very fast Then use a screwdriver to hold it down uh lest this The board above the light runs back and forth Uh, look carefully at the two sides of the lamp bead above. After this weld gap melts we can use this tweezers Pinch this little lamp bead off What about changing the lamp beads? Find a good lamp bead in the same way just put it back on let's see how Look at this lamp bead It's already gone, isn't it very fast? What about when the temperature is up? we can give it this rice cooker stop heating In fact, there is still some residual temperature on it. We use this residual temperature You can also take off the lamp beads on the top look Then what Follow the same method and put a good lamp bead on it on the line It's that simple to replace the lamp beads it's so convenient you see no above The original parts can be removed by this method this is it A special magical function of the electric rice cooker very practical How about Xiuya Ruyi Lamp? This method is actually much easier to use than a soldering iron. Very practical and very simple OK, thank you for watching the video