noc20-bt01-lec29_ Lecture 29: Nursery Techniques

IIT Kanpur July 201
20 followers
1 Video View·Dec 2, 2023
Lecture 29: Nursery Techniques
Namaste, we carry forward our discussion on silvicultural practices and today we will
have a look at nursery techniques.
So, what is a nursery?
A nursery is a production unit where forest seedlings are grown.
In our case we are only talking about the forest nurseries, we are not talking about
horticultural nurseries or agricultural nurseries.
So, in the case of a forest nursery it is a production unit, it means that the major
objective of setting up a nursery is to produce things.
It is not a research organization, it is not for any other purpose, the primary purpose
is production of seedlings, so it is a production unit where forest seedlings are grown.
Now the question is we know that we can raise plants from seeds, so why not just go into
the forest area, those areas where you want to do the afforestation and just disperse
the seeds there.
What is the importance, why do we need to have a nursery?
This is because the nursery provides us with certain advantages.
So, what is the advantage of raising the plants in a nursery vis-a-vis raising the plants
directly on the field?
The need for nurseries, the first is to grow and maintain a large number of plants per
unit area.
Because a nursery is a small place and you can do very intensive management in that small
area, so it is possible to grow a large number of plants in a very small area.
Now area or land is a very pricey commodity and when you want to have a large number of
plants in a small area, to produce a large number of plants in a small area, you need
to do an intensive management and the place where you do this intensive management is
the nursery.
Small and expensive hybrid seeds can be raised more effectively due to better care and management.
Now because you have a small area, a more intensive management, so it also means that
the raising of plants is much more effective, is much better when we are doing this operation
in a nursery as compared to doing this operation out in the field.
Then increased germination percentage and vigor of seedlings grown in seed beds.
Now in the case of a nursery, we make seed beds, we provide those conditions which are
optimal conditions for germination and for the growth of plants.
So this results in a much better or increased germination percentage and also the vigor
of seedlings.
Now vigor refers to the hardiness of the seedling and also the rate of growth that it will show
once you have planted it out in the field.
Now because in a nursery, the plants get the most optimum conditions, so they put up a
very fast growth and once they have shown this fast growth, once they have become hardy
enough to put them out in the field, then in the field as well they will be showing
a very fast growth.
So the vigor is much better when we talk about plants that are raised in the nurseries.
Better management with reduced care, cost and maintenance due to small area.
Now let us consider two scenarios.
In one, we are enclosing a small area and we are making a nursery and in the second
one, we are doing the, we are raising the plants out there in the field.
Now let us say that we are raising say 1000 plants here.
Now because of intensive management, you are having a much greater density of plants, whereas
if you were to raise these same number of plants out there in the field, the density
would have been much lesser.
So this has a higher density and this has a lower density.
Now let us consider some management intervention that we will need to provide to these young
seedlings that are growing.
Let us say that we will, that we need to provide water to the plants.
Now in this scenario, in the case of a nursery, because this area is small, so it is much
cheaper to provide water, whereas in the case of the forest area, you will have to traverse
long distances to give water to each and every plant.
But then giving water is not the only intervention, you will have to do weeding as well, so that
your plants that have germinated are not out competed by the weeds.
Now when you want to do weeding, weeding is typically a very labor intensive job.
Now in the case of this small nursery, the people can come to this area, a large number
of people can come into this area and do this weeding in a very time efficient manner, whereas
in the case of raising the plants out in the field, the person would have to go here, then
here, then here and so it becomes very much time consuming just to traverse these larger
distances.
Consider another management intervention, application of fertilizers.
Here again in the case of a field scenario, the persons will have to traverse long distances.
Similarly application of insecticides or pesticides.
So when we talk about a nursery, the management is much better with reduced care, cost and
maintenance due to the small area, because the area is small and in this small area you
are raising a large number of plants.
So per plant cost, per plant maintenance goes down.
Easy manipulation of growing conditions, now there are some plants that require some manipulation
in the growing conditions, such as in the very early stage of their lives, especially
if it is a shade bearing plant, so this plant would have to be provided with some amount
of shade, whereas later on this plant probably will be requiring more intense sunlight.
Now in the case of a nursery, because you are growing these plants in a smaller area,
so manipulation of these growing conditions is very easy, because you can very easily
put up a thatch roof or say a shade net on top of those seedlings that need to be provided
with the shade.
