To access the translated content: 1. The translated content of this course is available in regional languages. For details please visit https://nptel.ac.in/translation The video course content can be accessed in the form of regional language text transcripts, books which can be accessed under downloads of each course, subtitles in the video and Video Text Track below the video. Your feedback is highly appreciated. Kindly fill this form https://forms.gle/XFZhSnHsCLML2LXA6 2. Regional language subtitles available for this course To watch the subtitles in regional languages: 1. Click on the lecture under Course Details. 2. Play the video. 3. Now click on the Settings icon and a list of features will display 4. From that select the option Subtitles/CC. 5. Now select the Language from the available languages to read the subtitle in the regional language.
Welcome to the lecture on powder based processing.
Melting parts, there are four common approaches for using powder bed fusion process in the
creation of the complex metal component.
Fully melt, liquid phase sintering, indirect processing, pattern methods.
So full melting is you try to take two powders, you fully melt those powders.
Liquid phase sintering is you have two powders where in between these powders on top you
are coating with another metal which has a lower melting point and this can give you
a better consolidation.
Then indirect processing and pattern methods we will see in detail.
As discussed previously, in the full melting approach, a melting powder material is fully
melt using high power laser or electron beam.
And in liquid phase sintering approach, a mixture of two metal powders or metal alloy
is used where a higher melting temperature constituent remains solid and the lower melting
that is what I said lower melting constituent melts and it helps in sticking with each other.
In indirect processing, a polymer coated metallic powder or a mixture of metallic and a polymer
powder are used for part construction.
So once only for the part construction, after the part is constructed, you burn the polymer.
So the figure in the next slide we will see shows the step involved in indirect processing
of metal powder.
During indirect processing, the polymer binder is melted and binds the particle together
and the metal powder remains solid that is indirect.
The metallic powder particles remain largely unaffected by the heat of the laser.
The parts produced are generally porous and the polymer bounded green parts are subsequently
furnace processed.
So what you do is you try to get a shape out of the polymer binder and you also heat the
polymer binder so that these polymer binders can stick to each other and then form a shape.
After it forms a shape what is required then you take it to a furnace, blow or burn away
all the binders.
So moment the binder is burnt, so what is left with you, you can take that and go for
next stage of post heating process to get the required output.
So the metal parts furnace processing occurs in two stage, one is debinding and infiltration
or by consolidation.
In debinding, the polymer binder is vaporized to remove it from the green part.
Typically the temperature is also raised to the extent that a small degree of necking
occurs between the metal particles.
Subsequently the remaining porosity is either filled by infiltration of a lower melting
point metal to produce a fully dense metallic part or by further sintering and densification
to reduce the part porosity.
This is very important.
If you are happy with the porosity, live with it.
If you are not happy, you try to infiltrate material where is the application.
You make ceramic porous material and then inside the ceramic metal through the pores
you try to infiltrate metals.
So these metals which are infiltrated gives you lubrication.
So there we use this application exhaustively.
Consolidation is easier to control dimensionally as the overall shrinkage is much less than
during consolidation.
However, infiltrated structures are always composite in nature whereas consolidated structures
can be made by a single material type.
Infiltrated structures are always composite in nature.
So you will have a base structure.
For example, what are we talking about this is a base structure and here are the infiltrated
material.
These are liquid infiltrates or solid infiltration.
These are all the metal parts, particles, okay.
However, the infiltration structure are always composite in nature whereas consolidated structure
can be made by a single material too.
So you make particles and then you bind it.
After you bind, you try to sinter it and still you have pores.
You infiltrate a liquid of the same material.
The last approach to metal part creation using powder bed fusion method is the pattern approach.
For the previous three approaches, metal powder is utilized in the powder bed process.
But in this final approach, the part created in the powder bed process is a pattern used
to create metal parts, pattern used to create metal parts.
The two most common ways of powder bed fusion created part are utilized as pattern for a
metal part creation or as investment casting patterns or as sand casting patterns.
So basically what we do is in sand casting, we try to make patterns.
This is mold, this is sand, okay.
This is a pattern which is created by this process.
Investment casting also we can do.
We can try to take this out of polymer, pattern out of polymer.
Then what we do is we give a ceramic coating on top of it, heat the ceramic so the polymer
which is inside melts and dies off or it is into liquid, you pour it off.
Now what you have is a shell, a ceramic shell.
This ceramic shell can be used as a pattern and then you can start making lot of applications.
You can use polymer, you can use wax also.
