耗時25天DIY一架自己的雙尾蠍無人機(TB001)丨魔界造物

魔界造物
17粉絲
打造一個DIY版雙尾蠍無人機
◆製作設備材料
xTool激光切割機,拓竹X1CC打印機
材料:/5mmkt板/3mm椴木層板 /碳纖維管
遙控器:FLYSKY PL18
電機:拆解徠芬電動牙刷
電調:6s電調
舵機:4.5G舵機
電池:博氏6S 22.2V1500mah 120C
錄像 :SONY FX3 /TAMRON28-200
iPhone 14 Pro Max/Insta360 Go2
錄音:猛瑪LARK MAX/ Sony ECM-B10/Sony ECM-W3
航拍機:DJI AIR2S
穿越機:
MAK5 DC O3
DJI O3
F405 V3 50A
T-MOTOR乘風V3 kv1750
#雙尾蠍 #DIY #硬核 #航模 #模型 #TB001
----------------------------------------------------------------------------------------------------------------------------------------------
如果你喜歡的我頻道的話,還請訂閱我的頻道,及時接收更新以及動態信息喲~
訂閱我的頻道:https://bit.ly/2SfX7jT
謝謝各位的支持!
Check out our new double-tailed Scorpion drone.
Yep, that's right.
It's the one the Air Force snagged from SF Express recently.
So, we've gone ahead and built our own.
It's a bit smaller in size,
with a wingspan of just 2 meters.
But I've kept the soul feature of airdropping fire extinguishing bombs.
This time, we've added landing gear too.
No more hand launching required!
The body of the aircraft is still made of KT board,
with reinforced landing gear positions using aerospace-grade panels.
For the nose and engine sections, we've used a lot of 3D printing to achieve curved surfaces.
To recreate that smooth look.
The wings are also made of KT board,
with added carbon fiber tubes inside for strength.
And the wing shape is a standard aeromodel flat-convex design.
Just a little trickery.
But it still feels pretty authentic.
Elevator,
Rudder.
Ailerons, we've got those too.
And retractable landing gear.
Plus, the 3D-printed airdrop mount we made.
The soul of the Scorpion,
dropping fire extinguisher bombs.
What do you think?
Thumbs up or down?
Worth a like?
Alright,
let's give the throttle a test.
Check the power-to-weight ratio.
Power's there,
but it might be a tad underpowered.
Not feeling it.
Motor seems a bit small.
Plane's too heavy.
But with this big wing,
flying shouldn't be an issue.
Sort of like a glider.
Let's double-check the control surfaces.
Ailerons, right and left, all good.
Elevator, up and down, up and down.
Rudder, right and left.
Wind's coming from this direction,
going this way,
turning towards that.
Alright.
Ready.
Making a turn.
Here we go!
Mini Scorpion, charge!
Oh, the handle!
This wing...
Throttle's full now.
Won't be going too fast.
Check out the wing's camber,
curved like that.
Alright, gear up.
Retracting.
Looks much better up.
Turning right, bit windy.
Let's do a low-level pass.
That wing looks wobbly, might break off.
Turning right.
Flying super low, skimming the canyon.
Lower than visual height.
Feeling it.
One more time.
Hope it can climb back up!
Full throttle, climb.
Alright, ready.
Bomb away.
3, 2, 1, drop!
Direct hit! Right on the dam.
Removing the action cam next,
trying some stunt flying.
Rolls, no problem.
Then a barrel roll,
nearly snapped the wing off.
Thought we were about to see flying bikes again.
Stunt flying is a bit too much for a long-endurance drone.
Let's check the landing gear first.
Landing gear deployed.
All good.
Alright, preparing to land.
Here we go.
Descending.
Aligning with the runway.
Whoa, smooth.
Perfect landing.
Rare to see a plane stay intact in recent videos.
We also tested
the extreme parameters of this Scorpion.
30 minutes of max airtime is definitely doable.
Cruising speed around 45 to 60 kilometers per hour,
so a range of over 25 kilometers is no problem.
And a payload of 100 grams is fine,
like the weight of a smartphone.
The outdoor power supply works well.
That's all.
That wraps up our test flight of the double-tailed Scorpion drone.
Thanks for your likes, follows, and support.
Your support is what drives me to keep improving.
I'm Pudding,
See you in the next video!
Bye-bye!
