Mua GÌ Bán Nấy- Máy Xúc Giá Rẻ Vừa Bán Vừa Cho Không Lo Thiệt Thòi | Xuân Mạnh Vlogs

Xuan Manh Excavator
86 followers
Mua GÌ Bán Nấy- Máy Xúc Giá Rẻ Vừa Bán Vừa Cho Không Lo Thiệt Thòi
Xem thêm :
#XuanManhVlogs #komatsu #excavator
--------------------------------
© Bản quyền thuộc về Xuân Mạnh Vlogs
© Copyright by Xuân Mạnh Vlogs ☞ Do not Reup
Dear ladies and
gentlemen, in difficult economic times, there are
fewer machines and more machines, so the owner needs to sell
an excavator to get money to pay off the debt.
Currently, our owner also has
five or six children, but Because now there's
not much work to do, so I'm selling one off and
today I want to introduce to
you a cheap excavator that can be used to
work in yards, can dig
normal foundations and a new excavator. The price to invest in a
startup is very competitive,
guys. And today I want to
introduce to you a Komatsu
pc58 uu -5. This is a -5. It's not a
low-end one. Dear friends, the
owner is offering this one for sale at a
price of 130 million VND.
What can we buy for 130 million VND? 130
million VND can we
buy a SH or can we buy a The
car is an old car that
can protect us from the rain and the sun. It costs
130 million VND. If we
buy an SH, when we go out,
we have to spend money on gas.
As for a car, when we go out,
we have to spend money to refuel
it, but with that 130 million VND, if
you buy this excavator,
you will lose money on oil, but in return, you
can Earn money, 130 million VND
we deposit in the bank, now the interest
rate is 0.51 ph per year, so that 130 million is
not worth much, but 130
million VND per child per day can be
deducted from the grease. You can also earn 15
million a day, guys. So
why don't we invest in a machine?
Boss, as you can see right now, there are
many without machines,
but right now we're at home. All
four or five of them are like this, there's a whole bunch of them
like this, there's a lot of drivers, but if
you only park them for one day, you
know how much money you've lost,
so I'm selling this one off.
Now, I will review
this Komatsu PC 58 in detail for you all to
refer to. This one,
if you are currently watching
Manh's videos, there is nothing strange about
this one. I'm still digging the
foundation, making ditches, making troughs, doing
everything as usual, no problem. If
you come and see, you can test the
machine directly at the yard. The yard is
very large for testing. There's always
no need to worry about testing, and especially since the machine is a
consumer machine, not a machine that has been tested by a
technician or a real person, so you
don't have to worry about
cleaning or the problem of what is this? Right
now, if you have it for sale, it
only has one toothed bucket.
This flat bucket belongs to the V, so I'm
not selling it. I'm just borrowing it temporarily.
This Komatsu pc58 can be quickly disassembled and assembled.
There is a hydraulic quick disassembly to help
it replace and disassemble the bucket, hammer and pliers like
this. There is a hammer line waiting here.
We can attach the hammer. Attach the hammer to
this leopard, you need glue, then from the bottom
here, quickly disassemble. It's still beautiful,
the parts like the needle are not
broken, guys. And the
parts of the cylinder are leaking oil due to
this side. This is it. This cylinder has
had its seals and PH replaced.
These old models cost more than 100 million, but they say they are
still original, so I can assure you
that they are not. That's not to say that for more than
100 million, you have to ask for this or
that. Now let's look at the undercarriage and
chain of this car.
Here about the undercarriage and
chain of this car. Here's the undercarriage. The undercarriage is
very dry. The undercarriage is very,
very solid. The undercarriage is not
cracked or bent at all. Even
this part of the moving leg is beautiful. Like
this, it's also sparkling, guys.
Now let's see if
its Circus Bridge chain is still good. Here's this
part. Here's the chain,
this one. The sprockets are
still relatively even, which means they ca
n't compare to a dump machine,
but compared to a civilian machine like
this, they're already stable.
This part of the star rim, the star rim is still
very thick, this one. As for just
moving, if this one stands and parks as a
sandbank, then shovels sand for construction materials,
then it's all right. You don't have to worry
about the problem of replacing the bridge or chain.
This is its bridge. You can You can
see that the
ball is round and round. It's
hard to find a ball like this. For a machine,
we have to pay attention to the chain.
If the chain is still good, the machine
will surely still be there. Okay, bridge. If the chain is too broken, it
proves that there is too much movement,
right? This is the chain bridge.