In the case of investment casting, polystyrene or wax-based powders are used in the machine
and subsequently invested in the ceramic during post processing and melted out during casting.
In the case of sand casting mold, this is a sand casting mold, the mixture of the sand
and the thermosetting binder are directly processed in the machine to form a sand casting
core cavity or insert.
Ceramic parts like metal parts, ceramic parts also can be created.
The only difference between metal and ceramic is metal, lower melting point as compared
to that of a ceramic.
There are a number of ways that powder bed fusion processes are utilized to create ceramic
parts.
These include direct sintering, chemically induced sintering, indirect processing and
pattern methods.
Like in metals, here also you will have pattern methods.
In direct sintering, a high temperature is maintained in the powder bed and the laser
is utilized to accelerate sintering of the powder bed in the prescribed location to form
each layer.
The resultant ceramic part will be quite porous and thus are often post processed in the furnace
to achieve higher density.
This high porosity is also seen in chemically induced sintering of ceramics.
The indirect processing of ceramic powder is identical to indirect processing of metal
powder.
What was the indirect way?
This is what it is.
So, you will have a loose powder.
So, in the loose powder, you can see metal or ceramic particles mixed with a polymer
binder.
These are polymer binders.
So, the powder bed fusion process happens.
So, this is consolidated and you try to make a green part.
So, you just melt the polymer.
So, the polymer stretches or ties the ceramic or the metal particle.
And then what you do is, you take it to a furnace, heat it.
When you try to furnace heat it, all these polymer goes away and some amount of necking
happens between the two particles, metal or ceramic, depending upon the temperature.
And then what you do is, you try to take it to further processing, furnace processing,
you see a better consolidation happening, okay.
And here, wherever there was a hole, vacant spot, you have infiltrated through some material.
So, that is as required.
For example, copper can be done, aluminum can be done, lead can be done for your requirements
for lubrication effect.
Metals and ceramic particles binded with the polymer are seen here.
Next melting and re-solidification of polymer binder enabling the complex part to be formed
without thermally affecting the metal or the ceramic powder.
So, the particle is as such.
Then the polymer vaporization and particle sintering at elevated temperature happens,
resulting in a porous sintered component.
Then you infiltrate with lower melting point metal, resulting in a density finishing component.
So, this is the flow for indirect processing of metals and ceramics.
After debinding, the ceramic brown part is consolidated to reduce the porosity and is
infiltrated.
In the case of infiltration, this can be done by two pressure.
It can be done by positive pressure or it can be done by negative pressure.
That is vacuum can be applied.
You suck and then allow the material to flow or you pressurize the liquid material to flow.
When metal powders are used as the infiltrant, then a ceramic metal composite structure can
be formed.
In such a case, such as when creating SIC structure, a polymer binder can be selected
which leaves behind a significant amount of carbon residue within the brown part.
Infiltration with molten silicon will result in the reaction between the molten silicon
and the carbon to produce SIC.
This is how people produce SIC parts, SI, molten SIC and carbon, thus increasing the
overall SIC content and reducing the fraction of SI in the final part.
So, the variant of powder bed fusion processes, a large variant of powder bed fusion process
have been developed today.
What we have seen is only few successful processes.
People have come up with variants depending upon their requirements.
To understand the practical difference between these processes, it is important to know how
the powder delivery method, heating process, energy input type, atmospheric conditions,
optics and other features vary with respect to one another.
An overview of commercial process and a few notable systems under development are discussed
in this section.
Laser-based system for low-temperature processing – there are two major producers for low-temperature
laser bed, powder bed fusion technique.
These low-temperature machines are designed for directly processing polymer and for indirectly
processing of metals and ceramics.
Both these companies sell and service their machines worldwide.
Low-temperature powder bed fusion machines designed for polymer processing are commonly
called as selective laser sintering machines or laser sintering machines.
The SLS machines, machine model were commercially introduced and these systems are currently
manufactured and supplied by 3D System USA, which purchased DTM in 2001.
This industry is fastly changing and companies buy companies, companies sell companies.
So there is not a single owner for a long time.
Like in automobile, we have few giants.
So in rapid manufacturing or in rapid prototyping, we do not have a single giant.
They buy, establish a technology, sell it, then establish another company.
So this keeps going.
So 3D System purchased DTM in 2001.
So this is the schematic diagram for laser sintering process, selective laser sintering
process.
So you have a powder bed.
So in this bed, you can have a polymer, metal or a ceramic.
Powder can be there.
So this powder will be, is there.
So this powder is now moved into a powder bed.