So manipulation of the growing conditions is very easy, better and uniform crop growth
in the field due to selection of vigorous and healthy seedlings.
Now in the case of any growth, if let us say we plant, we plot the number of plants versus
height.
Typically when you are, when you are using seeds to make these plants, these plants would
show a curve like this.
So this is like the average height of the plants, but then there will be some plants
that show a very low height and there will be some plants that show a very great height,
a large height.
Now this is very similar to what we see even in the case of human beings, all of us have
different heights, but then we can say that for any race there is one standard average
height, but then we also find in the population that there are some people who have a lower
height and some people that have a higher height.
Now in the case of plants as well, if you look at any parameter, be it height, be it
growth, so let us say the growth rate, there will be some plants that grow at the average
rate, there will be some plants that grow very fast, there will be some plants that
grow very slowly or let us say resistance.
Now this can be resistance to say drought or insects or diseases.
Here again you will find that most of the plants will be having an average resistance,
some will be very highly resistant, some will be very low resistance.
Now when you are growing these plants in a nursery, it is possible to do a grading
of these plants and then select the best plants for sending out in the field.
So for instance if you are going for production forestry, you want to have plants that grow
at a much faster pace.
So in the nursery when you are raising the seedlings for say 2 or 3 years, at the end
of these 3 years, you can select those plants that have been showing a very fast rate of
growth and you can send those plants to the field.
So all the plants that are finally planted on the field will be showing a very fast rate
of growth.
So it is possible to have a better and uniform crop growth in the field, better because you
have selected for those plants that are showing a faster growth rate and at the same time
it is uniform.
So all of your plants will be growing at nearly the same rate because of which any silvicultural
operation that needs to be done later on to the stand will become much easier to manage.
So better and uniform crop growth in the field due to selection of vigorous and healthy seedlings.
So those seedlings that are showing fast growth and those seedlings that are completely healthy,
only those are selected to be sent out to the field.
Most off season sowing of seeds is possible.
Now what happens in nature is that a number of seeds germinate in the rainy season, but
then rainy season is also the best season for the establishment of a seedling.
So if you have a seed or if you want to raise plants out in the field, it is much better
to begin a bit before the rainy season.
Now in a nursery you can artificially irrigate the seedlings, you can artificially make them
germinate by manipulating the conditions in the nursery.
Once your seedlings have germinated, you can grow them.
So because you can manipulate the growing conditions, so it is immaterial which season
you are doing the plantations or which season you are raising the seedlings.
So you can begin in say the spring season or you can begin even earlier in the winter
season and you can ensure that by the time the rainy seasons come, your plants are already
a bit big in size, so they are like this big, so that when you put them out in the field
they have a competitive advantage.
So this off season growing of seeds is, sowing of seeds is possible in the case of nursery,
but it is very difficult out in the field because you have little control over the growing
conditions.
Now lower seed requirement of nursery raised crops due to better management, so because
of better management, because you are able to provide better protection, you are able
to provide the management interventions, so a large number of seeds germinate and they
also are able to survive as seedlings.
So if the mortality goes down, the seed requirement also goes down, as we have seen earlier the
total number of seeds depends on the number of plants that you want to plant, but it is
also dependent on what is the rate of germination, what is the rate of mortality, what is the
loss factor in pecking out and so on.
Now in the case of a nursery you have much better control over germination, mortality
and so on, because of which the seed requirement typically is lower.
And easy management of insects, pests, diseases and weeds, because these plants are growing
close together, so it is very easy to apply insecticide, pesticide, weedicide on to your
young seedlings.
So we can see that nurseries have a very important role to play in the silvicultural operations.
Now the next question is where do you plan a nursery, what are the locations where your
nursery should be located, so there are certain sighting factors that help us to select the
location for setting up a nursery.
The first is even topography, because your nursery will be a very small place, but if
it is a flat land then the management will be much easier, because your staff will be
able to traverse easily.
And also because irrigating of this area will become easier if the topography is even.
Typically we prefer sites with loamy sandy soil with large organic matter, because a
loamy sandy soil is perhaps the best soil for the growth of plants, for the growth of
a majority of plants.
And if you have this soil then this soil can very easily be used in the making of the growing
beds or as a potting medium, so loamy sandy soil with large organic matter is preferred.
There should be good availability of water in the site, because you will have to irrigate
the seedlings, there has to be a good amount of drainage, so that there is no water logging
that will inhibit the growth of seedlings.
