廢舊電源板別扔,拆幾個二極管秒變降壓電路,生活中用處很多【我愛電器維修】
我爱电器维修
89粉絲
我們的視頻是為了為觀眾提供有價值的內容,絕對沒有任何違規行為。 廢舊電源板別扔,拆幾個二極管秒變降壓電路,生活中用處很多
非專業人員請勿直接操作!
哈嘍,大家好
分享通俗易懂的維修視頻
讓維修從此變得很簡單
專業(手機,電腦,監控,家電)維修
喜歡我就訂閱我哦
https://www.youtube.com/channel/UCma9sHXyCIBoYmC0PzDmLNw?sub_confirmation=1
#我愛電器維修#家電維修#電器維修
hello friends
Power adapter in life
used more
if we meet
9 volts or 5 volts are broken
What should we do if we don't have any suitable ones at hand?
We can actually use this 12 volt
Simply make a step-down circuit for it
It can replace 9 volts or 5 volts
The method is also very simple
These broken electrical appliances in the house
We must not throw away these motherboards
This is a bad power adapter
like some other small appliances
There are also such diodes on the top
The type of this diode is 1N 4007
we can take it down
To remove these diodes we
Let it be welded in series
If you don't have a soldering iron at home
It is also possible to screw it together directly.
It looks like this after welding
I have 10 connected in series now
Today we're going to use this 12 volt power supply to make
this is a good power supply
We don't need to cut the cord
because after cutting
We might not be able to use this in the future.
We can find two wires
the middle
The middle one is the positive pole of the power supply
we put it
insert it in this
The blue wire is connected to the outer layer
This is the negative pole outside
Positive terminal receives negative terminal of diode
Then here I connected three diodes in series
led
If you don't concatenate complex cases
The voltage measurement is inaccurate
It will measure the high voltage
we now turn on the power
Then use a multimeter to measure its output voltage
let's test this
What is the total power
1.19 billion This is a 12 volt power supply
Let's go through a diode and test it again
11.28 it dropped to 0.65
probably less than
0.7 volt drop
A diode can drop 0.7 volts
4 diodes let's see
9.39
If 12 volts wants to make it 9 volts
We just need to connect 4 diodes in series
Let's measure how much the 10 diodes drop
down to 5.64
If we want to get 5 volts
It's best to use a 9 volt voltage
Connect 6 in series
A diode can drop 0.7 volts
6 is 0.6 is 4.2 volts
So 9 volts minus 4.2 is exactly 5 volts
No need to use 12 volts
12 volts we need to string this
Too many strings are more troublesome
This step-down method is also relatively simple
we just have to remember
A diode can drop 0.7 volts
Let's use this to calculate
You can know how many diodes are needed
You don't actually need a multimeter
calculate
When it comes out, we screw this all together
Then put that bad power supply
Let's cut this thread
Just cut it out and stick it on here
We'll get some tape after it's attached
just wrap it around
Alright friends, the video is here
see you next time