So this powder bed is otherwise called as a table.
The powder bed moves up, the table moves down.
So the roller, which rolls from one side to the other side, tries to take the required
quantity of a single layer of powder and spreads it on top of a table.
And then this roller goes to the other extreme end.
In the next time, when the single layer information of sintering is over, the bed pulls it down
by a single layer.
This powder delivery piston goes up by a single layer.
The roller takes the material from this extreme end and moves to the table and then goes to
this extreme end, okay.
So this extreme end.
So now what you have is layer by layer by layer information you have.
And that is how it is done.
So here you have laser.
This is the optics, which is attached with the laser.
This is the scanning mirror.
So it gives you 2D layer information for producing.
The newer machines offer several improvements over previous machines in terms of part accuracy,
temperature uniformity, built-in speed, repeatability, feature definition, and surface finish.
And by the way, you should also understand there is a heater placed around the powder
bed.
Here in the center portion, there is a heating.
It will not take you to very high temperatures.
And then on the delivery piston here also, you will maintain or the entire system will
be maintained at a – inside a small furnace at a lower temperature, not melting temperature,
in order to make sure no contamination happens with respect to the free atmosphere.
The water molecules will – should not be there and it should not react.
So they do it or they put it inside a furnace and purge it with argon gas.
So the laser acute – the laser resolutions are improved.
The powder size has been – the powder size has been reduced.
Then uniformity in powder size is done.
Then the laser scanning speeds have become high.
Then the repeatability, the drive mechanisms have improved.
So these are certain things which are kept on be – going on in the SLS process, so
that now you get better features.
The 3D system low temperature machines are designed to run a large variety of powders
– powder material type.
Due to the use of CO2 laser and nitrogen atmosphere with approximately 0.1 to 3% oxygen, these
machines are incapable of directly processing pure metals and ceramics.
And assets are optimized to process polymer materials with nylon polyamide material being
the most popular one.
The other one is where in which you use a binder which is kept in a printer head and
then this binder, instead of a laser, that laser is replaced by a binder head.
This binder – the binder head or the – sorry.
The next advanced version is removing the laser and then replacing with a print head.
So this print head will have a nozzle.
This will be several nozzles.
And through these nozzles, every nozzle you will have orifices.
So these are nozzle.
These are orifice.
Through this orifice, the binder material falls down and this binder material drops
on the location wherever you have to join the particles and then you get an output.
So these are – they can also process polystyrene based casting material and elastometric materials
directly.
And they often offer indirect processing of metal powders with polymer binders.
This is an advanced next variant of SLS process.
There are four big companies which make commercially available laser based systems for direct melting
and sintering of metal and ceramic powders – ESO Germany, MTT UK, Concept Laser Germany
and Phoenix System France.
So all the four are a big player.
And now they are available in the market.
They do a wonderful job, all the four.
They are competitors.
Not all of these companies sell and service machines worldwide.
For instance, all four companies sell machines in Europe whereas EOS and MTT actively sell
systems in the United States.
So they also have a fixed market.
They go through it.
In India, you can get all the four through an agent.
The most commonly used terminologies to describe this category of technology is selective laser
melting.
However, the term laser – the laser cuesing and direct metal laser sintering are also
used by certain manufacturers as mentioned in the following sections.
For this discussion, we use SLM to refer to the technologies in general and not to any
particular variant.
Compared to polymers, the high temperature conductivity, the propensity to oxidize, surface
– high surface tension, low absorptivity of the metal powders make them significantly
more difficult to process than polymers.
These are important properties which have to be noted.
Today, commercially available SLM – so the same laser cannot be used.
The interaction time cannot be the same.
Today, commercially available SLM systems are variant of the selective laser powder
remelting approach developed by Fraunhofer Institute at Germany.
Their research developed the basic processing technique necessary for successful laser-based
point-wise melting of the metal.
The use of laser with wavelength better tuned to the absorptivity of the metal powder was
one key for enhancing SLM process.
For example, there is a red laser, green laser, blue laser.
The response of the red laser, blue laser and green laser are completely different.
So depending upon the requirement, they choose the laser, okay.
And in terms of when you talk about laser material interaction, it is the absorptivity
property which plays an important role.
Subsequently, almost all SLM machines today have transitioned to fiber laser, which in
general are cheaper to purchase and maintain more compact energy efficient and have better
beam quality than NDIAG laser.
3D Micromac AG, Germany is the laser processing company which has developed small scale SLM
processes with small build cylinders of 25 millimeter and 50 millimeter in diameter and
the height of 40 millimeter in height.