There should be an ease of transportation, so typically we locate our nurseries near
to the roads, so that once the plants have been cultivated in this area, it is easy
to transport them out into the field.
Easy availability of labour, because nursery management is a very labour intensive job
and you require a number of manual operations to be done, whether it is taking out the seedlings,
transplanting them, filling up the polythene bags and so on.
So, there should be an easy availability and perhaps also a cheap availability of labour.
Protection from animals, because these seedlings are also very good food for animals, so typically
you will find that the herbivores will try to enter inside, because of which you need
to have good amount of protection, perhaps by means of fencing or by means of walls.
And large markets or plantation sites, so that ultimate transportation cost go down
and also located in a pollution free area, because in the case of very polluted areas,
you have large amount of settlement on top of leaves, which also reduces the photosynthetic
ability of the plants.
So, typically we want to have our nurseries in areas that are pollution free.
Next, how do you lay out a nursery?
A nursery needs to have several things, so there will be certain areas, where you will
be raising your beds.
Let us say that this is a nursery, so there will be certain areas, where you will be raising
the beds, so this is where the plants are actually grown.
Now, these beds should also be accompanied by trees to provide certain amount of shade
to the beds, so that these are not completely exposed to the sun.
Then in the nursery you will require these roads, so that people are able to access the
beds for the different management operations that will be required.
Now, at the same time you will probably require a source of water, so probably there is a
well or a tube well with a pump set, which is providing water perhaps through pipelines.
Now, because you need to have a chowkidar to protect this area, so you will also require
a chowkidar hut in this area.
Then there will also be a unit for storage, so because you need to store the seeds, you
need to store fertilizers, manures and so on, plus all of this area will have to be
fenced for protection and also you will have connection to the main road for transportation.
So, this is a typical layout, so here in this picture we can see that here we have the beds,
here we have a tube well that is providing water for irrigation.
Here we are seeing that there is a storage room, we see a plenty of trees in this area
to provide shade to the bed, so there will be some beds that will be having a larger
amount of shade, there will be some beds that will be more exposed.
Now, fencing is very crucial for a nursery, so if you did not have a fencing here, then
the animals will be able to get inside, so here we can see the fencing poles and there
is barbed wire that is moving around.
Now, fencing can be of different kinds, we mostly use barbed wire fencing because it
is cheap, but we can also go with a chain link fence or a stone wall or a wooden wall
or a brushwood fence.
Now, a brushwood fence is also known as a barbed fence and in the case of a brushwood
fence, people take brushwood, now brushwood is branches and twigs of different plants,
preferably those plants that are a bit thorny and they can be made into a fence that is
a brushwood fence or we can even go with live fences like agave and open shear.
So, these are those plants that have thorns or spines and these plants can be raised along
the boundary of the nursery to act as a fence, so these will be known as live fences or green
fences.
So, this is a typical barbed wire fencing, here we are seeing these cement poles, so
these cement poles are reinforced poles and they are put in into the ground by digging
a hole and putting the fence, putting the pole and then also putting concrete around
it for setting it up.
And then there are certain projections on these poles on which the barbed wire fence
is laid.
Now, along with the concrete poles, we can even make use of wooden posts, so this is
a fencing with wooden posts, so we have wooden posts and we have these barbed wires.
This is a typical brushwood fencing, so these are just some twigs and branches that have
been fashioned into a fence, this is a stone wall fencing.
Now, typically you will also have boards for information to public, because a nursery also
serves as a point where people can purchase or procure these plants.
So, if somebody wants to raise a certain species on their fields or in their homes, they can
purchase the plants from a nursery including a forest nursery.
Now, the nurseries can be raised by the department or in certain cases, we outsource them to
the joint forest management committees.
Now, we will have a look at this joint forest management in a later lecture, but we can
also have nurseries that are being managed, that are being built and maintained and managed
by the joint forest management committees, mostly in collaboration with the forest department.
Now, in these nurseries we make beds, now what is a bed?
A bed is defined as a land made free of weeds, stumps, stones, pebbles etcetera used for
sowing of seeds to raise seedlings and multiplication through vegetative propagation.
So, what we are saying here is that a land will be having a number of inert materials,
a number of which will not be useful or may even be detrimental to the growth of seedlings.
Now, if you prepare your land in such a manner that you have removed all these detriments
such as pebbles, stones, stumps and so on, then this prepared land is known as a bed.
