noc19-mg27 Lecture 13 - Consultative Questioning Strategy

IIT Kanpur July 201
20 followers
Dec 3, 2023
Hello, I am Jayanta Chatterjee from IIT Kanpur. We are discussing management of field sales.
This is our third week and we are focusing today on a topic that I mentioned in the closing
part of the last session, which is called spin selling. It is actually a very effective
way of using the question based selling, which is a foundation approach for consultative
selling that we have been discussing in this course right from the beginning. The approach
is a six step, it is part of the six step presentation plan that I offered to you in
the last session. So, as you remember we had approach, need discovery, presentation, negotiation,
close and servicing the sale. I discussed in detail about the presentation part in the
last session, but I am today going back to the need discovery, because if you remember
the two more complex types of sales presentation, which is need satisfaction and problem solution.
Those need a good understanding of the customer's need. So, most of the high value sales complex
product or system sales demand that you have deep understanding of the customer's needs,
because that is the only way you can structure your fab. That means you can create your presentation
on advantages and benefits through the features of your goods and services, if you understand
customer's needs very well. So, how do you discover customer needs? That is the point
of today's discussion.
The consultative sales process that we are highlighting in this whole course obviously
is very important, because it increases customer satisfaction, more sales are closed and it
is generally found to be more in tune with the 21st century, where the customers have
a more power and the information asymmetry has now is now in favor of the customer. The
customer has a lot more information about your products, your customer's products,
about the situation, about the industry, then you have to start with.
So therefore, the need discovery has to be a humble process. It has to start with the
assumption that the customer knows more and the customer is the king or the queen. And
depending on the sophistication of the product, the selling price that means higher price
needs higher investment in need finding, customer knowledge, product application, time available,
all of these are inputs to determine that how much time you spend on the initial part
of the sales process. So, higher the sophistication, higher the selling price, more is the requirement
of customer knowledge, more complex are the application situations of the product, you
need to spend more time on the inquiry part, on the questioning part, on the need finding
part and this discussion is about dimensions of need discovery.
So as you see on the left hand side, it shows the general flow, need discovery, ask appropriate
questions, listen and acknowledge customer responses and establish buying motive.
And this is by the way taken from Manning and the chapter on this need finding and please
do refer to the whole the book for a more detail understanding beyond what we are going
to discuss in today's session. So, need discovery leads to the selection of the solution which
needs to the need satisfaction presentation. So therefore, the need discovery is the fundamental
starting point for the need satisfaction type of sales presentation to succeed.
So now we come to what is known as spin selling, which says that there are four types of questions
which a sales person should use effectively in making a good sales process. So, there
are the S stands for situation, so there are situation questions, P stands for problem,
so there are problem questions, I stands for implication, so there are implication questions
and lastly N stands for need payoff, so there are need payoff questions. So, questions help
to clarify the exact dimension of the whole problem gives you detail insight. So, question
based selling is in a way another name of introducing the need satisfaction or the problem
solution type of sales presentation.
The types of questions are survey type of questions, these are for discovering basic
facts about the buyers problem and existing situation, usually it is used at the beginning
of the sale and normally the way you will express is can you please describe the problems
that you experience with respect to the say electrical contactors burning out in your
hoist application, I am just giving a real example.
This type of general survey or overall fact finding questions should lead to the next
level which is probing question. These are designed to uncover specific pain points,
clarify the circumstances and implications surrounding the customer problem and this
is used when you feel the need to obtain more specific information to fully understand.
So, continuing with our example about this contactors or actuators used in the electrical
circuit of a hoist or crane, they normally are prone to continuous servicing because
of the type of hoist or crane duty the contactor starters burn out quite quickly. So, they
need replacement on a regular basis, the contacts need to be replaced.
Now in the earlier types of design often the whole contactor used to burn out, so you needed
to replace the whole contactor. Some improvement in designs have come in and therefore that
has actually come because of these understanding through the spin method of finding specific,
so the customer's pain point was that replacing a whole contactor was very time consuming,
sometimes a whole starter caught fire, it was therefore a hazardous situation. All of
these led to solutions which are now more modular where a certain defective part or
contact can be quickly taken out and can be replaced and this modular approach to the
problem solving can be applied. Actually, this is a problem relating to an electrical
starter in a hoist or crane but this kind of modular approach can be applied to many
other types of problems. So, probing stage are often used to address a specific customer
specific situation. So, like are the logistics problems, suppose somebody is organizing a
large event and therefore for that exhibition or for that conference or for that large multi-day
seminar if you talk about logistics problem it is actually you are probing a very specific
area. Then you have the confirmation type of questions where actually what you have
understood through the probing about the specific nature of the problem you seek confirmation
so that you are on the same page with the customer. So, it is used throughout the sales
process to get this customer's feedback and confirmation that their perceptions match
your supposition, your hypothesis. That is why you therefore say this kind of statements.