So today when we are looking at bio implants, when we are looking at microfluidic channels,
when we are looking at electronics, when we are looking at MEMS application, where directly
you want to produce from the start, from the building block, we use this technique for
making the final part.
In fact, there are certain complex geometries which are used, complex geometry parts which
are used as ear implants, which is too difficult for you to generate through subtractive process,
but the additive process develops it within no time.
And again, you can also have functionally graded material there.
So this makes the implant very sensitive to even small deflectors, small deflections or
change in pressure.
So for ear implants, SLM process is the only process used for making metal based parts
for those applications.
So here it is rapid manufacturing and as I told you earlier, when we try to do one layer,
in a single layer, you can initiate an array of metal parts together.
So maybe in one shot, like if you have 30 centimeter cross 30 centimeter table and if
your component size is hardly 2 centimeter, okay.
So now what will happen, you can make 25 or 30 parts, layer by layer by layer it can be
done.
If you finish one part, you will also get 30 parts and array of parts are made.
This is the new technology where people are using towards rapid manufacturing.
You plan properly, use rapid prototyping techniques for manufacturing live applications.
The fiber laser is focused to a particular small spot for small feature definitions.
In order to use the fine powder particle size necessary for fine feature reproduction, they
have developed a unique two material powder feeding mechanism.
A build platform is located between the two powder feed cylinders.
When the rotating rocker arm is above the powder feed cylinder, the powder is pushed
into the feeder, thus charging the hopper.
When the rocker arm is moved over top of the building platform, it deposits and smoothens
the powder moving away from the building cylinder prior to the laser processing.
By altering between the feed cylinder, the material being processed can be changed in
a layer by layer fashion, thus forming multi-layer structures.
An exclusive distribution arrangement of ESO announced in 2005 may one day lead to machines
becoming available to consumers who wish to purchase their own equipment.
So, like desktop printing, we will have desktop 3D printing machines wherein which they can
use laser because the lasers are also becoming economical.
Initially, which was a solid state laser, now it has become a fiber laser.
Fiber laser are economical.
Of course, when you go for higher powers, it has lot of other technical challenges.
But nowadays, the fiber lasers are becoming very economical.
Replacing laser with electron beam is a new trend.
Why?
Because laser could have a precise control of sintering.
So, electron beam melting has become a successful approach in powder bed fusion.
In contrast to laser bed systems, electron beam uses a high energy electron beam to induce
fusion between the metal powder particles.
This process was developed in Kalmar University of Technology in Sweden.
So, now today it is available in the market.
Similar to SLM, the EBEM process, a focused laser beam scans across a thin layer of pre-laid
powder causing localized melting and re-solidification as per the slice cross section.
So, it is a pixel of information, one spot.
However, there are a number of difference between how SLM and EBM are typically practiced,
which are summarized in the table.
I will show you the table next.
So, these are the summarizing thing, thermal source, electron beam, laser beam, atmosphere,
you have vacuum, you have inert gas, scanning, it is a deflection coil.
So, here we use, in EBM, we use a deflection coil, here we use a galvo, because the galvo
is used to give the information on x-y plane.
Then energy absorption is in conductive, here it is absorptivity.
These two properties are completely different.
Surface finish is a optic based property.
Then pre-heating, use electron beam can be done, infrared can be used to avoid the contamination
from the free atmosphere getting mixed.
Scanning speed very fast, it is limited.
Electron, because the laser can be, the coil is used, deflection coil is used, so it can
scan at very high speeds.
The energy cost is moderate, it is very high.
Surface finish is moderate to poor, it is excellent to moderate.
The feature resolution is moderate in electron beam, excellent in selective laser melting.
Materials, it can be used for metals, it can be used for any metals, metals and non-metals.
This is a typical part, which is a knee joint, which is made using H13 tool steel by using
electron beam melting.
You see a wonderful surface finish.
Today, it has become a mandate and it has become an integral part of the knee surgery.
See, the interesting part is, when we start working on this knee joints, we realized many
things.
When I also worked, we realized many things.
No two patients will have almost the same knee joint, because your body to mass index
is different and your loading pattern is different on the knee.
So in that case, the knee joint is not constant for everybody.
So you have to first scan your knee, understand the negative counterpart from the MRI information,
try to make a polymer model, look at your knee joint.
Once you have understood everything, then take the same CAD model, go to electron beam
or use SLM process, try to make your part.
So this part is custom made for you.
