To access the translated content: 1. The translated content of this course is available in regional languages. For details please visit https://nptel.ac.in/translation The video course content can be accessed in the form of regional language text transcripts, books which can be accessed under downloads of each course, subtitles in the video and Video Text Track below the video. Your feedback is highly appreciated. Kindly fill this form https://forms.gle/XFZhSnHsCLML2LXA6 2. Regional language subtitles available for this course To watch the subtitles in regional languages: 1. Click on the lecture under Course Details. 2. Play the video. 3. Now click on the Settings icon and a list of features will display 4. From that select the option Subtitles/CC. 5. Now select the Language from the available languages to read the subtitle in the regional language.
[Music]
[Music]
so welcome back as so in the previous
slide and the short movie what you see
is that we have different material
either we can say the different sites
one was rocky another was soft
agreements and then we are having in
water saturated sediments so effect of
the they safely say it's McPhee which is
passed which pass through this area
rocky soft and water saturated so they
will behave differently and the
amplification the effect of that seismic
wave will be different at different
point of home point now in the previous
lecture which I was showing showing that
you how why it is so important to map
the active fault on the surface that is
the surface subject is that without
having the understanding one should not
put the house right on the top of the
default scrap all the default all mine
otherwise you can experience and total
damage if there is inductor of course in
the epicentral area the peak ground
acceleration will be extremely high but
and along with that if you are if you
know the line of surface rupture or the
fall time you need to avoid putting your
structure on top of that so
amplification will vary from place to
place and as we were talking about that
if you have the loose sediments mostly
closer to the river valleys or the the
alluvial plains or the flood plains you
may experience a
severe like fraction phenomena so the
seismic shaking amplification and
duration this is an example from Mexico
the concern was mostly about the
depopulation because most of the
populations the settlements we will come
across will be in the the alluvial
plains because of several reasons for
the water resource and also for the
fertile land and all that so large
portion of the Mexican city sets on the
bed of Lake Texaco since European
settlements way back in 520 eighty the
area provides flat terrain this is one
reason which I was talking for a time
soil ideal for the settlement so any
settlement even if you go back and try
to look at the Indus Valley Civilisation
most of the sites where along the
adjacent to the riverbed and this is one
of the reason even today you will see
really public population is in the
indo-gangetic plain because of the flat
terrain for Thailand water is easily
available so people of course have more
try to settle down in such areas but
this terrain and thick lake deposit lead
to one amplification of the seismic wave
and extended the duration of this
seismic shaking from the earthquakes so
this is another added problems which we
will experience and usually people
experiences there in the the alluvial
plain areas so we will one will be
amplification second because of the
amplification you will see more than
duration of the shaking will increase so
this example if you look at from the the
effect of seismic energy amplified due
to 1985 earthquake
having its epicenter located about 400
kilometer away from the Mexican city so
Mexican city is located here and this is
an schematic diagram the earthquake was
triggered somewhere here epicenter which
was almost 400 kilometers so what would
have been expected is that in the
epicenter area maximum damage wasn't
would have occurred and the duration
would have been larger here but that did
not happen the the amplification was
comparatively higher 400 kilometers in
the away from the epicenter area that is
in the maximum City and the reason was
what we were talking about in the
previous one that the old city or the
settlement is sitting on the lake
deposit and the duration was also much
much higher as compared to what was
experienced in the inter central area
there is in between in some regions the
the peak knowledge station was
comparatively lesser but even of 400
kilometers the peak ground acceleration
was much much higher so the important
part is how far we are sitting there
will be one criteria of course but what
are the deposits underlying deposit that
will be the most important parameter
once you understand if you're sitting on
the hard rock of course you are to some
extent safe you will not experience the
the amplification but if you are sitting
on on softer material or your buildings
are sitting on the softer material even
though you are sitting away from the
epicenter area you are bound to
experience peak ground acceleration will
be much much higher now this is another
example which will clear your
understanding about the seismic shaking
so change in the field loading
conditions as the energy that is an
seismic wave propagates towards the
surface upward from the hypocenter it
changes and slowly what happens is that
over the time you will have the
deformation because of the cyclic stress
so this will go back and forth back and
forth and that will result into your
increase in pore water pressure complete
compaction of the water saturated
deposits for the material now here Rho
prime is or Sigma prime is your initial
effective stress vertical overburden and
tau is your horizontal cyclic shear
stress so if duration is much higher
then the effect will be much much higher
so loosely packed deposits will have
larger pores filled up with water but
yes of course this should be water
saturated if it is not water saturated
then chances are less to enter into the
liquefaction phenomena so near the
surface if you are having unlik we find
then or these will define silty sand but
two meters you are having porous
deposits like sand cohesionless
saturated with water water that will
result into the neck fracture so
liquefaction usually take place where
the sediments are cohesionless are
completely saturated it depends on the
