Holi! Me hace muy feliz que estés aquí un video más. Hoy te traigo un diseño de UÑAS MEDIANAS en BLANCO Y ROJO con un EFECTO ESPEJO y decoraciones de EFECTO SAND / SUETER Espero que te haya gustado el video y te haya sido de ayuda si no sabías cómo lograr éste tipo de diseños en las uñas, o si aún no lo conocías :) No olvides dejar tu like y un comentario haciéndome saber si te gustó el video :) tengo mucho contenido así que no olvides tampoco suscribirte y activar la campanita de notificaciones (Todo es GRATIS) para que no te pierdas de nada c: Saludos y éxito! Te quiero mucho!
Hello, how are you, welcome once again to
another video, I am Jessica Alba, I am
very glad that you are here and
today I bring you another Christmas set.
Beautiful in red colors but this
time Only with a few small touches
of mirror effect so let's
start by doing all the nails
applying acrylic cover or nud all
of them are going to be the same So I'm going to
be summarizing this part so as not to
make the video not so long now Taking
advantage of the fact that I'm doing the
acrylic application I want
to recommend that so that you don't
have detachments or this situation
where the acrylic is going to touch the skin and
this can trigger either an
allergy or a detachment. It is La
Perlita that goes in the cuticle area, do not
put it so close Okay, Put it a couple of
millimeters down and it is not necessary
for it to go to touch the skin but only
with the tip of the brush you will be
taking it little by little to that area Remember
that you have to get closer but
we will never ever be touching the skin also
as another recommendation right now in the
winter Christmas seasons it
is getting very cold this
too It can cause your acrylic to
become a little more watery. You can
get acrylics that are
quick-drying or you can also do this in a
super homemade way. You can add a couple of
drops. Don't let the
jet of acetone fall on it either. You have to put a
couple of drops on it. drops of pure acetone to your
monomer And this will help you make
drying a little more normal in these
cold seasons now moving on to
filing once our acrylic
is completely dry the time it will
have to take we will be By filing
our nails in an enveloping way,
remember to do it this way so that
your nails are not going to end up with some
sharp edges or some chips there. Don't
forget that if you are going to apply some
polish or a top, it will be done
even much more It is obvious if there is
any imperfection left from the moment you
are filing. Then
always very carefully and in an
enveloping way. Now once you have
finished filing the
nails perfectly, we will first be passing
our brush or our obledo and
then with our nail cleaner.
brand of your preference we will be
removing the remains of acrylic and in the
first design that we are doing right
now, first I was placing a
layer of Top Finish or top glass or top
finisher of any name that you
know of these, this layer of At the
top I was drying it for 30 seconds in
the lamp, I'm not putting it on
camera so the video won't be
so long either, so once
it's completely dry I'll
be making these small strokes
like snow falling or running off
the Part of the cuticle area I am
using a white painting gel
but if you do not have a white painting gel,
no. Don't worry,
the semi-permanent polish can also work for you.
