Restoring a $300 Honda Civic On A Budget! | EP. 4

BoostBrigade
1 follower
5 Video Views·Feb 3, 2024
► Get entered to win this car here! https://smplclothing.co/
►Check me out over here as well!
INSTAGRAM (@SmplBuilds) ► https://www.instagram.com/smplbuilds
TIKTOK (@Smplbuilds) ► https://www.tiktok.com/@smplbuilds?lang=en
welcome back to episode four of the $300
Honda Civic build in the last three
episodes we got a ton of work done to
this car as you've seen with a bunch of
new parts that we refinished and
installed we started disassembling the
car getting it ready for the engine swap
cleaned up the body a little bit removed
the head to see if we can fix it before
the Swap and that led us to buying this
parts car with a good engine and a few
other parts that we were going to need
we then pulled the engine on our car and
that leads us to today in today's
episode we now have two Hondas that
we're working on so we're going to get
started on the parts car we're going to
take out the engine first and foremost
so we got a couple things to disconnect
couple things to drain remove the axles
let's get started on taking that engine
out we're going to do our best to try to
get it into this Honda and see if we can
get it running before the end of this
video but we'll see how far we can get
let's get into
[Music]
it
[Music]
[Applause]
[Music]
okay we are almost done down here on the
bottom end we just got a couple more
things to disconnect everything up top
should be pretty much disconnected but
we're going to drop it down in a second
cuz we got to get to that power steering
line we're going to drain some power
steering fluid so that we got to
disconnect that line we just got these
two oil cooler lines or transmission
cooler lines uh down here disconnected
and then we disconnected the axles from
the transmission as you can see here
both are hanging down disconnected the
tie rod end and the lower ball joint on
both Sid sides and then we just put them
back in and just hand tighten the bolts
so that we can put this car back on its
wheels and roll it out of the way when
we need to the torque Mount here which
was already just kind of destroyed so
we're almost ready just a couple more
things here and we're about ready to
pull the engine out of the dut
[Music]
car so we're jumping around just a
little bit we're going to clean up this
engine bay show you guys a couple before
and after it's not going to be the
prettiest and uh best engine bay
restoration just going to clean it up a
bit while the engine's out make it look
a little bit prettier we got couple of
the lines like the power steering hoses
uh sealed up so we don't get any water
where we're not the whole harness here
is in this garbage bag duct taped up let
me show you a couple of fours on this
thing and a couple Afters after I clean
it
[Music]
up
[Music]
[Music]
you
so we're about ready to get this engine
out of the donor car and we're going to
lift it up clean that engine up a little
bit we got to swap the manual trans from
the engine over here we got to take the
manual trans off of our engine and then
swap the automatic trans off of this
thing and uh swap a couple parts over so
first things first let's get this engine
up and out of the parts car and uh go
from
there
[Music]
[Music]
w
[Music]
[Music]
w
[Music]
up guys quick update since you last saw
us we completely stripped down uh the
parts car almost to the bare shell I'll
show you guys a couple of things that we
have for sale here be sure to hit me up
on Instagram if any of this stuff
interests you we got a massive pile of
parts we got back seats we got the back
bottom seat we got the front seats that
are super clean here uh we got a bunch
of interior trims pretty much the whole
entire interior is available we got a
really nice uh cluster here got the
trunk harness with the tail lights local
pickup in central New Jersey that's
where I'm located so all this stuff is
available the center console all that
stuff is available hit me up on
Instagram DM so I can make a couple
bucks back on this before we scrap this
thing I wanted to I saw a lot of you
guys comments on fixing this and um and
bringing it back to life but it just
would have been more hassle than it's
worth so I needed to take the engine
from this obviously and at that point
might as well just went all the way so
I'm having some fun tearing this thing
apart I hopefully I can help out some of
you guys with some of these parts here
cuz these are pretty clean Y8 block that
is for sale as well about 200 bucks for
that uh 200 bucks for the automatic
transmission that we took off so selling
everything pretty cheap let me know this
is our manual trans going back in we'll
get all that sorted and the car should
be running very soon and then it's off
to paint I'm going to start swapping out
a couple of these things here like this
radiator here I'm going to swap this one
out for this one cuz this one is a
little bit older and dirty and crusty so
we're going to swap out this one that's
from the parts car it's a little bit
better and then we're going to swap out
some of these hoses here we do have that
new hose kit that you might have seen
that he dropped off with us and this car
is going to start coming together very
[Music]
[Music]
fast
[Music]
he's making the
[Music]
part
engine is up in the air about to go
[Music]
in we got the engine in late last night
super stoked that that is in we got a
couple things to button up on the bottom
I'm going to go underneath and put the
axles on right now I think everything
should be buttoned up from the bottom
but check all the connectors from the
bottom and the coolant lines and all the
fluid hoses and whatnot and then when
Dave gets here he's going to help me
button up the top uh plugs the the
harness all back in and hopefully pretty
soon get a first start for you guys with
the new engine in our giveaway car yeah
this thing's going to be running and
driving again really soon super stoked
so here we go let's get to
[Music]
work
okay the axles are in next I want to
take the fenders from our parts car and
finally slap them up onto
here all right fenders are on that looks
really good fits up perfectly now up
next I think I want to just see if I can
tackle a little bit of this project so
we do have the 99 headlights from the
parts car so they are a little bit dirty
the the housing or the lens is is uh
kind of like coming apart this one is
