🥇🎗🎨精緻宮廷供品工藝！傳承千年的犀皮漆的傳統精湛手法，令人稱讚叫絕😄👨‍👩‍👦‍👦👍👉 #新瑞大視野

The old master kept polishing the jar in his hand and the water flushed the jar with a flash of light and the light was as flat as a mirror This is the original Huizhou Xipiqi from Nansong, which used to be a tribute to the palace. The craftsmanship of Xipiqi is extremely complicated. The birth of a qi qi often takes a year to make With the inheritance of generations of memory, modern China will make Xipiqi in less than two hands, but it is the cornerstone The qi qi he made has been internationally recognized and even the work has been collected by the Palace Museum to make such a perfect work of art You have to be able to bear the pain of birth and you have to be able to endure the temperament and you have to be able to achieve art with time. Xipiqi is completely different from our traditional porcelain craftsmanship First of all, you have to design the shape of the qi qi on the painting board in advance and then use the straw as the internal filler of the fetus and then you have to cover the straw evenly with the plaster Then use the plaster to keep applying and pulling to make the shape of the fetus of the jar and wait for the plaster to harden and then use the sandpaper to polish the fetus In this way, you get the fur that can be used for the subsequent period of time. A piece of Xipiqi's qi qi is completely made by birth, so it can be used. The traditional ancient tile is burned to form powder As the skeleton of the qi qi, the qi qi is carefully smeared on the fur and this step is called the ash and then the surface is pressed against the ash and repeated several times until the qi qi reaches the required thickness The straw and plaster in the fur need to be glassed and the legend of dragging it to change the bone comes from this Next, the liver will start to adjust the face. It is the key to the production of Xipiqi and the mystery of Xipiqi. The process of adding the face to the fetus is called hitting the face Then use different colors of 7 to 7 to color brush 15 layers of 7 only to increase the thickness of 1 millimeter Every time you go up, you have to wait for the front layer of 7 to dry completely in order to make Xipiqi more powerful, but you can creatively introduce the golden wave to replace the yellow 7 and then continue to go up for 40 or 50 times And polishing is the key to deciding the finished product because the thickness of the seven layers is often only a few millimeters between the good and the bad will determine the success or failure of the work In order to get the effect of Xipiqi's light visible to people, the liver can be thrown away at the end The whole process is to use both hands to polish the palm of the hand has been almost finished so that such a magnificent light can shine on people's perfect 7 you are touched