In Teil 4 unserer Videoserie zu den Grundlagen der Teilentladungsprüfung erläutert Caspar Steineke, Experte für Teilentladungen (TE) und Mitentwickler der MPD-Technologie von OMICRON, inwiefern das für Prüfumgebungen aller Art typische externe Rauschen und andere Störungen die Zuverlässigkeit von TE-Messdaten beeinträchtigen können. Er beschreibt die verschiedenen Verfahren und Techniken zur Trennung von Quellen, mit denen sich die Auswirkungen externen Rauschens zuverlässig minimieren oder sogar eliminieren lassen, um sehr genaue TE-Messungen und eine verlässliche Analyse und Interpretation von TE-Messdaten zu ermöglichen.
00:00 - Einleitung 00:14 - Wie wirkt sich externes Rauschen auf TE-Messungen aus? 00:43 - Wie lassen sich die Auswirkungen externen Rauschens minimieren? 02:12 - Welche Tools werden zur Trennung von TE-Quellen verwendet? 03:15 - Fazit und Kontaktinformationen
Teilentladungen (TE) sind ein zuverlässiger Indikator und gleichzeitig eine Hauptursache für die Verschlechterung des Zustands der elektrischen Isolation, die wiederum zum Ausfall des Betriebsmittels und zu kostspieligen Betriebsunterbrechungen führen kann. Die regelmäßige Durchführung von TE-Prüfungen ist ein zerstörungsfreies und hochgradig zuverlässiges Verfahren zur Bewertung des Isolationszustands elektrischer Betriebsmittel. Sie liefert Benutzer:innen wichtige Informationen für die Planung rechtzeitiger Maßnahmen zur Gewährleistung der dauerhaften Funktionsfähigkeit und Verfügbarkeit der Betriebsmittel.
Hello everyone, my name is
Kasper Steineke, I am one of the
developers of MPD technology and
today I would like to talk about the topic of
partial discharge testing
[music].
External noise is the enemy
of every
tee measurement. Just imagine
an acoustic precision measurement on
a busy street in front of the signals The
signals that the equipment emits are
very small and at the same time there is
a lot of noise
nearby. When measuring PD, the main thing is
to separate the noise from the signal
and this can be done in
different ways.
In the laboratory there are very good
ways to reduce the noise
E.g. through shielding, but this is also
a question of cost. Are you willing to invest a lot in
a perfectly shielded laboratory
or would you rather spend the money
on procedures to eliminate
existing noise? On site
it looks completely different because it's about
coming from a very noisy environment to
filter out a meaningful signal
for dealing with this noise and
for filtering out meaningful
signals for useful measurement results
there are various
instruments most noise in the
real world is spectrally limited the
hot in the frequency spectrum within a
limited frequency range
so after analyzing the interference level we can
freely one Select the measurement frequency and place our
measurement in a frequency range
that is least affected by noise.
If this does not work due to very
broadband noise that
occurs sporadically,
then we also have the option of
eliminating this. Gating is about
detecting external interference that represents noise and to remove these from the
measurement
when we carry out measurements on larger
equipment, especially
on rotating machines and
transformers, we have several phases
and large geographical dimensions, which
means that there can be several sources per equipment.
If we then look at the prpd,
we see the phase-resolved diagram
superimposed the entire activity
so that these measurements make sense,
it is helpful to separate the individual sources
from each other and look at them individually.
For this very purpose
we have invented two mechanisms, one
is multi-phase
which also accelerates the measurement of multi-phase
equipment, the other
is one Multi-frequency separation Separates the
sources based on your individual
frequency signatures
[music]
I hope you found the
information interesting Omicron has
more than 20 years of experience with
partial discharge testing and we would be
happy to work with you in this area