So, you think the uncertainty associated with travel is affecting your performance. So,
this is actually yes, no, no but this type of response from the customer will help you
further tune your thinking with the customer's perception.
And then you say therefore if there is your own travel bus and you have a pickup service
for your personnel then perhaps you will solve logistics problem and you will reduce uncertainty
so you see here we are using this technique to prepare the ground for say industrial transporter,
transport equipment, some kind of a van or traveller type of multi-seat car. So, if you
again I will repeat so you have survey type of questions, you have probing questions,
you have confirmation questions and you have need satisfaction oriented questions. So,
survey questions reveal customer problems, probing questions reveal customer's pain,
confirmation questions reveal mutual understanding and need satisfaction questions reveal potential
pleasure or customer's delight. So, ultimately you want to go to the delight
but to do that you have to go through the stages, the survey, the probing, the confirmation
that is the way you have to uncover. You cannot get to that need satisfaction situation, the
delight creator straight away, you have to go through this process to discover, uncover
the core of the problem where you can delight the customer. So, here in the initial part
you know it is better to some prepared questions, some pre-planned questions can be used.
Note the customer's response and then you proceed to the need discovery worksheet. The
need discovery worksheet is often actually based on some preliminary understanding of
the problem, some preliminary description of the solutions that you can offer and then
it should not be a close-ended presentation but it should be an open-ended presentation
that stimulates more conversation. So, do not show that what is the solution that you
are offering but rather look at various kinds of options that you have in your range, in
your product range, in your solution techniques and so that you can get more specific.
So, use a funnel approach here that start from a very generic survey type of situation
then get to more specifics of the problem, there also stimulate conversation and narrow,
narrow. So, start from this thing and narrow down into very specific two or three points
where the customer will be just delighted with some superior solution that you can offer.
So, the spin selling therefore you use less of the situational type of questions, try
to find those more from your prior research so that you do not spend too much time on
S that shows you are not prepared, that shows you have not studied your customer but spend
more time on the P and the I that means the core nature of the problem and the implications
of your solution. So, therefore the narrowing down the more quickly you can actually progress
from the preliminary opening gambits to the more specific discussion and you can have
more time spent at that stage you will be operating more effectively.
So, the time spent is during the consultative sales presentation somebody who is using this
spin technique is shown on this diagram. So, you can see here that in the need discovery
stage on the extreme left hand column the prospect the buyer is talking a lot more than
the sales person. The sales person is only facilitating the conversation, only stimulating
the conversation, allowing the customer to talk more and more, getting more and more
data so that your offerings become very targeted immediately attractive. So, the more time
you give to the customer to talk and you make careful notes will create a much better
situation in the next stage which is selection of the product. So, here this is selection
of the product or proposing the solution. So, here the more time that you spend will
be effectively spent, will not bother the customer, but will attract the customer if
you have allowed the customer to talk a lot more in the first part.
Because you have to cut your quote according to the cloth available as well as according
to your buyers deep and deeper needs, the express needs as well as your buyers latent
needs. So, when you make your presentation in the second part it will create lots of
interests, if your fact finding has been good, if your prior research has been good, if you
have spent more times on the S type of questions, do not waste the time in the encounter with
the S type of questions, but even the P type of questions should be limited. So, get to
the implications, get to the benefits and advantages offered by your solution and that
should all hit the bull's eye if you have done your prior research well.
And then of course, you should in the need satisfaction stage, the more you talk, the
more you enquire even after the sale, the more conversations you keep going even after
the sale even though that is not leading to an order booking. And I know it is for
a sales person the temptation is very high to focus on the new sale and forget about
the sale already made, but that is a very short term approach that will not work in
today's relational selling a consultative type of selling situation. So, keep the conversation
going even after the sale has happened, get feedback about how the product or service
is actually solving customer's problems, find the way it is meeting the promise or
if it is not meeting the promise then where is the gap, the more you spend time on that
your next sales presentation will be much more successful and you will possibly get
a referral which will warm up the process as we discussed in an earlier that initial
stage opening part of the sales presentation can become better if there is a social context,
if there is some kind of a referral at that stage that will you know make your target
much more attainable.
And last slide for the day is the value and building the partnering relationship will
happen if you actually have a good strategic plan, the things that we have discussed in
this week session and the actions that you take as in response to that strategy as an
execution of that strategy. So, with that I will end today's session, this was a session
on.
Thank you.
