Thay Mâm Quay Toa Cho ĐẠI GIA Máy Xúc Ninh Bình Ở ẨN- Chả Có Gì Bằng Anh Em Cùng Quê Cùng Xóm

Xuan Manh Excavator
86 followers
Thay Mâm Quay Toa Cho ĐẠI GIA Máy Xúc Ninh Bình Ở ẨN- Chả Có Gì Bằng Anh Em Cùng Quê Cùng Xóm
Xem thêm :
#XuanManhVlogs #mamquaytoa #jcbvideo
--------------------------------
© Bản quyền thuộc về Xuân Mạnh Vlogs
© Copyright by Xuân Mạnh Vlogs ☞ Do not Reup
Cam Yes Yes, the
new brother is still different, right? Hey, I
need a boy, I need to try, right? Let's
try
[music]
Hello ladies and gentlemen,
Manh is currently in Ninh.
Binh is full of love and this is also
Manh's hometown. Today, Manh
is in Tam Diep Ninh Binh to
replace a new crank for the
SK 120-1 cobo working here. The
original condition was that the tray was
very heavy and now this mandarin's tray
is completely broken, so our boss
chose to replace the tray with a
new one. This boss is also his
brother and also a close relative. right next to his house,
guys. You know
that he is doing this job of repairing and
replacing new turntables, so he called him back
to replace a new one,
but he was told it was nothing. equal to
brothers from the same hometown and there's nothing like brothers
working close to home to support each other. And this
is a new spinning wheel that
our brothers brought down and are in the process of
installing the old wheel of this one on the trunk of the car.
Here, you can notice the old rim of
this one, the inner rim has been coaxed and drilled
out. This one, the old rim was
restored once, but the restoration was of
poor quality. Here, you can see
Look from afar, the pain is extremely severe. In
these cases, recovery is no longer possible,
guys. It can be recovered,
but it's not good to
use. It's not safe and not
guaranteed, so it's me. We have to replace it with a new one to
make it work better and make it
more secure. And here is a
rotary tray being installed by our brothers.
A new one with the
old one will be fine. Our brother
took it apart the day before. Today,
after waiting for a while for the
new wheel to arrive, we are now installing the
new wheel. [Applause]
This axle of mine is still beautiful, not the
whole wheel. I told my ex
that the
X is still intact and I'm already bored with it, so I'll [ __ ] you
secretly and make you sit fat, meaning it's broken and I'll let
you break it too, right
? It's already been
determined. If it's already been
replaced, it's already ruined for you. In
addition to the fact that
he's still fighting instead, he's also helping
out. He's such a great brother.
Oh my god. The first one made it, I
bit it all. The first one bit the
base. In general, I made a long rod. Withered, it
all stuck. That's right. The other day, I made
some Ran mas like b7. It's good how
long the rod needs to be to make it, it needs to be long. Most of them are
sticky, sticky, sticky, but it depends on
how you do it. For example, if
you know how to do it, it will take a
long time, but if you don't know how to do it,
it will be faster.
And this is a new
Although that page is not a high-end machine
, it is very clean and well cared for.
This is how much money it prints
for you right
now. This machine is not called an excavator, it's called a
yearly money printer. Do you have a couple of
billions? You only have 200 to borrow and deposit it in the
bank,
right? This is an exchange for a
pineapple coo
SK
120. I've been
taking it out to shoot for mom. The paint is all over again
now that I don't make sea water anymore,
there's no need. No paint. Still have to paint
because it's not my housework,
any color is fine, but I
think it's beautiful, right? After you shot it, you
shot all the paint, all the yellow paint like this one.
You usually paint all the bags. Money like
you or Son is familiar with machines, both patching and patching the punctured
areas, which
means shooting sand wherever it's damaged and
they'll patch it up for you. It'll all be
around 14 million 14 million Son The
whole thing is so cheap. Without
my brother doing it for me, if it costs 14
million and shoots all the paint, this one must be cheap.
Cin g lifts from under the chair and releases it from under the chain. The paint is all
gone. He shoots it with sand.
