To access the translated content: 1. The translated content of this course is available in regional languages. For details please visit https://nptel.ac.in/translation The video course content can be accessed in the form of regional language text transcripts, books which can be accessed under downloads of each course, subtitles in the video and Video Text Track below the video. Your feedback is highly appreciated. Kindly fill this form https://forms.gle/XFZhSnHsCLML2LXA6 2. Regional language subtitles available for this course To watch the subtitles in regional languages: 1. Click on the lecture under Course Details. 2. Play the video. 3. Now click on the Settings icon and a list of features will display 4. From that select the option Subtitles/CC. 5. Now select the Language from the available languages to read the subtitle in the regional language.
[Music]
[Music]
welcome back so we discussed in previous
couple of lectures about the defaults
and now in this particular lecture or
maybe one or two lectures we will
discuss mostly about the defaults
actually that how we identify the fault
on the surface now as I mentioned in my
first lecture that overall the formation
if you take and then I have shown one
sketch where you you must have seen the
the the combination of the anticline and
the st. line again
now this anticline and syncline will
occur in combination and in some
locations you will have the fractures
okay or the the displacement among the
strata and that what we call Falls so
basically what we see that there's
overall deformation will be seen in the
area where we are having the ongoing
crustal deformation and then mountain
building activities so if you take in a
total sense what we will find as the
this is because of the ongoing crystal
deformation the rock deformation takes
place and which results in two different
attitudes of the rocks and where we will
see the the fold Falls fractures and
joint sinking so rock deformation refers
to change in the shape volume or
orientation of a rock due to changes in
temperature and pressure over the time
this is this is there because of the
what we we have we discussed in one of
the course for the plate tectonics right
but in this the brittle or ductile
deformation if you take you will mostly
see the the folding okay of course the
pressure and temperature will play an
important role and the type of
deformation
that is whether it will take any form of
Umbra tile deformation or it will be in
ductile deformation so the rocks in the
Earth's crust and upper mantle are
subjected to stresses developed due to
plate moments and by load due to burial
at different depths in the earth again
so when we say at different depth in the
earth interior there comes the
importance of the the pressure and
temperature so differential stresses are
due to plate movements and are
directional okay so this differential
stresses you will experience in the
uppermost part of the and the crust but
if you will go into the deeper part then
it is almost uniform deformation okay so
this direction stresses causes the
formation of rocks and if the conditions
are idle the results in into braking
fracturing or which will result into the
development of force so if you look at
the three stresses Sigma 1 Sigma 2 Sigma
3 so at the deeper part of the earth
interior you will see almost uniform
stresses whereas in the upper part you
will see that these stresses are one of
the stress will be maximum and that is
what we call differential stresses okay
or the stresses are directional and that
will lead to the the deformation either
we are talking about the compression or
extension or slip past each other away
so this are the differential stresses
very commonly observed that if you keep
on increasing this stress okay
the strain will develop and initially
you will have the elastic deformation so
any material or the Earth's material I
will go into first of all the plastic
deformation and this will take place
until point of their elastic limit
beyond that if you keep on applying
stress if the material will get into the
ductile deformation and what we call at
one point of time it will have permanent
strain so it will deform it will not
come back because will we see elastic
then it may rebound back okay but in
some at some point of time it will not
rebound back but it will deform and will
have permanent strain developed here
further if you keep going and increasing
the stress after the threshold limit of
any given material it will fracture and
this fracture is seen on the surface
because when you see if we say fracture
then there will be displacement of
stratas and that will lead to the
formation of faults so this is just an
example of an per cylinder cylindrical
Rock which has been taken and when there
is we keep applying the stress okay
then at one point of time at the deeper
portion what you will see that it will
go into ductile deformation but it isn't
the shallower crust okay
he will have little deformation that
means you will see the fractures and
false which are developed within the
material there are a few examples of the
fractures in rock along which there is
displacement and there's a straight
linear feature where some of us may say
that this is a linear meant but this
linear meant is a is a fault so fault
the manifestation of ongoing deformation
is seen on the surface I will come to
this fault this is an example from a San
Andreas Fault system and this fault is a
right lateral fault
whereas here what do you see is the
displacement this is again in the
section and this displacement isn't
typical of the normal faults where do we
classify the normal fault and reverse
fault based on the relationship of the
either what the walls on either side of
the fault plane that is football and the
hanging wall so in this case the hanging
wall has moved down and football is has
remained stationary now fault slip is
response to the stresses okay either you
will see extensional compressional or
lateral shear so in almost all
geological situation stresses are
mutually perpendicular to one another so
this what we we know that we have the
Sigma 1 Sigma 2 and 1/2 Sigma 3
so if you take the different type of
deformation or the faulting areas you
have the reverse Falls you have normal
Falls and you have strike-slip faults
okay that is you are having the lateral
shear so in lateral shearing mostly what
you see is not the Sigma one that is the
least stress is along the fault plane or
the line of fracture whereas in case of
the normal fault you have the least
again along the fault plane and the
maximum is vertical in case of the
