電磁爐燒IGBT燒保險?幾塊錢換上套件就能徹底修好,又能用2年 #我愛電器維修
我爱电器维修
89粉絲
2024年3月9日 #我愛電器維修
我們的視頻是為了為觀眾提供有價值的內容,絕對沒有任何違規行為。 非專業人員請勿直接操作!
哈嘍,大家好
分享通俗易懂的維修視頻
讓維修從此變得很簡單
專業(手機,電腦,監控,家電)維修
喜歡我就訂閱我哦
https://www.youtube.com/channel/UCma9sHXyCIBoYmC0PzDmLNw?sub_confirmation=1
電磁爐燒IGBT燒保險?幾塊錢換上套件就能徹底修好,又能用2年 #我愛電器維修
#我愛電器維修#家電維修#電器維修
hello friends
Let's repair a Midea induction cooker today
Its problem is that when customers use
heard a snap inside
Then there is no power and no response.
Let's take it apart now and examine it
After taking it apart
we have to check this insurance first
let's take a look
The insurance has burned out inside.
His snap is the sound of the insurance office
After the insurance burns out, we don't want to replace it directly.
Let's also check this IDBT first
The igbt must be broken
He won't avoid insurance until he breaks down
Let's measure whether the igbt is bad or not
We use the second machine of the 10,000-dollar watch to put into gear
to measure this
i g b t
This IGPT has been burned out and broken down
In such a situation, there will be some situations after he burns out.
It was the central bridge, and he also burned a piece of it.
some he doesn't burn out
Let's take down this IDPT first
And then check this 18 volt line again
And then there's this on the back
He uses patch
The triode pair tube is S8050 and the other is S8550
We put these all need to check
Then we check the rectifier bridge again
Look at the entire bridge, and he is also broken.
then in this episode of igbt
There's a pink glass tube that connects here
This is an 18 volt Zener tube
Let's measure him to see if there is a breakdown
He's broken down and burned out
This induction cooker burns insurance and fryes IGBT
The root cause of his problem is the 18-volt voltage regulator tube.
caused by short circuit
while we are repairing
If you want to solve the fundamental problem completely
We also need to put the latter
two slices
S8050 and 8550 are replaced by a pair of tubes
Because after the problem with these two it also appears
It is burning IGBT and burning insurance
The general measurement of the two of them is sometimes
He is soft
It means that the soft fault is used up, which means that the measurement cannot be made.
So we don't need to measure them either.
Just replace these bad originals
can fundamentally solve this
burning insurance issue
Connect this 18 volt unpressurized tube to the
The two sliced triodes
It is the pair tube of S8050 and S8550
Well, now the insurance rectifier bridge IGBT
18 volt no pressure tube
The tube on the back has also been replaced.
Here are the 6 bad originals that were replaced just now
When everyone is repairing
If it is found that the insurance has blown up like this
Check these three originals first
The three originals will be exchanged after we finish
Then replace the two pairs of tubes
In this way, we can relieve our worries
if repaired
This induction cooker will be fine for another two years
Now we put the induction cooker up
Then boil some water and try to see if it's fixed
let's try it out
No problem, see the water has boiled
Thank you for watching the video and see you next time