It's clean, the steel is clean like this. But
if that part is needed, then
it's still right for her, right? That means it can make good paint and
seal if only the company can do it. The
paint is
beautiful down there. There's a younger brother who did it first and the
other one also painted it and
said he put water in the back of the pipe and killed the stroller yes yes Oh
so the last time I took the tray back it was faulty the last time I
made the tray and replaced it and it was
misaligned. No the tray is what we know.
I didn't find out that the tray was the tray. It's
just that it's broken. I knew it was broken. I
didn't know it when I bought it. But I
mean, in the past, why did you say that comparing the tray to say the tray is afraid of getting sick?
Yes, we got the tray first. of the
N1 N1 so he brought it back and this hole is
not the same. Do you understand? For example, now
here is its screw step. Here it is.
Now it's screwed again, it's lying down. Ca
n't you turn it and screw it again? It's askew again
like this. That means now it's like if
it's askew and I can't get in, right? Then
after that, [ __ ] me and wash it all off.
Finish wrapping the ball to pretend the baby is tired. [ __ ] me and
wash it again, Thao. I told you that, right? If
I didn't tell you, I would be the one. If I'm lucky, I'll
have to go back and waste my time, right? I'll have to
wait again. Oh my gosh, the three servants are
three beautiful girls in the middle of a The
pineapple hill here is completed and paid in kind, one
is to take the land, two is to take the concrete, three is to take the
pineapple, is to take people, there's a lot of people, wow, look at the
lady in blue, she looks like a
war horse, people say,
can you eat it? Everyone can't find
it, 15 million is coming and calling me to come
down. Slowly, this one will fall down.
Now, as usual, we will
proceed to lower the engine so that the
gear part of a V-car matches. With
the gear of the tray, this tray
has been lubricated by our brothers. We put all the grease
in here.
Here it goes down. Little
goes down. Little goes up. Drum
up. This one goes
down quickly. Slowly stop, turn the teeth,
turn the teeth. go back and fake it, what's the fake back? Get down, don't
turn around, come back, go down,
go down slowly. This one's going down
very fast. This one's going to jerk. Let's go. The
weather is Ninh Binh to welcome
us. Because of the blinding weather,
guys. Now it's the so-
called drizzly months and the weather is
cold, so it's just gloomy and gloomy like
this, but it doesn't rain. Here, the
roads are being built. These are the
pineapple fields on the right. The pineapples
are being destroyed to make pineapple sugar.
This season, they haven't been
eaten yet. It seems like it's starting to
drizzle again. Isn't that unexpected?
Later I pushed it back. There was a bit of
drizzle on the plane and I had to do it
quickly to make it
neat and prevent the
glass from slipping.
Oh, any of you who need to dig ponds, dig ditches,
etc., can contact me
immediately. This one has all the
long rods and short rods. Just
look at this one and know this one. Now there's
40 meters left. It's
41. I saw a stranger's trigger
calling.
And this is a new turntable.
Completely installed by our brothers
for C be C in Tam Diep Binh. Right now, the
owner is testing to
experience whether the new wheel is different
from the old one. Not sure it is a
new wheel. it will always be different from the
original tray that was shaking and then you guys
[music] it
spins smoothly
[music]
a new tray has been installed and
we have finished installing it. What about the The old tray
will be returned to the owner
so that the owner can use it for any purpose.
This one here is doing
jobs such as shoveling soil to build roads and build buildings.
It's about attaching the short rod,
it's also attaching the long rod,
guys. It's not like just attaching the
short rod. Now, let's hoist that
part of the tray
down and
rotate. Is it quiet? The
new brother is still different, right? This one
needs to be tested. I need to try it. Is there a need to try it?
Let's just try it. The part of the butt is down, please put down the ball pin. Just
like that, a new rotating butt
has been replaced by our brothers.
Complete it for her. Anyone who
needs to restore the turntable to replace the
new turntable, please contact my 9-year-old brother.
Thank you for watching the video. Hello again and see
you soon. the
[music]
uncle
