Lecture 45

IIT Kanpur July 201
20 followers
Dec 4, 2023
[Music]
[Music]
welcome back so this was the last slide
we discussed about the offset of stream
we identified lung
Gangadhar valley fault and this was one
of the most prominent signature of
course we also got more but this was
very prominent on the satellite image as
well as in the field so we mapped us and
as I told that this mapping we did with
the total station and that so these are
all points which we took and the offset
which was measured with that was around
10 meters now coming to the other
location were here that is the tongue
grote area again a very sharp even or if
you can see this on Google Earth you
will be able to see the default trace on
the recent images also this is the trace
okay it looks like an and somebody has
taken the knife and just cut the surface
okay so very straight and then again the
offset you can see here which goes we
have the fall trends over here again so
this linear feature is because of the
movement along the cognitive Valley
fault and as I explained that this side
is up in some locations but here in this
portion the side is up this is down
so whatever the drainage which is coming
from the the hill slope so for example
the strain gauges which are coming here
are offset it here and then flows like
that but we see a sort of an ending in
this region
so a marshy environment has developed in
this region because of the lead the the
rivers which are blocked getting blocked
along this one so as I already explained
but I will just put it again so you have
a slope here and the the drainages which
are coming and getting blocked over here
so this is the close up
it's whatever shrink here so very sharp
feature on the surface and again after
having a very detailed mapping of this
portion as well as the other other part
that what is the the basic requirement
that you prepare a detailed geomorphic
map well you prepare the chronology of
the surfaces that means the older
surface and younger surfaces all you
will mark and as well as you will mark
the the features like offset of stream
so these are the streams which are
getting offset here now I mean then and
this portion is a waterlogged portion so
the in the the 2d view you won't be able
to differentiate between which surfaces
are higher and which surfaces lower but
in 3d as we were talking about the in a
graph you'll be able to clearly mark and
the older surface and the younger
surface but let me tell you here that we
were able to pick up that the older
surface as well as the younger surfaces
where displaced along this fault so this
is the fault race so this side is up and
this is down here
so there were a lot of arguments when we
started mapping this fault that whether
this this is a default or not and
because the false Cup which usually we
could have seen in the the deformation
like what we are having the human limb
in region so for example if you are
having in the deformation where your
Sigma one is in this direction then you
will bound to see the false cap
something that can and because this is
like overriding emollient side okay so
you have this is your Eurasian Plate
coming up for that material and this is
your Indian plate so most of the
defaults which we we expect will be not
dipping so so we expected that as we see
the different Fault topography and the
fault ribs mostly like for example at
safety another faults and like NBT and
all that okay they are all South waiting
facing scarps we were expecting but here
what we found was the scope was not
facing so there were discussions in the
field that how this can be explained but
of course after having detailed
discussion and then what we identified
in the field the the topography and the
signatures reserved in the sediments as
well as along the fault
we agreed okay that this is default
topography so this we did in 2010 long
back almost ten years now and this is
the false coverage so this side is your
South and this is your north and Fault
runs somewhere over here now we also did
along with this with the help of an
igloo we mark the terrorists risers that
is the boundary of the terraces
and we tried a simple method that what
we we did was we cut the the whole image
along default and tried to match the
different streams and that also helped
that how many times this Walt has moved
in at least a preliminary information
you can generate for example this is the
maximum displacement here where as you
see here is the minimum one so that can
also help in identifying but that more
than one event has been recorded or has
occurred along this one okay so for
example if you have you know the screens
with larger displacement and with lesser
displacement as compared to one another
okay so that indicates that that at
least for example if you take the fault
runs here and these are the streams
which are offset it so this is showing
comparatively less than this one where
is this one is showing maximum
displacement if you compare with this
two so this indicates that this has
taken up the youngest displacement
whereas this one is showing the all
cumulative and this may be because of
the two events or so so this is what we
did we try to cut the the image and try
to match the streams here again you can
do that if you are able to pick up a
very distinct region along your fault
and that portion you can do for this
exercise so what we found was that when
we matched this one okay this stream
which as I was showing that this was
showing it at less displacement so when
we match this one still we were able to
leave some some displacement is still
left out we were not able to match this
two line and even this was not been
matched so
it shows that this where this indicates
again in the second part we did again so
we have like this is match matching but
this is still not matched okay so we
have more than two events here and the
amount of displacement initially what we
did was forty centimeters and then
another one is around since 70 meters if
we take in to two times if we displace
this so this type of exercise one can do
and then again the field mapping was
important so we did the topographic
mapping cross the scarf which has been
shown here so this is the fall scope
which has been which you can see here
and this portion was the portion which
was I was talking about the water lock
so this is your another site which is
down and this is your southern side will
you suffer so the slope is in this