reverse fault the maximum is horizontal
so here we can say this is compression
this is extension electronic environment
and this is here having the lateral
shape where the movement will take place
along this planes okay but this is the
fault line here and here we can see this
one is the whole penalty so Falls in
total if we take okay we have a fracture
in rock along which block of rocks slip
past each other is known as fault
surface expression in form of elevated
cliff exposed at the surface due to
falling is termed as false cup false
curbs are the manifestation of crystal
deformation associated with active
faults
because what we see today is the ongoing
or the manifestation of the ongoing
deformation and since we turn this on
surface that is a fault
and it is active because otherwise we
will say this is dormant okay so dormant
fault features or the morphology will
not be I will not be sustained for a
longer period because it will undergo
erosion but if you see a very sharp
feature on the surface could be related
to the ongoing tectonic deformation so
this deformation is the representation
of Earth's surface in form of displaced
landforms so this we will see in couple
of slides now onwards but what are the
different type of Falls that we have
discussed but how they are been seen on
the surface okay because what type of
features we will try to we should try to
look at to identify or how the
respective force okay now there's a very
good example which shows this section
there is a sectional view as well as the
topography of which is reflected now the
reverse Falls we have couple of slides
later where we will classify and talk
about the reverse Falls but here I would
would like to just emphasize upon the
displacement which is seen along the
fault plane and it's manifestation on
the surface so if so based on the the
color variation or the tonal variation
of the rocks along the the exposed
section you can easily make out that
what type of fault it is again if we
take this layer this is an white
here which sits somewhere here so on the
top you have this reddish sandstone here
also you have reddish sandstone and this
has been demarcated the displacement
along this plane and this is what we
call the fault plane so the displacement
or what we see is that this block has
moved up so again we have the attitude
of this fault
okay so with respect to horizontal you
can measure this fault angle and of
course the strike you will be able to
see on the surface of the fall scrap so
what we have seen that this block has
moved up and it has created the
topography which you can see here so
this topography which you will be able
to see on surface in a plant view is
termed as fault scarp
so we won't be able to see the section
using satellite photographs or satellite
data but we will be able to see the
false cups and this is extremely
important because if we say or define
the active Falls then as for the
definition of the earth default what we
say that there was a movement along this
fault in last 10,000 years
this means that within the Holocene and
there is an likelihood of having future
earthquake along this fault if we say
that these are the active force
so this is one very important part now
if you we understand that this is an
active fault and you have identified the
default scope on the surface so no
construction should be allowed on the
fault so you need to avoid those areas
and for this you need to mark the buffer
zone and this is extremely important for
the country like us where maximum or we
can say the infrastructure development
is on boom so looking at further this
thing that mode of the different type of
falls on the basis of sense of slip
along the fault plane the Falls are
categorized either as in strike-slip
faults or depp's LeFort so if you see
here and what we have is that either you
are going to look at displacement along
the strike I'm showing my hands okay so
if you if you can see that so if you are
taking place along the strike along the
strike so this is the displacement you
will see okay and that what we will call
the strike slip and if you are having
the displacement along the tip of the
fault plane then that will be termed as
the dip slip force okay so either the
block will move up or the block has
moved down okay and you may have a
combination of both both in the sense
that you will have the movement along
the strike as well as
along the depth and that type of falls
where we have the combination of this
two are termed as oblique slip falls so
let's see further in detail that
different type of falls and how you will
be able to demarcate those falls on the
surface again so mostly we see such type
of deformation or the manifestation of
such deformation in the areas where we
see mountain building activities as a
beautiful photograph of him aria from
kangra well ii where we have identified
couple of good signatures of act of
deformation okay so this part we
discussed in one of our course where we
talked about that formation of Himalaya
is the result of ongoing deformation or
the collision between the two plates
that is the Indian plate and the
Eurasian Plate where the Eurasian Plate
is riding on the top of the Indian plate
and which has resulted into the
formation of a mighty Himalayan so this
just to show you not how it looks like
okay if you so this is on satellite data
Landsat data draped over the subtle
topographic radar mission data is our TM
data to have a view of the terrain in
three dimension or three deep
respectively okay so what we see here is
so when you deform they complete him
earlier what we were looking at and some
one of this slide but you will find that
deformation is something like if you if
you deform the layers or you are
colliding two plates you will be able to
see now the folds okay and if you
try to read some text books where the
explanation of the Himalaya has been
given we say folded chain of Himalaya so
we have number of folded chains okay of
so this is one which has been seen here
I will just mark this one this is the
frontal most folded chain of which is
known as Jenna orienting line and this
is your indo-gangetic plain so I'll just
put it on the other side so that you can
see it clearly so this portion is your
indo-gangetic plain and this is a
boundary between the indo-gangetic plain
and the youngest mountain chain that is
your Shivalik hills okay further if you
move here you see a valley here and then
another mountain chain is coming up of
it and so on and then you are seeing the
towering height this is your high
Himalayas
and this portion which you see here is