all dirty on the inside back behind here
and the clips are kind of peeled up I
don't know what they did hopefully we
can get them to work good uh and no
condensation you just got to make sure
you seal it up nicely I've never done
anything with headlights uh qu like this
before so this will be a first it'll be
fun but I'm pretty sure he was saying
that these are the CTR uh replica
headlights um not quite sure but would
be pretty cool to have something like
that as a part on uh the giveaway car so
I'm going to try to take the lenses off
here see what I can do about getting
these off and then cleaning up the back
a little bit um making sure that they
look nice and clean let's see if I can
get these uh these headlights off these
housings off and then go from
[Music]
[Music]
there
[Music]
so this is pretty cool I pretty much
broke it down into its four main parts
so we got the lens we got the inner lens
you got the housing and then you have
the I gu I'm trying to think this is I
guess the main uh bulb housing so that's
pretty much it there's only four parts
of this headlight it's completely dirty
really nasty as you can see in here
there's a bunch of just crap that leaked
into this headlight over the months that
it sat that's obviously you can see this
housing is
absolutely disgusting just so much crap
in there so we're going to put these
outside and uh rinse them all down
that's pretty sweet I've never done this
before all I needed was two Flathead
screwdrivers I know you can use a heat
gun to speed up the process to get the
uh lens detached if it's not old and
brittle but this one was like half
halfway already open so it's a little
bit easier for me without heat but you
can and should probably use heat if
you're doing this on a newer headlight
so let's get this outside wash it off
and then go from
[Music]
there all right that is one headlight
fully cleaned out pretty clean so from
here I think I have to find out what
ceiling I have to use for this here and
then we can start plugging everything
back together so then I'm going to put
this back together and then update you
guys when I figure out what to do with
these
[Music]
headlights all right this is me in the
future real quick to update you guys on
the headlights uh we sealed them up and
everything is nice and dry now so
completely sealed with that silicone
these things are super clean they do
need still a little bit of uh compound
and buffing but these headlights turned
out pretty
[Music]
good
[Music]
good
[Music]
all right everything is buttoned up down
here down below we just drained and
refilled the gear oil for the
transmission and everything else is
tightened up suspension is tightened we
got the manifold on everything lines up
the hanger goes onto that so we got to
get the muffler still installed so it's
going to be a little bit loud but O2
sensors are on drop it down button up
the manifold and then we're almost ready
for first start on the new
engine here we go let's uh let's hope it
kicks over first try here we
[Music]
go all right we're thinking loose ground
so we're going to put that on tighten it
up and give it another shot hopefully it
starts right up we are also extremely
low on fuel so that could be a factor as
well
but what you eating bro some WWA pizza
with some grap
[Laughter]
fluid quick gas out break with some Wawa
Pizza Wawa Pizza
is not good but it does the job you
hungry what they say 16th times a charm
gas is in it grounds are on ground
wasn't to the valve cover now it is they
fixed up a couple things so let's see if
it'll uh see if it'll turn
over
[Music]
[Music]
yeah baby yeah baby let's
go let's go something stupid bro we were
looking at it sideways
[Music]
s
[Music]
nice s perfect oh it's nice and quiet
bro oh my God headers are a little bit
Smoky but that's about the only issue we
got Dave is a legend we had a couple of
the wires mixed up on the distributor
cap cuz the logo the image we were
looking at was super wonky so that's
sorted that was our simple stupid fix
all the grounds are good everything is
good so we just got to do cooling stuff
and all
that that was
nice dude Dave man this was this was a
long
process but we got it in and uh couple
more things to do of course on this
thing but she's running uh I didn't
drive it yet hopefully I think it should
drive as well but runs and drives I was
super stoked that this engine is finally
in here and it sounds really good better
than both of these cars ran it sounds
cuz we got a bunch of stuff cleaned out
the cooling system completely flushed
out so guys be sure to get entered into
this car click the link in the
description simple clothing.co but most
importantly jump into the motor club
that's going to get you entered with 20x
bonus points into every single giveaway
that we do and our next one that we
already have planned out is uh it's
going to blow this one out of the water
so make sure you're entered into there
you're going to be automatically entered
into this one and into the next one that
we're super excited about uh and every
one that we do in the future so simple
motor club check out the link in the
description go get entered to win this
car so I'm not exactly sure where this
is going to land in the video but I
wanted to get this in this episode
before closing out I want to put a
couple of these things on right now and
show you guys what the car is turning
out
like
[Music]
is not going to be a show car by any
means but definitely going to be a
pretty cool car and a nice daily for one
of you guys to drive around in Dave is
on his way right now to pick it up uh
and bring it over to Mo they're going to
get it painted for us I'll show you guys
the color that we went with uh in about
a week or so hopefully that'll be in the
next episode I'm almost positive it
should be care of the rust spots one big
dent on the back make sure to get
entered jump on to simple clothing.co
get entered is very cheap to get entered
to win this car if you want to get
entered into every single giveaway that
we do jump into simple motor club
shifter feels amazing with the new
bushings the body is all put together
engine is in runs drives feels really
good feels really smooth so we still got
a bunch of exciting things going down
with this car stay tuned to see the rest
of the progress this $300 project is
coming along really nicely so I'll catch
you guys in the next episode
[Music]
[Applause]
yeah
[Music]