And there are three different kinds of beds, we can have a sunken bed, a flat bed or a
raised bed. So, what we are saying here is that if you take a piece of land and you have
removed all the pebbles, stones, stumps and so on and you have prepared this land to raise
your seedlings, then this will be called a bed. Now, you can have a flat bed or you can
have beds if you look at them from the side, you can have a bed like this. So, this is
the ground level. So, you can have a bed that is a raised bed and here you have channels
or you can have a bed that is a sunken bed. So, this is a sunken bed.
In the case of a raised bed, you will be raising plants above the ground level. In the case
of a sunken bed, you will be raising plants below the ground level and in the case of
a flat bed, you will be raising your plants on the ground level. Now, when should we use
which kind of a bed? A sunken bed is typically used in dry season and in windy areas because
it conserves moisture. So, in the case of this sunken bed, if you add water to this
area, the water will enter into these beds and it will stay in these beds for a longer
period of time. So, the water gets concentrated in these beds. So, we prefer them in the dry
seasons or in windy areas because if you look at the impact of wind, then these structures
will protect the plants from the impacts of high winds, especially the desiccating impact
of the winds. So, we prefer sunken beds in dry seasons and in windy areas.
Flat beds are made at the ground level. Raised bed is used in wet seasons because it prevents
water logging because what happens in the case of a raised bed is that the water is
not able to accumulate on the top. So, any water that accumulates goes down and then
moves away in this channel. So, water logging of plants is avoided. So, typically in the
rainy seasons, we go with raised beds and a flat bed is used when the season is neither
very dry nor is very wet. So, that is the average sort of a condition. So, we have these
three different kinds of beds. So, this is how these beds look like. Now,
this one is a raised bed. So, we are growing plants in this area and these are the channels.
When the plants grow, it looks like this. So, here we can see that these beds are raised
up from the ground level and the plants are being grown on top of these beds. Sunken beds
look like this. So, here is the ground level and we have made a depression and in this
depression, we are raising up these plants and a flat bed is like this. So, here on the
ground level itself, grass has been removed and we are raising the plants in poly pots
in this flat bed. Now, in a number of situations, when we are
growing plants in polythene bags, we also add a plastic sheet beneath these poly bags,
so which is a very thick sheet. So, we can see it here. So, this plastic sheet prevents
the growth of roots if they are able to move out of the polythene bag. So, essentially
what we are saying here is that in the case of a polythene bag, so we have soil here,
we are raising a plant here, but in certain situations, the roots of the plant are able
to penetrate the polythene bag and if these roots are able to reach into the ground, then
the plant will start to establish itself out here in the nursery.
Now, a nursery is not meant to for this seedling to establish itself. A nursery is meant so
that this seedling can later on be transported to the field and planted there. So, to prevent
its establishment, what we do is that we add a thick sheet of polythene below this polythene
bag, so that the roots are unable to reach the ground. When we are making these beds,
we need to treat the soil. Now, treatment is typically two kinds of treatments are done.
The first one is soil solarization. What is solarization? You take the soil, break it
into small parts, break up the lumps and spread it out in the sun, so that the sun is able
to dry up the soil and also the ultraviolet light is able to reduce or eliminate the pathogen
load in the soil. So, that is soil solarization. So, we typically do it before we are making
the beds. The second treatment is treatment with chemicals including formaldehyde, fungicides
such as Kapton and Theorem, insecticides like chloro pyrifos and bio agents such as trichoderma
fungus. So, formalin kills possibly all forms of life that are there. So, essentially if
you have a soil that is having a very high pathogen load, you will typically treat it
with formaldehyde or if your soil is having pathogenic fungi, you will treat it with fungicides.
If you have insects or pests, then you will treat it with insecticides and bio agents
such as trichoderma fungus are added to the soil because it acts as a symbiotic fungus
which helps in the growth of the plants. So, different kinds of treatments are given to
the soil and as we have seen before, before sowing the seed is also given certain treatments
typically soaking either in cold water, hot water or boiling water or in certain cases
acid or mechanical scarification or treatment with fungicides and or insecticides may also
be required before the sowing operation. Now, once your seeds are ready, once your
beds are ready, you need to ensure that you have proper growing medium for the plants.