Many a times, you can see that doctors are involved in doing a knee implant operation
for 7 hours and 9 hours.
The majority of the time is towards mass customization.
How do we custom make this to the patient?
The electron beam are inherently different from laser beam, as electron beam are made
up of stream of electrons moving near the speed of light, whereas laser beam are made
of photons moving at the speed of light.
So moving near the speed of light, here speed of light.
When the electron beam is passing through a gas at atmospheric pressure, for instance,
the electron interacts with the atom and gas and gets deflected.
So you need a vacuum chamber to be attached in the machine.
In contrast, the laser beam can pass through a gas unaffected as long as the gas is transparent
to the particular wavelength.
Thus, electron beam is practiced in low partial vacuum environment, whereas the fiber laser
is used in any atmosphere, provided the laser should be allowed to pass through.
The electron powder bed are maintained at higher temperatures than SLM process.
First, there are several reasons.
The first is the higher energy input of the beam used in electron beam system naturally
heats the surrounding loose powders to a higher temperature than the lower energy laser beam.
Very important.
So that means to say you will have a spreading of a spot.
In order to maintain a steady state uniform temperature throughout the build, the EBM
process uses an electron beam to heat the metal substrate at the bottom of the built
platform before laying the powder.
It heats the electron beam, metal substrate at the bottom of the built platform is heated
before the powder is laid.
By defocusing the electron beam and scanning it very rapidly over the entire surface of
the substrate or the powder bed, the bed is preheated rapidly and uniformly to have a
preset temperature.
Suppose the temperature is too low, you apply so much of heat, conduction phenomena comes.
Because of this conduction phenomena, there is a, the resolution is lost.
As a result, the radiative and resistive heating present in most SLM system for powder bed
heating are not typically used in EBM.
It is not the resistive heating or infrared heating.
By maintaining the powder bed at a elevated temperature, however, the resulting microstructure
of a typical EBM part is significantly different from that of SLM.
Completely different.
If you see the microstructure, it will be completely different.
EBM gives a very good output.
In particular, SLM, the individual laser scan line are typically easily distinguishable,
whereas in individual scan lines are often indistinguishable in EBM microstructuring.
So this is a very, very important advantage of using EBM.
You get a very smooth surface.
The finishing, the post processing becomes very easy as far as electron beam is concerned.
Rapid cooling in SLM creates small grain size and subsequently, subsequent layer deposit
only partially remelt the previously deposited layer.
The powder bed is held at low enough temperature that elevated temperature grain growth does
not erase the layering effect.
In electron beam, the higher temperature of the powder bed and the larger and more diffused
heat input results in continuous grain pattern or resulting in contiguous grain pattern that
is more representative of casting microstructure with little porosity than SLM process.
Electron beam is very advanced and defect free because spot size, heating, controlled
grain structure, you get the best output.
Line wise and layer wise powder bed process, the powder bed process have proven to be the
most flexible general approach to rapid manufacturing.
The large variety of the material, manufacture and applications that are available surpasses
those of any other approach powder bed.
However, the use of expensive laser or electron beam, the fact that the beam can only process
one point of the material at any instant of time, the overall cost of the system means
that there is a considerable room of improvement.
Why?
Because the laser can go spot by spot, EBM also can go spot by spot.
So now instead of going spot by spot, if I can put a small mask and allow light to fall,
the entire thing is done as one line in one shot with very high resolutions.
As a result, number of organizations have developed ways to fuse lines or layers in
a material at a time.
Like photolithography, photolithography is what?
You have light, just take an X-ray, you have taken an X-ray, you fix the X-ray on a flat
transparent tube light box and the doctor looks at the X-ray.
So it is almost the same, the tube light is coming from the other side, the X-ray is a
mask which is put on the top and the doctor is viewing from this side.
So if the light is allowed to pass through the mask and if that mask, the dust light
tries to hit at the object, that is nothing but a powder bed, so then what you get is
the entire layer information in one shot.
You can do point, line, layer or do line, layer or do layer.
All the three options are possible.
If you do point, we use laser, we use binder, we use e-beam.
When you use line, it is an exposure we can do in one shot.
So you mix a polymer with a metal powder and the polymer is cured by a UV light, possible.
As a result, a number of organizations are developing ways to fuse lines and layers of
material at time.
Although these processes currently used to low off temperature to a process metal directly,
the potential for polymer processing in a line wise or a layer wise manner could increase
the build rate of powder bed process, thus making them more cost effective.
