世界十大農用機械,咖啡收割機,甘蔗收割機,打包摘棉機,馬鈴薯收割機,甜菜收割機,甜菜清潔裝載機(GRIMME VENTOR 4150/RoGator RG1300/John Deere CP690/)

第一重工
20粉絲
59 次觀看·2024年1月13日
No.1 RoGator RG1300
is
a self-propelled boom sprayer developed by Butler Machinery in the United States. It is
equipped with an 8.4-liter AGCO 6-cylinder diesel engine. The
maximum power is 276 kilowatts. The
working weight is 14.47 tons. The
maximum speed is 58 kilometers per hour.
It is used for
spraying liquid preparations such as various pesticides, fertilizers and plant production regulators in large areas. It
has high working efficiency and
good spray quality. The
spray volume is evenly distributed.
The height of the spray system can be finely adjusted according to the growth of high-
rod crops, including the lifting,
unfolding and folding of the boom,
all of which can be set in the cab
through the dashboard.
No.2 John Deere 9620RX
is a tracked agricultural tractor developed by John Deere in the United States.
It weighs 25.17 tons and is
powered by a 14.9-liter 6-cylinder diesel engine with a
maximum power of 462 kW.
Fuel tank capacity is 1514 liters.
Wheelbase is 4.15 meters.
It can run continuously in the maximum torque range
and maintain the lowest fuel consumption,
even if the high torque works at low speed for a long time,
it can ensure that all components including the engine
transmission and hydraulic system
work stably under the maximum load.
Reduce the damage to the soil during operation
and can work stably on different terrains.
No.3 CLAAS JAGUAR 900
of the Jaguar is a
self-propelled silage harvester developed by German Keller,
among which the
three high-power models 990, 980 and 970
are equipped with MAN. 12-cylinder engine with a
maximum power of 680 kW and a
feeding performance of up to 400 tons per hour.
The improved cutter rotor
also has a stable cutting quality.
A total of 42 moving knives are equipped with a
cutting frequency of 25,200 times per minute.
The engine can provide 3.5 mm under full load.
Short cutting lengths up to 12.5 mm
for precise
shredding All header drives
are integrated into the main drive system The
header drives, feed drives,
rotor accelerators and kernel breakers are
able to respond to speed fluctuations in the same way
for cutting lengths Maintain stability.
Its automatic optimization system
also reduces fuel consumption while increasing efficiency.
Maintains set revs and adjusts engine power and travel speed according to harvest weight.
No.4 Jacto K 3500
The first generation
of self-propelled multifunctional coffee harvester developed for working in the plantation
was launched in 2015. The
model on sale is equipped with a
Cummins 4-cylinder diesel engine with a
maximum power of 100 kW and a
maximum driving speed of 15 kilometers
per hour. The harvesting speed is 2.5 per hour
It is equipped with 1296 coffee beans. The
peeling efficiency is as high as 97%. The
minimum harvesting plant height is 0.26 meters.
In addition to the harvesting system,
it can also be connected to the spraying
system. Various open parts such as the trimming system are fully The annual operation
performs harvesting, spraying and trimming operations.
No.5 Case IH Austoft 8800
is a crawler-type sugarcane harvester developed by Case Company in the United States. It is
equipped with a
9.0-liter 6-cylinder turbocharged engine jointly developed by Case and Fiat. It has a
maximum power of 260 kW.
It can complete the whole process from cutting tip,
cane peeling and cutting
to cleaning and collection in the field.
Its bottom knife adopts a detachable
5-blade double-cutter design, and the
hydraulic drive
can rotate in the opposite direction
. The side knife with 8 triangular blade structure
can effectively To prevent the adjacent sugarcane rhizomes from being brought out,
and to ensure the smooth supply of materials,
the cane stalks after cutting the tips are cut off
by the cane cutter, and then peeled by the defoliator, and then sent to the cane box and the
cane leaves to be scattered in the field.