your lesser Himalayas and this what we
call is sub Himalayas that is the
youngest mountain chain and this
blackish body which you see here is here
Bhakra Nangal dam okay it is an
interesting thing which has been seen
here I hope you are able to see that
there is some dermal effect which we
observed when we prepared this 3d
prospective view
and one can easily make out this thermal
effect or the the dome based on the
drainage can see the drainage which is
flowing away from the center so this was
one of the feature which we identified
and this deformation could be related to
this fault line and one another
important thing is that all this
mountain chains are bordered or bounded
to their south as well as in some pieces
to the north also so this is here not so
to the south and north by fault lines
again our default active faults you can
see so this is Himalayan frontal thrust
or Himalayan frontal fault
there's at an orienting line and the
Intermountain Valley between the two
folded chains of mountains we see that
is known as Sun doen and this is your
zone thrust over here then you are
having a swallow Mookie thrust over here
which is responsible for this
deformation in the conga belly and this
is Panjal thrust or a pump or thrust
sorry and then we are having main
boundary thrust and so on okay so these
are few things which you will learn in
coming slides also about amariah but
this is a broad classification what you
can see in this area because of the
ongoing deformation and collision
between the two plates okay that is the
Indian plate from south and then
eurasian plate or the tibetan plate
which is overriding the indian plate
from the north
so similar exercise can be done to
evaluate the terrain as well as to
identify the various landforms okay so
this type of exercise you can do to
generate the digital elevation model and
draping the Landsat data or the
satellite data to have a 3d prospective
use so this is what we are looking at we
have the ongoing deformation from both
the sides and we are having an
overriding plate or that the found
material riding over to the the Indian
plate okay there's another example of
again the normal fault but of course you
can think of that whether this should be
called as a normal or a reverse fault
now this is again an important but
whatever the parts of the faults here
which are been listed here can be
obtained if you are able to see the
section otherwise it will be difficult
using the the satellite data
interpretation at least you will be able
to see the false cuff here okay so this
is this portion is your false Club now
this is the case of a normal mode so we
are based on the two units or maybe the
surface offset you can talk about the
net slip you can talk about the heave
that is H which is termed as the
horizontal component of the depth
separation it gives the amount of land
shifted sideways then we having throw
how much the land has vertically moved
so is the vertical component that is
throw
of the depth separation it gives the
amount of vertical displacement then we
are having the head that head is the
angle of fall plane with respect to
vertical again and as we were talking
about the depth okay so dip is always
been taken the amount of depth or the
immoral with respect to horizontal so
these are a few points which you can
keep in mind and when you go in feel and
try to look at the section you can
measure all this information which is
again an important one giving the tip is
extremely important the displacement
that is the sense of movement is
extremely important because these are
the information which you will have to
put in your report so one is step second
is your throw third is the net slip if
it is required but I would say that this
two are extremely important along with
the what we call the strike so how the
fault is oriented what is the sense of
movement and third us the depth in which
direction the fault is dipping okay so
this is very important so strikes the
Falls as we were talking about are those
Falls that accommodates horizontal slip
between the adjacent block along this
strike of the fault line so this is the
important part of the strikes their
fault the movement will take place
always been seen along the strike of the
and dips were false but again different
incense because as I was showing you
that the moment takes place along the
depth so the slip is being served either
upward or downward along the depth of
the ball playing game so if you classify
the normal faults they are modeled to
steep angle 40 to 70 degree and those
dip less than 45 degree are referred as
low angle normal fault thrust fault
depth less than 45 degrees usually
around 30 and the reverse fault dip is
greater than 45 degrees so this the
photograph which I was showing with a
scarf like this and the displacement of
the fault like this so this is an high
angle hence we can classify this as an
the reverse fault okay so in terms of
the the thrust fault you will have a
shallower angle okay that will be less
than 45 degrees okay now in this case of
the both the cases like this one here
that is a thrust and the reverse fault
are the result of compression tectonic
environment where is this one normal
fault is extensional tectonic
environment this you will have to
remember okay and let me tell you and as
I was emphasizing that you need to be
extremely careful while preparing your
reports or the interpretation because
you need to have know that whether it is
a normal fault or you are looking at the
thrust or the reverse fault
and which block has moved up and which
blockhead don't doesn't that those parts
or that information will be extremely
useful and you have to do it critically
again so if you look at this cartoon
here what it shows again it shows that
one block has moved the side another
block is moving in this and that is
taking place along this line this isn't
typical of strikes their fault because
this is the strike this is your fault
plane here this one is the fault plane
so all the fault plane is almost
vertical and the displacement which has
been seen or observed is along the
strike of the fault that this one
typical of strike-slip faulting now can
we see this deformation or the
manifestation on the surface that
question we should ask ourselves okay
the answer is yes if the fault is active
then you will be able to pick up this on
the surface okay now what are the
features you will be you should pick up
or try to look at to identify or
classify I would say the Falls okay
let us continue this in the next lecture
again thank you so much
[Music]
[Music]