So you see here, this is what is the example I gave, an infrared from the top, you have
a mask, then you have a bed, you have a, this is a feeder cartridge, from the feeder cartridge,
this is a roller, this rolls and add materials to the table and the table sinks.
So you get one layer of information, one the mask layer is kept, IR is exposed.
So you get one layer of information on the top.
Three of these processes will be discussed below.
All the three utilizes infrared to induce fusion in the powder bed.
Heat, basically you can have metal and polymer also there or you can use only polymer.
The key difference lay in their approach to control which portion of the powder bed fuses
and which remains unfused as illustrated below.
So you can use a mask type, you can use printing of an absorptivity enhanced agent in the part
region and then printing of sintering inhibitor outside the part region.
So here it is inkjet, okay.
So here what the inkjet printing of absorptivity enhancing agent.
So here you just ink, the jet is printed and then you use infrared.
So this infrared is to create a layer.
The third one is going to be inkjet printing of sintered inhibitants.
So you have an infrared, you have a layer of information.
So the center portion alone, the outside portion is done, center portion is not done.
So the key characteristics of this technology are exposure of the entire layer at a time
to infrared thermal energy through a mask and a rapid layer of powder making.
Their powder delivery system can deposit a new layer in 3 seconds.
The heat energy is provided by a infrared heater.
A dynamic mask system, we can use DMD or you can just keep flipping like a movie.
Olden days you had a film roll passed through continuously and you see a movie.
So in the same way, dynamic mask systems similar to those used in a photocopier to transfer
ink to paper is used between the heater and the powder.
This is a rebirth of an idea conceived by Cubital for layer-wise photopolymerization
in the early days.
The SMS mask allows infrared energy to impinge on the powder bed in the region prescribed
in the layer.
The high speed sintering is process being developed at Lockbourne University in UK.
You see many of the variations are still in the research phase.
The high speed sintering, an inkjet printer is used to deposit ink onto the powder bed
presenting a parts cross section of the layer.
Ink are specially formulated to significantly enhance the infrared absorption compared with
the surrounding layer.
So ink is spread, you have an infrared, so the ink cures the powder joints, you get the
part.
The infrared heater is used to scan the entire powder bed quickly following the inkjetting.
Thus this process is an example of line-wise processing.
The difference between the absorptivity of the unprinted area compared to the printed
area means that the unprinted area do not absorb enough energy to sinter, whereas the
powder where the printed ink is there, it absorbs.
Again as distinguishing factor between the fused and unfused region is the enhanced absorption
of the energy where printing occurs, the ink are typically grey or black and thus affecting
the color of the final part.
The third approach, you just drop ink there and the ink is cured.
The third approach to rapid powder bed fusion is the selective inhibition sintering process.
In contrast to high speed sintering, the sintering inhibition is printed in a region where fusion
is not desired followed by the exposure of the infrared.
In this case, the inhibitor interferes with diffusion and the surface properties to inhibit
sintering.
A sintering, it is just a negative, a sintering inhibitor is printed in the region where fusion
is not desirable.
You put a negative to the previous process.
In this case, the inhibitor interferences with diffusion and the surface properties
to inhibit sintering.
In addition, researchers have also utilized movable plates to mask portion of the powder
bed where no sintering is required in order to minimize the amount of inhibition.
The fused metal deposition system, a number of processes have been developed that uses
the principle of blowing metal powder into the melt pool created by the laser.
So look at it.
So you will have a laser which comes and hits.
Then you have a powder metal supply with gaseous is done and here is a plate to hold this gas
feeding.
So the particle are hitting at the surface and the gas is used.
So this process is called as fused metal deposition process or it is called as LENS, laser engineered
net shaping.
So this was developed in John Hopkinson University.
So here what happens, the laser moves, the plate where the two gases are there, that
also moves.
So it is all coaxial, you get it and then the carrier gas is also used to feed it.
So the process parameters are, as far as laser is concerned, laser power, spot diameter,
pulse duration, frequency are very important.
Scanning related properties are scanning speed, scanning space and scanning pattern is very
important.
Powder related, particle size, particle shape, distribution, powder bed density, layer thickness
and material property.
Temperature related parameters are powder bed temperature, powder feeder temperature
and temperature uniformity.
These are some of the process parameters which are very important to be controlled.
To recapitulate in this lecture what we covered was, what are the approaches to metal and
ceramic metal part creation, explain the different variants of powder bed fusion.
So we saw a spot, then we saw a line, then we saw a layer making.
What are the different materials used for powder based fusion?
These are certain things which we have gone through in this lecture.
Thank you very much.