direction so whatever the water is
coming here is getting locked because of
that and then you have the bonding
condition so the fault here strikes
north-northwest also test with the North
facing Falls cup displacing again
quaternary alluvial deposits or raloo
you'll find deposits and it has resulted
into the deformation of marshy condition
and we also picked up so initial like
offset so initially it is extremely
important to walk through or walk along
the default trace and identify prominent
locations so this is what you can see
the students are standing in line here
and the offset is somewhere over here
like that okay so it goes like that and
then and then further so this is the the
offset of the stream and fault runs over
here then what we did force the to
confirm that this fault has displaced
the end deposits of course we were quite
confident looking at the false cap as
well as the two more features but it was
as a part of the methodology what we
have discussed in the initial lectures
that we normally do and follow
religiously followed
steps so we did GPR and this is what the
profile showed us okay so this is an
again the south to north profile we took
and close of this will be expected that
default will lie we found this one okay
so we we saw a very typical flower
structure as we have been talking in the
in the previous lectures about the the
flower structure and we got this as an
positive flower structure so as I told
that the the primary requirement will be
your mapping detail mapping of the
geomorphic features okay so with the
help of car to set data and that also in
the if you are viewing in 3d that is
your inner glyph you can use this
digital data available on your screen
you can enlarge the areas and trace
those those features okay so if you can
clear if you see this patch here this
cluster then you will try you will
understand that how precisely the
terraces are been marked where you can
see the T 1 T 1 here and and so on and
here also you will be finding all the
terraces here so this is this is must
and you should do this initial mapping
so that you understand that the the
characteristic of the fault one the
second is that what geomorphology has to
tell you and also if you see here these
are all offset of streams here we can
begin Marquis et okay so this was been
done using anaglyph so in this figure
and this is in gray and gray scale we
prepared but this if you try and
initially be prepared and in the colored
okay and that also helped us in
differentiating so you can see the
boundaries here of the offset of streams
also as well as the terrorist boundaries
that was extremely important for us to
map
and this location also you can see the
offset of streams here and this portion
it was from the the area where I was
showing in the further north west where
the one side rose up and neither side
was down at the side was down and the
side was up so this is typical of the
the rotation of the blocks
one will observe in strike-slip
environment now coming to this one which
was again an important one because we we
were able to find quite young
displacement or here in terms of the
stream offset as well as in terms of
this carp here so the previous one if
you remember this carp was at almost
around 1.2 meter or 1 point 4 meter if
you quickly look at it okay then this
was this curve hi talking it was almost
like 1.5 meters so we looked at the
youngest scarp in the area and we did
detail mapping there also and this was
the site which we fixed that okay fine
this is the best site to go for
trenching so this two sites had been
identified pt.1 and pt.2 this is the
based on the revelation we have given
but here trench 1 and trans 2 to confirm
the the displacement in the sediments as
well as the to identify the Palio
seismic events so this again at this
station with it very detailed mapping
using real name cannon medics and PPK
survey post-processing kinetics and then
we have we also the GPR in the field
okay so we we did this to generate a
dense contour and maximum number of
points in this area to generate digital
elevation model so the scarp height if
you see here is very very low almost
hardly
half a meter to maximum in some places
it will go up to one meter and then we
also saw a terrorist riser through this
the boundary of the terrace where people
have constructed thee in the water drain
and you can see the offset here okay so
this offset was very prominent and then
we thought that we will trench somewhere
over here so these are all not facing
scar boundaries we saw and the detailed
mapping with the total station and RTK
helped us in locating the the fault race
and the Redis riser offset of the
terrace riser here so this were the two
locations which we picked up of course
that was based on the GPR also witted on
both the locations as well as the
undisturbed site because that is you
need to minimize the in terms of the
erosion as well as the modification done
by people local people there you need to
avoid that so they we considered this
two sites where the potential sites to
which can give us the best results
of course locating the site in the plane
which has been shown here this is PT 2
was difficult but when we connected the
the land landforms displaced landforms
between these two points and one side
here then we were able to at least fix
that probably the fault might be running
here
what might jumped aside but this was the
the ideal site we thought of and then we
did GPR also and finally we were
successful in identifying the Palouse
aging site so this is the PT 1 trench
one which we dug across the in this very
low scarf and this side is not this is
this is not the site and this is out
here so this will be dick ok challenges
were there of course because we were
digging the trench on an alluvial fan
surface and also the the valley which
was
once covered by glaciers okay so the
huge folders you can see the the height
of the person here almost like one more
than 1.5 meter in diameter there also we
came across we we were very cautious
because we knew that the fault is
running somewhere here and with the help
of GPR we were very confident about that
I'll show the GPR profile also but of
course this is what initially we opened
the trench and cleaning we were doing so
these are my students who are working in
the trench where again if you see what
we discussed in the beginning we have
kept the material away from the trench
wall and the side 120 ID wall was been