During this process, the
system will also automatically Control the height of the cutterhead to
reduce the cutting loss of sugarcane stems.
No.6 John Deere CP690
is a self-propelled baler and cotton picker developed by John Deere. It is equipped with a 13.5-liter 6-cylinder turbocharged engine with a
maximum power of 418 kW.
It also has an additional 24 that can be electronically controlled.
The explosive power of kilowatts can ensure sufficient power
even in difficult operating conditions. The
maximum speed of field picking is 8.5 kilometers per hour. The maximum speed of
road travel is 27.4 kilometers per hour. The
maximum diameter of cotton bales can reach 2.39 meters and the
maximum width is
2.44 meters.
Completed 60 acres of cotton harvesting in one hour under field conditions. It
became the most efficient cotton picker in the world at that time.
The cab is
also equipped with a newly designed digital corner post display,
automatic shift button and multi-function control lever, which
can greatly improve the operation efficiency.
No.7 Fendt IDEAL 10T
is a grain combine harvester developed by AGCO's German Fendt. It is
equipped with a MAN 16.2-liter
6-cylinder turbocharged engine with a
maximum power of 581 kW.
It adopts advanced electronically controlled high-pressure common rail technology and is
mainly used for wheat crops. After the harvesting is
equipped with corresponding functional parts,
it can also harvest crops such as soybeans and corn.
In addition, the rear-wheel drive device can be selected
to further improve
the passing ability of the harvester in the muddy land. The
ideal 10T can complete cutting, threshing,
separation and cleaning in the field at one time.
Its shear flow threshing drum
and plate teeth longitudinal axial flow separation drum structure
effectively enhances the separation and separation performance,
reduces the crushing rate of grains, and
fundamentally solves the problems of incomplete
separation, large separation loss and low efficiency.
No.8 HOLMER Terra Dos T4
It is a self-propelled beet harvester developed by Homer, Germany.
The basic model is equipped with a 15.6-liter Mercedes 6-cylinder engine with a
maximum power of 460 kilowatts. The
unique cutting technology of the T4 series
can ensure that there is no blade residue on the top of the beet during the cutting process.
It is equipped with a 30 cubic meter silo
and a helical roller that can rotate in a reverse direction to
ensure even distribution of the beets and
effectively prevent the beets
from accumulating somewhere in the silo.
At the same time, the free rotating disperser in the middle of the silo
will further protect the
beet from breakage and waste.
Its unloading belt can throw the
beet to the The silo can be emptied in 40 seconds
when the vertical and horizontal emptying tracks are fully opened in the accompanying transport
vehicle or directly stacked at the designated location.
No.9 HOLMER Terra Felis
The 7.7-liter Mercedes 6-cylinder twin-turbo engine has a maximum power of 280 kW.
Its loading distance is up to 15 meters. The
loading height exceeds 6 meters.
There are 18
low-wear rollers that can automatically rotate in both directions.
With the help of two hydraulic turntables, it
can cover 332 The high loading angle
can effectively deal with the problems such as the loading position is difficult to access, the
loading distance is too large, and the
loading height is inconsistent.
Flexibly adapt to various environments.
If the beet piles have a lot of debris, a
larger pickup angle can be set to provide more space
for the removed dirt
and weeds
to effectively prevent the pickup table from idling.
No.10 GRIMME VENTOR 4150
is a self-propelled developed by Glimer, Germany
. The potato harvester is
equipped with a Mercedes 6-cylinder diesel engine with a
maximum power of 390 kW and a
total length of 15 meters. The
standard empty weight is 30 tons. The
hopper capacity is 15 tons.
The width is reduced to 3.5 meters for road transport.
Its furrow depth limiting device.
During the excavation operation, the
lifting unit is guided by the depth limiting wheel that travels in the furrow
so that the potato ridge
is lifted into the machine without any pressure
and then immediately Distributed on the screen
This model can also be optionally equipped with a seedling killing system for the ability
to work
in harvesting conditions with a large number of long and tough potato seedlings
