Repair & Restoration - Most Amazing Woodworking Job Ever

Amazing Traditional Craft
29 followers
60 years ago, a broken oak tree was brought to Mr. Harada's house.
Mr. Harada not only makes oaks and barrels, but also puts effort into repairing them.
The chisel is loose and the bottom plate is also off.
He changes to a new chisel using an old method.
Repairing an oak tree requires flexibility, so he uses something that is strong against bending.
Depending on where the oak is grown, the thickness and length are different, so he selects the right oak for each purpose.
He brings it back to the workshop and cuts it into thin pieces to adjust the thickness.
When the thickness is even, it waves cleanly.
It's time to start repairing.
He removes the old bark, but leaves one piece intact.
If I remove this, the oak will fall apart.
That's why I leave one piece intact.
The term, removing the bark, comes from that.
He makes the bark according to the size of the oak.
With the unique skill of the craftsman, the strength is created by accurately bending the oak.
A strong bark is completed.
He puts this in.
Because the tree is fragile, it breaks in a small amount.
When one bark enters, he removes the old one that was left.
This will not fall apart.
He replaces the bottom board and puts in the remaining bark.
It's in.
The oak from 60 years ago has come back to life.
The oak is a tool that can be used while repairing.
The culture of repairing has disappeared,
so I hope to regain that culture.
A few days later,
the client comes to pick up the repaired oak.
It's perfect.
I was worried that the old bark would fall apart,
but I'm relieved to see it now.
Thank you.
It's my pleasure.
It's the best to make people happy
if they can rely on us.
Mr. Kurosawa wants to cherish the oak, which is a limited resource,
so he puts a lot of effort into repairing it.
This bark was brought in.
The surface is damaged.
The bark is damaged.
He puts a lot of effort into repairing it.
He re-bakes the damaged surface.
By adding a burnt color, the dirt will not stand out.
Finally, he replaces the bark with a new one.
Mr. Kurosawa has reborn the oak.
Will he be able to regain the comfort of sitting?
It's in the hands of the repairman.
Once the material is decided,
he makes a frame to round the straight bark.
He bakes it with a burner.
By burning the fibers on both sides,
the bark's repulsive power is taken away and the shape is fixed.
The power to return to its original state is strong,
so he bends it to make it smaller than the mold.
And the repairman got a tool called a chisel.
He repeats the adjustment to make a frame without distortion.
Finally, he cuts off the ends of both and fixes them.
He leaves the thickness of the blade to finish.
The blade is cut off.
The repairman's hand has revived the warmth of the old tower.
The hole-in-the-wall frame
has been reborn with the same pattern.
The beauty and strength of the tower have been revived.
The place where the crack was in
has been reinforced by winding the tower,
so it doesn't feel strange to the original design.
The finished chair has been delivered to the client.
Wow!
It's like a new product!
Wow!
I wonder how many years it will last.
I'm sure it will last a long time.
Wow!
It's very sturdy.