kept completely vacant we did not put
the material on the side and the top was
been cleaned very properly as far as we
did not allow the this portion to be to
remain shabby
because this are all important context
which we will have to take into
consideration while mapping so this is
the GPR profile we had this is
uncollected GPR profile but this is with
the topographic Corrections and again
here we were able to pick up a very
beautiful flat structure unfortunately
we were not able to code so deep but
here if you see this one the depth is
almost like more than 6 7 meters and the
GPR profile so we planned that okay fine
we will open the trench here and as we
have been discussing right from the
beginning that the ideal opening of the
trench would be that if you are opening
the the the false cap and that is
deformed units and under formed units
and another trenching part which we can
you know the pattern which we can do
here is we usually talk about the 3d
trenching ok so I'll try to talk about
that part in my next lecture we were
unfortunately we were not able to
perform the 3d trenching
and that trenching is important for
example if you if you are having default
like that okay and then you have so this
is your scarf and you find some sort of
an offset for example you have an offset
where you see the channel has moved like
that okay so you have an moment here for
example this I'm just putting left
lateral but you can put it how right
lateral also so there is no harm in that
so then if you have this one then if
this was an old feature okay then you
will be able to see the two piercing
point in the trenches so what we plan is
we usually do trenching parallel to this
and parallel to this Cup on the this is
of this up thrown block and the down
through clock and as well as we also
open the trenches across this one so
these are the are the techniques which
one can use to identify the offset but
what we did was because we were not
having enough and we will not been
allowed actually to dig here because the
local people they say that the farmland
will be destroyed completely so they did
not allow so this the stream for example
we are taking here and these are the
trench boundaries okay so one can do
this 3d trenching along with the the
usual trenching which has been done
across the false garb in normal and and
thrust and thrust faulting environment
so what we did was that we did GPR
profile here and we were able to fix up
some offset in that so I'll try to give
a lecture on that if possible in the
next class okay so this what we did I'll
just remove this because this is not
going should not stay here so
so this helped us in fixing the
trenching site very precisely the Jeep
here which were dead okay now this is
the log final dog which has been shown
here and then and the crit which you
should if we do is 1 by 1 meter thread
is there and since this portion we knew
that this is the default run somewhere
here so we we we mapped this intensely
and this portion also the both the walls
are been shown here so the
interpretation again is like which
includes the in the understanding of
sedimentology where we were able to fix
up that the soil horizon series so this
these are the different soil units or
the layers and also as well as we also
took into consideration the grain size
okay so for example this blackish layer
is immediately you will be able to tell
talk about that this or tell that this
is Yuma's rich layer so unit F is over
here the brownish black medium fine sand
and this we interpreted that this was
deposited or the formation of this soil
was because of the blocking of and the
the area so the off of the the water and
this in the result identity because of
the marshy land and so if we look at the
detail here then you will be me you will
be able to pick up that the offset of
the of the layers okay one is over here
which is marked at its point so this all
there's like your your having even
including this because this side if you
take then we have the layers from
starting from AP and going up to G your
K if you take okay ABCDEF th and then so
on but the important part is that
cross-cutting relationship this ends
here that means the the event the
marks the event one is over here another
is here and third is over here again so
this marks that this one for example if
you take this one then then this fault
along the displacement along this fault
strand took place after C and before B
and similarly along this strand then you
have this is after and B and before E so
this marks the capping units okay so
this with it and based on they have the
ages which we have like that was started
talking about the the unit F this we
have marked as developed during the
bonding condition so we have the ages
here now based on the ages you can
bracket as we have discussed earlier
also that you can take the maximum of
this age and the minimum of this one
then you will be able to bracket the
events here okay so that what we did and
based on that this is what we
interpreted here so this shows the
adding the ages here and the edges here
also P so this is the close up of that
of your this wall this is yours the west
west wall and another one was the east
wall which I was showing so the fault
runs over here again if you just again
I'll move that it's right here
so default you can see this fault comes
here so in in this zone what we see
where we see the flower structure we
will be able to see this isn't typically
you will be able to come across in the
strikes the faulting environment that we
see a branching out faults and almost
like they are not very much like what we
see in the thrust faulting but they are
there and this portion will occupy or
will comprise the material of of the
older sedimentary layers okay and that
what we see here so if you see in the
sketch here then you will find that this
the the portion of G has also been
dragged up and then you have some
material which is coming here and and
even this each one has been seen here so
that what is typical of this strike-slip
environment so you will have the sharing
of the material or shared material
shared material getting into the default
zone so this was the interpretation here
so we have like two fault strengths
major one f1 and f2 and then if F one
goes here and then and you are having
insubordinate faults here of F 1 F 1 e
and F 1 B and similarly we have another
one that is f2 and we having subordinate
f1 f2 a + f2 b so another trench which i