We have two different kinds of media, one is the germination medium and the second one
is the growing medium. Now, a germination medium typically is just plain sand. So, you
can raise a bed. So, let us say that this is a raised bed and on top of it, you can
add sand on which you will add the seeds, irrigate it and you have the plants that
are growing here. Now, once these plants have germinated because
they will germinate in a very high density. So, next we will have to reduce the density
and this reduce, this reduction of density is done through a process that is known as
pricking out. Now, what is pricking out? In the process of pricking out, you will take
these plants and move them into another bed while maintaining the proper density. So,
we are removing these plants from the germination bed and we are shifting it to the growing
bed. Now, in this growing bed, we will need to
put the growing media. So, this is not just sand, this is a growing medium. Now, growing
medium comprises of a combination of soil, sand, compost and additives. Now, soil is
important for the growth of plants, sand is added to make the soil more porous. So, addition
of sand will ensure that there is no water logging and the plants are able and the roots
of the plants are able to get access to the air. Compost is added not only to fertilize
the soil, but also to ameliorate the structure of the soil. So, organic matter is added and
also we can add certain other additives such as moss. Now, moss is also added to change
the structure of the soil or we can add peat. Now, a peaty soil is a soil with a high organic
content. So, here again when we are adding peat, we are increasing the organic content
of the growing medium or we can add coco peat, which is a replacement for peat for
those areas where we do not have access to peat. So, it is made out of coconut shells
or we can add vermiculite. Vermiculite is a substance that is produced by heat treatment
of mica and this substance is able to help the soil retain moisture and it also changes
the structure of the soil or we can add pearlite, which is a natural mineral of volcanic origin.
It is very similar to sand or we can add sawdust. So, we can add all these different additives
depending on whether we need to change the structure of the soil. So, these are the growing
medium. Now, later on if we want to shift these plants
into polythene bags, then we can also make use of the growing of the potting medium.
Now, potting medium is something that is used in pots. So, what we are talking about here
is that if we have a polythene bag and this polythene bag will also have to have certain
soil. So, this soil is the potting medium. So, in this case we are shifting one plant
and we are planting it in this polythene bag. Now, this potting medium typically is a 1
is to 1 is to 1 ratio of sand soil and compost or farm yard manure. So, this is a typical
combination 1 is to 1 is to 1 sand soil and compost or farm yard manure, which is used
to raise these seedlings in polythene bags or in pots.
Now, the sowing of seeds can be done by various ways. One way is broadcasting. Now, in the
case of broadcasting you just take the seeds in your hand and you just throw them out in
into the bed. So, when you throw these seeds this is known as broadcasting. Another method
is that of line sowing. Now, in the case of line sowing what we do is if this is a bed,
then we will create grooves in this bed. So, here we are making these grooves in the soil
and then we will add a seed at every certain distance in this groove and then we cover
these grooves with soil or the growing medium. Now, in this case the plants that come up
will come up at finite distances and in this case the density or the spacement of the plants
is easily controlled. Now, this is line sowing, whereas in the case
of broadcasting if you consider this bed, in the case of broadcasting it is possible
that you have a greater concentration of seeds here and a lesser concentration of seeds elsewhere.
So, in this case when the plants come up when they germinate, then you will have a very
high density here because of which your plants will not be able to grow properly, whereas
you will have very less density in the other areas in which case we can say that we are
not fully utilizing the bed. So, line sowing is able to overcome this issue.
Now, another way is to raise the plants in plug trays. Now, what is a plug tray? This
is a plug tray. So, here you have a tray that is made out of plastic, it has a number of
small plugs or containers in which the plants can be raised. So, what we do is if you have
these plugs, so we will add potting medium to them and then in every plug we will be
adding a seed and so we will have one plant in every plug. Now, the good thing about these
plug trays is that because they are made of these standardized sizes, so we can have machines
that can put seeds into these plugs. Otherwise, the option that is available is to do it manually.
In the case of a manual operation, the worker uses a sharp object to take out some soil
and create a hole. In this hole, a seed is put and then the surrounding soil is added
to it and in this way we are able to put a seed into one of these pots or in a polythene
bag. Now, the important thing to keep in mind here is that the depth of the seed should
be roughly 1 to 2 times the size of the seed. So, essentially your seed should be near to
the surface, but it should not be exposed to the surface and it should not also be so
down below that the plant when it is germinating it is not able to come out. So, roughly the
depth is 1 to 2 times that of the seed size. In the case of a plug tray, the machine can
be set so that it always adds these seeds at this particular depth. So, this not only
reduces the requirement of labor, but it also ensures maintenance of quality.
