電線從根部斷了怎麼接?教你一招,修復後和新的一樣美觀又耐用 #我愛電器維修
我爱电器维修
89粉絲
我們的視頻是為了為觀眾提供有價值的內容,絕對沒有任何違規行為。 非專業人員請勿直接操作!
哈嘍,大家好
分享通俗易懂的維修視頻
讓維修從此變得很簡單
專業(手機,電腦,監控,家電)維修
喜歡我就訂閱我哦
https://www.youtube.com/channel/UCma9sHXyCIBoYmC0PzDmLNw?sub_confirmation=1
電線從根部斷了怎麼接?教你一招,修復後和新的一樣美觀又耐用 #我愛電器維修
#我愛電器維修#家電維修#電器維修
Power Adapter
This wire is disconnected from this root.
how to connect it together
Today I will share with you a perfect repair method
After repairing it
this appearance
It is exactly the same as the original appearance before
And it's also very durable
First of all, before processing
First remove the screw above it.
Like this recognizer, it is usually a screw
just above this one
After unscrewing this screw
then open this lid
Then take this line out to it
The first step is to put the
Cut the two lines of the recognizer first
Then what
This side is going to be broken soon, why don't you cut it too?
Next, unplug the two wires for it first.
Then what
Use pliers to pull out the core in the middle
pull it out
It doesn't matter if you unplug it.
find something to poke it out
You can get this thing out
After taking off the inner line of the protective case?
Then put this power cord
peel him off a little
To peel it off, make him a little longer than before
Then, here is the same, first pull out the thread for it
After pulling out the thread, then thread it on
Inside the original protective case
So we still use the original protective case
it's still very tight
and screw it in
twist a little bit
After screwing it up and then what?
we can over here with this case
Give him some 502 glue to stick him
Or it's okay
Just tie it like this
This effect is mainly to make it tensile
Then what
Separate the two wires and connect them to
on this circuit board
you see this is red this is black
uh this
The color is still connected according to the original color
Red is positive and black is negative
Positive and negative must not be mistaken
What about after making a mistake?
This TV adapter cannot be used
The most important thing is the positive and negative poles
So when we were cutting the thread just now
leave a little thread
Easy to distinguish the color of the wire
After welding, then what?
Reinstall it inside this power identifier housing
Let's take a look at the effect of squeezing
It's exactly the same as the new one, isn't it?
And it's also very wax resistant and very aesthetically pleasing
how is everything
OK, thank you for watching the video