I was talking about we did here but
before that again we we did GPR
profiling and we were able to pick up
very similar on displacement floor
structure we well we did not do
topographic correction here because this
area was completely flat modified okay
so we did not do any topographic
correction here so we planned that ok
fine let us open up the trench here
after GPR and all that and this was over
trench so we found the Jeep in the
deformation zone here and again very
similar layer which we were talking
about which was you must rich developed
due to ponding condition so you can see
here and this is the the interpretations
The Fault runs here the traces and the
strands here and then because as we were
talking about that this the default of
course a strike-slip but the overall
deformation is compression so we also
see some common a bleak motion that has
resulted into the deformation of this
folding here so we as I discussed that
we did two trenches and we already I've
shown you the PT 1 trench and this is
your PT 2 trench now with this
information and which we were discussing
that the cause cross-cutting
relationship between the different
little units after preparing the
detailed sketch of this
and in and considering the ages which we
got from different units we should have
reconstructed the history of a
deformation that is here like events
along congra Valley fault so this is the
different stages which can be proposed
based on the cross-cutting relationship
so what we see in the stage one so we
had and then we had the which with the
unit F G and F a well present so event
one along that is your f1 fault fault
strand was responsible for ponding
condition that late to marshy
environment due to vertical displacement
of South sloping alluvial fan surface so
as I have I was explaining that the
regional slope is from north to south
and because defaulting resulted into the
and the displacement with the north
fittings facing scar so whatever these
streams which were flowing here we are
getting pounded along this curve so
ponding condition was developed because
of the defaulting on the alluvial fan
surface sloping towards South so the
next one we say that the event occurred
before so this is based on the ages of
which mean so now this these are the
this based on the the ages which we got
from different units and then further a
stage - that is your this one so just
remove this part here now we can say
this so stage two the event two
displaced unit G and F so you have G G
and F were displaced along the f1 strand
again we have the f1 stem deflected
a shallow channel because what we caught
was a channel which came up here on top
of this we see this channel up in the
Andes the exposed section of our trench
so we we infer that this channel used to
flow and this was deflected Alma due to
defaulting along F 1 so this deflected
shallow channel incised this shallow
channel incised unit F and deposited the
material here that is your channel will
deposit unit E and that is your stage to
further the over bank deposition is
evident by finite opposition that is
your event that is here units D and C so
this is the part of the stage 3 so after
this there wasn't like the deflection of
the channel and further that the
position of D and C even it then again
based on the edges we have marked that
the event to occurred between BC 980 850
and then coming to this stage for that
was the penultimate event that occurred
along again strand the same strand f1
and the subordinate strength f1 E and F
1 P after the deposition of unit C so
you have the after the deposition of
unit C and before the deposition of unit
B so based on the the ages which we
caught from unit C and B this has been
marked that the event 3 occurred around
80 1600 and then most recent earthquake
which we see is so this can be seen here
so this ends here
and then finally which has been kept and
then finally the last event that is most
recent event displaced unit B and kept
by unit a and that was with along the
second subordinate or we can say that
the the branching out fault here and
that is your another strength f2 and
subordinate Falls f2 a and f2 b
strengths displacing all units again
unit B and K with unit unit B as event
horizon so this was the all other units
were been displaced but B was the event
horizon so in this case and this C was
your event horizon in this case the B
was the event horizon and this event we
correlated or bracketed between AD 1700
and enduring so it it was bracketed
between this and could be correlated
with the 1905 congrat way so this
exercise can be done and precisely when
you have the ages and when you
understand the different cross-cutting
relationship between but between the
different units so taking into account
all the ages you can again do short of
what we call modeling with the with the
ox skill and based on that which so we
have put all the ages and also we are
putting the events probable events where
when and what ages we are bracketing
ages we get from this so this helped us
so this was done each modeling using ox
Kel version and this is available on net
free of cost you I need to just register
it and then you need to put the the
carbon is yes as well as you can also
put the OS alleges if you have so at
least three four events and that what we
have discussed in the previous one so
event one occurred between BC 909 and
2500 so this is what we have bracketed
the the first event then second event is
over here which is showing comparatively
large bracketing then event
three which is here okay that is between
750 and 1290 and then most recent event
was after 1620 and before 1940 so
probably this was around the speedier
hence we we correlated this with 1905
now what we also see here that the
recurrence is not same between the
events here this recurrence is quite
large here but we see a short road
occurrence between this two earthquakes
so what we suggested that probably the
overall deformation was taking place of
course it is taking place under
compression but we had some slip
partitioning which was responsible to
take up the slip between strikes the
fall and dips the fault and that was
because of the object convergence in
this region so this what we can infer
that how the making the mechanism of the
faulting where we have the this the
steeper fault coming up and we see the
development of the strike-slip faulting
so I'll stop here and we will continue
in literature
[Music]
[Music]
[Music]