Now we will go around to the other side
to see if the chain bridge on the other side is
still relatively
good. This chain bridge on this side is also the same.
Similar to the other side, it's all the
same, so here and there, the inside part here and there is also
the same, including the star rim, the slanted rim,
it's still
relatively good, not too
worn and called it not too bad. It's
new. This part requires glue. You
don't have to worry about anything breaking.
This part requires
RC cylinder. This part is not
broken. There are no cracks at all. You
need three
pieces.
This is the type of counterweight that rotates
in the chain, so it's very suitable
when you move into places
like digging foundations. Here,
open this lid. Up here, inside
is the black oil tank and This is the hydraulic oil tank.
This is the main line and the
battery pack is in here. Here is the drawer and
chair compartment of this car. All of the drawers
of this car have been edited. You
can see the drawers and chair compartment of this car. It was taken to the side that specializes in
hydraulic work to clean up. Tho Dong wasted
everything. So, rest assured, don't worry
about this one. If you buy this one,
you don't need to clean up the drawers
anymore. This one is just an adjustment. If you pop
out the drawer, the pump has already been
adjusted and finished
by
a hydraulic workshop. There's a Ben here, there
's also a Ben. This Ben,
in addition to its drum function, is We
can climb a dump truck, you know,
this part is fine, the engine is a mechanical engine
so you don't have to worry about electricity.
This model is quite good to use.
This one uses a 4 d 88e engine, guys.
Hey, here's its machinery. The pump is
a little hidden. The pump is located
deep inside. The pump is located deep
inside. This pump has already been done. It's been
done and cleaned up. That
means Our owner, before that,
it sounded a bit bad, but he
repaired it all, so he doesn't have to
worry about the pump or the drawer or
anything. This is the engine. That's it. Is that
you? It's not that the
machine looks bad on the outside, but the engine is
ugly. Although the outside of this car is not
beautiful, here from this engine part
you can see this engine
and the paint. Then these screw rings and
these pipes are very shiny,
very beautiful. This is
also quite reasonable. Besides,
let's take a look in the cabin to see if there's
anything else left here
. This is the operating place where the driver opens
this cabin. This
is a bamboo engine. This is a
bamboo engine. This is the moving part. That's
the turning part. Here on the right side, this
side is the saddle and this side is the
we
can leave this leg This is the
moving part of this one, the hammer shot
has been made into this moving leg
this leg moves when we want to
move then we leave it like that we
move but when If we want to shoot the
hammer with that moving leg, we will press
this button. This one has made the
moving leg to make both the hammer and move it at the same time. The
throttle
is now made with this throttle. Hey, I've built
this gas ladder. No, I don't use its old gas station
anymore, that's
all. The
appearance is quite similar. This is not necessary. This is
especially the parts that are very easy to
crack and break. But this one It
still looks very cool. No, it's not that
nonsense.
Now I'll ask the owner to
test this one out a bit to see
how the engine and motor work. Let's take a look. It's
an instant hit, guys. Even though the
device is old, it's an old machine, but if it's on and
everything works, it's not like it's an
instant trigger. It's easy to eat
this one right away if you return. It's comfortable to stand and make climbing materials
and then clean up at home.
Don't worry,
this kobu line is a
bit slow, but in return, it's very
strong. It's not a bad idea to go crane and destroy
things. There's nothing to worry
about, this one will add another flat bucket
to scoop sand materials onto the car and then
everything will be comfortable.
Is the hydraulic system good?
Come on,
this move is very
beautiful. Let's move on the ground. Let's cut the
chain.
Try cutting the chain. Cutting the chain on one side is very comfortable. This
one cuts the chain very strong. It can
also rotate in a circle.
Cut the chain. Comfortable and strong, the machine is
very strong.
Cuts comfortably.
Okay, here the chain is cut round and round. In
general, this machine has been completely overhauled by the owner and ready
to work. Mainly, the
first is the internal overhaul. to do but
now she has too little work so I want to marry her
off so I can
change that job. With 130 million
VND, it costs money to buy a car
to go out and 130 million VND to buy
an excavator. In terms of working and
making money, which one should you choose?
In my opinion, I will choose one that is
profitable for me. Anyone who
wants to use the Komasu
pc58 minus this one can contact me. Follow the
phone number on the video to watch the device
live at Dong Anh Hanoi, please
come and test it live and feel
if owning this device is worth 130 million
VND, then my video will
also ask for permission. ends here
Thank you for watching
video
I