Now, once you have raised your plants, next you need to care for these plants. Now, what
is the sort of care that we require in a nursery? One proper handling during shifting, hold
the pots from the base and not from the top. Now, when people need to move these polythene
bags, so here you have a bag with soil and with a plant. When you need to move this polythene
bag from one place to another, you should hold it like this. Suppose, this is the plant,
you should not hold it from the plant, you should hold it from the base so that the plant
is not damaged. To proper placement of the pots, they should be placed in a flat position
and not on an inclined position. Now, this is because the roots are positively
geotropic. What do we mean by positively geotropic? They go towards, they go in the direction
of gravity. Now, suppose you kept a pot like this, in this case what will happen is that
your plant will start to grow like this and the root will grow like this. Now, later on
when you want to put this plant in the field, you will have a plant that is growing like
this, which is neither good for a field situation and at the same time the roots are not able
to get access to all of this soil. So, whenever you are raising these plants, they should
be raised in an upright position straight up.
Next hearing is thinning of the plant density. If you are growing plants that are very close
together, then one there will be a dearth of resources, they will be out competing each
other and two there will be a phenomenon that is known as whipping. Now, what is whipping?
If you are having plants that are very close to each other, then because each of these
plants wants to have access to light, it will try to grow up as soon as possible. So, you
will have these plants that grow very tall. Now, in these tall plants, they have not had
enough time to put up their sidewards growth. So, they are only growing in one direction,
they are putting all their energy in growing up. So, what happens in this case is that
because the sideways tissues are not developed. So, once you take this plant out of this scenario,
you will have a situation where you have this pot and you have this plant that starts to
whip. So, it is falling because of its own weight. Now, to avoid that you need to ensure
that the plants are not raised in a very high density environment, there is a thinning operation
that is done from time to time. Next you need to water the plants, you need
to do weeding, you need to do hardening. Now, what is hardening? When you are growing these
plants in the nursery scenario, so there you are putting a great amount of care, you are
giving a great amount of care to these plants, but then when once you shift these plants
out in the field in a forest area, then there is nobody to take care of them. So, if there
is a sudden shift between say watering every day versus getting water only in the rainy
season, then there is a good possibility that the plants might not be able to tolerate this
sudden shift and there will be a large scale mortality.
Now, to avoid that you need to harden the plants and this hardening is done by gradually
reducing the amount of water that is being provided to the plants and also by exposing
them slowly and slowly to more extreme conditions. So, for instance earlier if you were raising
a plant in a shade net, then you will gradually tend to increase the amount of light that
is available to the plant and finally, you want to shift the plant to harsh sunlight.
So, once this plant has remained in the harsh sunlight for a few days or say a few months,
then it is now ready for the field situations, because in the field it will typically be
getting a very harsh sunlight.
Then staking for support, now what is staking? In the case of some plants that are unable
to raise themselves, you might need to add a stake and tie the plant with the stake,
so that this plant does not fall down. So, there will be a stake right next to the plant
and the plant will be tied to it, so that this plant is not able to whip down. So, staking
might be needed, clipping of excess roots, so in the case of a plant, suppose the roots
have come out of the polythene bag, then they will need to be clipped at this point and
this clipping is also a caring operation to prevent the rotting of or the killing out
of the roots on exposure to pure air. Then control of diseases and control of pests
by the use of insecticides, pesticides and so on. So, here we can see that in a nursery
there is a large scale operation and people are regularly caring for the plants, regular
watering of plants is done, but then this watering also has to be controlled. Because
if we look at the impact of different amounts of water to a plant, so let us say that this
curve is showing that different amounts of water are being provided to the plants. Now,
this plant is only getting a small amount of water, so its growth is limited, this plant
is getting more amount of water, so it grows at a rate that is faster than that of the
first plant. But then in the case of this plant which is
getting a very large amount of water, then there will be water logging and this water
logging will then adversely impact the plant growth and the plant growth will come down.
So, when we are doing watering of the plants, this watering has to be adequate, it should
be neither very low nor very high. This is an image that is showing the hardening process,
so in this process these plants are being raised under a shade net, so that they are
not getting exposed to 100 percent sunlight, but they are getting exposed to say 70 percent
sunlight. So, you will move slowly and steadily from 50 percent sunlight, 60, 70, 80, 90 and
then finally out in the 100 percent sunlight. This is a weeding operation being done, so
here you have these polythene bags in which you have the plants and the grasses or other
plants that are growing in these poly pots together with your plant of interest are being
manually taken out, so this is the weeding operation.