Now be very careful
because with this polish I am not curing these strokes
yet. Let's
leave it cool, I'm also going to be
adding a small snowflake stroke,
it's very easy to do,
we're just going to need the pointer
and the Liner brush. Basically, we're going to
be making lines as if
we were making an asterisk and in
each line we're going to be adding
dots we will also be playing
with the size of the dots you are going to
decide if you want all the
dots to be big or small
but to give it a little more
style you can insert this
size and now yes for this reason is that
I left the enamel completely fresh
because I was going to be spraying a little bit
of transparent acrylic to
give it a different finish and a view and
also a
relief and moving on to the next design
here first I am going to be placing two
layers of black semi-permanent enamel
with Be very careful not to touch the skin,
but in case you do it
like me, you can take a brush with your
cleanser, wet it a little, and then you
only clean that area where you touched the
skin. This is part of cleaning any
excess, we have to do it before
starting to cure. because if not it will no longer be of
any use and now after having
applied the two coats of polish we will
be protecting with top coat we will not
be using top finish it is top
coat Okay now I will be taking a
little bit of my mirror effect red color
with my applicator also works if
you want to do it with a silicone brush or
with a brush but in my opinion with
this little sponge ador it looks quite
good. So we are going to be rubbing it
on our layer of Top Coat that
we have dried in the
lamp and After we have shaken off
any excess of the mirror effect pigment
we are going to be protecting once
again with the top coat. I want you to pay close
attention to how this shine changes. It becomes
even more intense once it is
protected with the top coat. It is important
that you do not miss it. you're going to forget to protect it
because otherwise when you go to
wash your hands all this application is
going to fall off and it's not going to last at all
so don't forget
to protect it very well with a top or also
a recommendation a little advice out there
If you want it to last even much
longer, any effect in this case would be
the mirror effect. I suggest you protect it
with a very, very light layer of
construction gel. But well, let's move on
now with the design. Once
my top has dried, I'm going to I'm making
some small strokes with my Liner this
time I'm not going to be making any
candy designs here because I feel like
they're always very common. So
let's vary it a little bit. I'm
making this semi-spiral shape that
connects in the cuticle area with a
On the side I will also be doing it
at the bottom as well. Pay close
attention because I am not drying these strokes,
I am leaving them
cool so that later I
can do my
sugar effect, the sugar effect is
basically the same as the Sand effect
or The sweater effect requires that the
glaze where you are going to place it is
completely
fresh. I will be spraying my glitter right now. I
shake off the excess a little and
then I cure it for 30 seconds. I shake it
and now it would be
ready.
Now we are going to move on to the next
design here. I'm going to be doing a
French but I'm going to be
doing the French with a red mirror effect in the
same way as we did in the
previous nail I need to first make the line
where I want the mirror effect with
black. In the same way here you need to
give it two passes of the polish but I
'm not going to put them on so that it doesn't get so
long, so the same situation:
we put the polish in two layers and both
layers have to be thin because
otherwise it may
swell or wrinkle. So always
always thin layers Okay We
do the same process again but only
in this area of the French, don't worry
if it gets a little stained because we are going
to clean it later, don't
worry, and I will also
only be protecting where I put my
mirror effect here. I need you to put
a lot Pay attention when
protecting this french with a
mirror effect because with a little bit of effort You may spend
more time with the top in those areas where it was
half stained and it will be difficult
to remove it even if you use the cleaner
and the gauze Okay then, be very
careful when make that area of the
strokes in the same way we are going to
dry it for 30 seconds in the lamp and I am going to
be repeating the snowflake design
but this time I am going to focus it on
the part of the Frenchman's smile. In the
same way I am going to I will be doing the
sugar effect only in this drawing of the
flake. I repeat the process once I have
finished spraying. I let the glitter
dry and shake and it would be ready. Now I will
be adding a little bit of
crystal decorations so that it doesn't
look so empty. and I am going to be
adding a few crystals and
decorations along with some pellets
But now I am going to put these bales in
silver. I was using
construction gel to stick the decorations
and the crystals But if you want to
place them with resin or any
other way Go ahead, as I always say,
for me, construction gel is the
simplest, easiest and
safest way to stick your decorations and if you are
interested in knowing how to stick the
decorations without any type of
detachment, I have a free class
that I am leaving you right now in the
upper right corner of the screen
so you can go and check it Or I
will also be leaving it in the
information box of this video so that you can go
and check it more calmly I have a
lot of free classes for you
waiting for you So go I'm going to check out my channel
too so you can go see them But
well moving on to the last design here I'm going to
be doing the same french in
white But this time I'm not going to
be adding any glitter if it's going to
be the ef
sweater this would be the final result
I loved it, leave me in the
comments what you thought of it and if you
really liked this video and this design.
Leave me your thumbs up, it's completely
free and you're going to help me a lot. I
invite you to subscribe to
my channel, it's also free and activate the
notification bell so you don't
miss any content leave me a
comment how did you think share
this video on all your social networks
send it to the girl who does your
nails so she can see these
beautiful designs and well I'll send you a kiss
See you in the next video
bye