洗衣機不排水自己怎麼修?教你這樣檢查,幾分鐘就能輕鬆修好 #我愛電器維修
我爱电器维修
89粉絲
2024年3月8日 #我愛電器維修
我們的視頻是為了為觀眾提供有價值的內容,絕對沒有任何違規行為。 洗衣機不排水自己怎麼修?教你這樣檢查,幾分鐘就能輕鬆修好
非專業人員請勿直接操作!
哈嘍,大家好
分享通俗易懂的維修視頻
讓維修從此變得很簡單
專業(手機,電腦,監控,家電)維修
喜歡我就訂閱我哦
https://www.youtube.com/channel/UCma9sHXyCIBoYmC0PzDmLNw?sub_confirmation=1
#我愛電器維修#家電維修#電器維修
How to repair the washing machine can not drain
Today's video to share with you
look at this washing machine
put it on dehydration
then press the start switch
Looking at the display above, everything is normal.
But you can't hear the sound of drainage
Like this kind of washing machine that can't drain?
It generally matches this motherboard
Or the drain motor is related
during my repair
Actually like this
The drainage motor is broken more often
let's take a look
Look at the water over here
Nothing comes out
now let's turn it off
Then turn off the faucet of the washing machine
Then unscrew the water inlet pipe
After unscrewing it
Then unplug the power cord of the washing machine
washing machine not draining
In fact, this failure
It is relatively simple to repair
when we're done
Put the back of the washing machine first
Remove the iron shell first
Here are just a few screws
Let's take a look after opening the back case
Below is the white one with a small steel wire
This is the drainage motor
Then let's power up the washing machine
Then turn on the switch for it first
or call it first
dehydrated uh this gear
Then press start for it
Take a look at the steel wire on the drainage motor
did you pull back
take a closer look
and nothing happens
Didn't pull back, did it?
where my finger is
It is the traction wire of the washing machine drainage motor
then unplug the power
First look for the two wires above the motor
This is a customer
Previously replaced this drain motor
Get it out of the thread first
Next, connect a multimeter to it
Hey, right, after connecting the multimeter like this
what's next
or open it again
Or adjust to the same gear for drainage
Well, then click start to see this multimeter
Check to see if there is power on the motor
You see, there is 237 volts
There is electricity and then this motor
The above steel wire has no pulling action
hey didn't pull
If you don't work, that's it.
It's the drain motor that's broken.
You can't work with electricity, right?
that must be its problem
What now
Let's just remove the bad motor
and now it's a new motor
It's very easy to install too.
I just forgot to take a video for everyone when I dismantled it.
Check it out when you install it.
Give it the wire first
Get it inside this plastic clip
after getting it up
Then this fixed motor
There are two screws on this bracket
Just like this, one above and one below
Hey, screw it firmly and it will be fine.
did you see the end
Then connect the two wires above the motor to it
Just put the tape on and that's it
how is it
This washing machine does not drain
It's that simple and it's fixed