We also perform grading operation in the nurseries and in the grading operation those plants
that are of the same size, that are showing the same growth characteristics, they are
kept together, so they will be sent out as a lot. These are plants that are ready for
sale or usage and here also we can see that there is these stakes that are there together
with these plants. Then transportation of these plants is done either by using a tractor
and trolley or by using small trucks in which these plants are kept.
So, in this case we can see that these plants have been put in three different shelves,
now these shelves need to be of at need to be at sufficient distances, so that the plants
are not damaged during the transportation. This is the raising of plants in containers,
now container is a plastic pot like structure and all of these are of standardized sizes,
standardized shapes and in this case the mechanization of plant growth or plant production becomes
easier, so this is a plant that is growing in the container.
Now, one innovation that has been done recently is that of the use of the raised iron beds,
now in this case what we are saying is that you have these iron stands on which we are
raising the plants. The use of an iron stand it is raising the plants, so it is very similar
to a raised bed, but then these plants are not in direct contact with the soil because
of which the chances of the plants getting exposed to the pathogens reduces drastically.
So, in this case we are using these iron stands and we are growing, we are putting the polypods
on top of these, now these polypods will be having the potting medium and perhaps this
potting medium is very different from the surrounding soil. So, probably the soil here
was not good enough for the plants, now here you have the potting medium which is very
different from that of the surrounding soil. Now, the best thing is that if you have pathogens
here, if you have fungi or certain insects that are not able to move very far, so these
fungi or these pathogens will not be able to reach into these polypods because they
are physically separated from the soil below. In the case of a raised bed your plants were
directly in contact with the surrounding soil, so if there are pathogens in the surrounding
soil they will be able to reach the plants, but in the case of a raised iron bed this
possibility goes down substantially. Now, in certain nurseries we also need to
make use of greenhouses, now a greenhouse is a structure in which the climate gets controlled,
you have plastic or glass sheets that are able to capture the sunlight and keep the
inside much warmer than the surroundings. So, we typically use greenhouses in colder
areas, these days in certain nurseries we are also using mist chambers, now what is
a mist chamber? A mist chamber is a room in which the humidity is controlled to a level
that is roughly equal to 100 percent. Now, what we are seeing here is that we have
these pipes on the top and from this these pipes will have a regular flow of mist because
of which and this room is covered from all sides, so because of this mist the whole of
this chamber will be kept at roughly 100 percent humidity. Now, why would you want to have
an area with 100 percent humidity? Now, this is because in the case of certain plants that
we are raising through vegetative propagation, then in the case of vegetative propagation
you have taken a poly pot added the growing medium and you have just added a part of the
stem. Now, this plant does not have roots, it does
not have leaves, now this plant needs to be kept in a situation where it does not dry
out because it does not have roots, so it will not be able to get water from the soil,
but then if the surrounding air is dry then this stem will dry out in no time. So, we
keep such plants in a mist chamber where you have 100 percent humidity, so that there is
no loss of water because of evaporation and we keep it till that time that it is able
to develop the leaves and the roots. So, this is a mist chamber and this is how a mist chamber
looks at looks while in operation, so here we can see that there is a mist of water that
is now surrounding these plants because of which they will not be any loss of water because
of evaporation. In certain nurseries these days we are also
using tissue culture, now in the case of tissue culture the parenchymal tissues of certain
plants are raised inside bottles in growing media, typically this growing medium also
contains agar, so that you have a solid medium on which to grow the plants and with the help
of tissue culture it is possible to do this vegetative propagation at a much faster rate.
Another way of vegetative propagation is through cuttings, now here we are seeing a nursery
in Punjab that is making eucalyptus through cuttings, so in this case the stems are cut
then they are then they are treated with certain hormones like root x hormone which will aid
in the growth of the roots and finally, we will be able to generate a large number of
eucalyptus plants through vegetative propagation. So, in this lecture we started with what is
a nursery, why do we need a nursery, what is the layout of a nursery, what are the
things that we need in a nursery and then what are the kinds of operations that we do
in a nursery. Now, these nurseries can be low tech nurseries
or they can be high tech nurseries, the high tech nurseries are those in which we are using
tissue culture and mist chambers and vegetative propagation and we looked at different kinds
of beds, we looked at different kinds of operations, we looked at the impacts of watering and so
on. So, that is all for today, thank you for your attention.
