家裏櫃門關不嚴，有縫隙怎麼辦？教你用一把螺絲刀就能輕鬆解決 #我愛電器維修

Cabinet doors won't close Don't look for a repairman Actually, we use a screwdriver ourselves you can fix it When repairing, we first open the door first look at the hinge Here are two screws it is possible to adjust the door We can adjust it ourselves Before tuning, let's take a look first. these two screws This screw can adjust the door left and right Uh, you can adjust its left and right to change back and forth Ah, you can adjust it left and right Let's take a look at the screw inside Just the screw inside It can adjust the front and back of this door It can be adjusted to change the distance between front and back Before calling this First let's look at the door the reason for it is you see This door is obviously going to the right. we see There's a big gap on the top side The bottom gap is relatively small, isn't it? Obviously, it's from the top to the right Offset Let's see if there is no gap on this side And the bottom is getting bigger and bigger Obviously the door is offset to the right. At this time, we need to open this door adjust it to the left we see The screw on the outside is what we just said It can adjust the door left and right, right? when we rotate it clockwise This door is adjustable to the right Turn it counterclockwise the door is adjusted to the left Now this door obviously runs to the right, right? So we're going to adjust this door to the left When debugging, it is counterclockwise. left is counterclockwise Let's turn it counterclockwise you can clearly see This thing is moving to the left, let's see Is it like this? The more he turns the screw, the more he goes left Yeah, look, we loosened all the screws Then let's close the door and take another look. see if i can close Hey, you can close it, right? It can be closed, but it is clearly visible. There is no gap here. But there is a little gap at the bottom Also, the gap on the top is obviously too big. bigger than the gap below Explain, when we tuned just now already over tuned It won't work if you turn it too far Now we give him the opposite direction Just turn it clockwise After you're done, try again. See how the door closes and opens You see now, you see that the two gates are equal same height and the gap above Let's see the gap below it's all the same isn't it Then open and close the door to test again look whether the door is open or closed It's very useful, isn't it? So everyone will encounter this kind of cabinet door again in the future It's not good, it's not good, it's not good. Just adjust the two screws on the hinge that's it This method is so simple OK, thank you for watching the video