relationship of the cyclic shear
stresses developed by earthquake shaking
and the amount of stress required to
trigger the
like fashion depth of the occurrence of
like fraction varies from few meters up
to tens of meters but below this up to
ten meter if you are having like chances
a bit less but of course you will have
the liquefaction will not reach right up
to the surface it will within the
subsurface layers because of the
overburden but below that you will not
be able to experience much of the look
fracture development of liquefaction is
highly difficult at greater depth the
reason is because of increase in normal
static effective stress which will
increase the resistance of the sediments
to share or deform because it will be
difficult to share the material which is
sitting at the greater that so what we
see here is is this schematic diagram
which talks about the non like fiber
layer with low permeability and this is
an porous layer or the liquid layer
mostly the cohesionless sent but water
saturated so when the cyclic shear
effect the sediment package here we will
result into increase in pore water
pressure and this liquefied material
will be poured out through either
through conduit in a form of sand layer
and this phenomena is very much similar
to what we see in the volcanic eruptions
now some time it has been also seen
because for if we need to do the seismic
micros donation then we try to take
number of boreholes and then we study
the stratigraphy and we also try to
understand that how thick
is this unit that is the unit of itches
which will be prone to liquefaction and
which is a non-league viable unit so
this is your H 1 and this is your H 2 so
this also will be if this is very thick
then you need more of the peak ground
acceleration to break this unit if
there's a thin then even with the lesser
ground-shaking you will be able to
experience the diffraction and the
threshold limit to trigger the leg
fraction is with the North quake of
magnitude 5.5 if you have then it is
quite likely that you will experience a
lick function if a site is idle then
item situs what we we have discussed
this that we should have an like a
cohesive less sediments
be you have like water-saturated
and then see you should have uncapping
of non
only 13 unit that is a rich one and this
one would be a
this is an ideal condition which we
should have even with the magnitude of
5.5 you will be able to trigger the leg
fraction these are a few examples which
talks about that how the value dick
fraction or the neck fraction which took
place or triggered by the previous
earthquakes I will look like so doesn't
again a section as we were looking at
the sections of faulting events or the
ruptures along the active fault this is
the similar to that but this is for
liquefaction now these are the craters
which have been formed and these are the
knut which broke this units and they
have they have brought the material from
subsurface and when such depressions are
been created on the surface because of
the strong ground shaking and some point
of time you see also the deposition
which is thing because it is a
depression so material will come into
the depression and will get deposited
but one interesting thing which you
shouldn't mark here is that when the
liquefy the the material with the high
pore pressure moves up through the
conduit it breaks this unit of a because
it is coming up here so what you see
here is the broken disoriented fragments
of layer one or sorry that the unit C so
in this you the the broken fragments are
been seen disoriented so this we we say
the rip up class okay so we are having
class which have been broken from the
the overlying units when the material or
the liquefiable material is moving
towards the surface this also helps us
in identifying that this conduit is is
the feeder type for the other feeder
conduit for the liquefiable material
coming right up to the surface
even if you are having the liquefaction
taken taking place in the deeper part
and they may not reach right up to the
surface but they are died out getting
liquefied material right like it is it
gets along the these sedimentary layers
which we call cells so this is an
example from liquefaction from mundum on
where you can I'll show in one slide so
we exposed the serum in succession in
Endermen after 2001-2004 under once more
through earthquake and looking for the
tsunami deposits but we we came across
very beautiful like fashion features
also so here you see the class sitting
in this clay bed so this one class which
I was showing it's similar to the eye
the conduits and this one type which is
coming up very beautiful one so this is
the source unit and this is a conduit
which is coming up in and depositing so
there's a very small scale crater and
cowardice and sandblow which was been
formed because of the previous
earthquake but this was not related to
2004 Sumatra and man but this is an
older event by older earthquake which
resulted into the or caused the lake
faction in this region similarly you can
see the class here of this same clay
bird and this is a sandwich was been
poured out because of these strong
ground shaking again this is not related
to the 2004 but in the previous large
magnitude earthquake in this region
surface manifestation of liquefaction
features what we saw from the settle
radar topography mission data in just
after the 2001 Bhuj earthquake in most
of the areas which was water saturated
or near surface water saturated
sediments were available or the units
were available we saw that the water was
been
poured out in the great run of Kutch and
many people started talking about that
the ancient dried bit of Saraswathi is
now revived because of this water coming
right up to the surface but this was in
temporary phenomena this was not
impermanent phenomena and as I discussed
that there will be in strong ground
shaking and the material the porous
material which are saturated I will get
will be compacted and because of the
high pore water pressure the water will
be almost ejected out on the surface so
I'll stop here and we'll continue in the
next lecture
trying to see more signatures of the
lake faction and as I told that this is
very important part of course we need to
know that what type of material on which
our construction has been done and how
far we are sitting from the resource
thank you so much
[Music]
[Music]
[Music]