Satellite date, Deformation, Earthquake, Mountain front sinuosity, longitudinal Stream profiles, Valley incision, stream Gradient index, Pseudo-hypsometric integral, Active-Inactive fronts, Backtilt, To access the translated content: 1. The translated content of this course is available in regional languages. For details please visit https://nptel.ac.in/translation The video course content can be accessed in the form of regional language text transcripts, books which can be accessed under downloads of each course, subtitles in the video and Video Text Track below the video. Your feedback is highly appreciated. Kindly fill this form https://forms.gle/XFZhSnHsCLML2LXA6 2. Regional language subtitles available for this course To watch the subtitles in regional languages: 1. Click on the lecture under Course Details. 2. Play the video. 3. Now click on the Settings icon and a list of features will display 4. From that select the option Subtitles/CC. 5. Now select the Language from the available languages to read the subtitle in the regional language.
Welcome back. So, as I told that in this new lecture, we will start with a new topic, and
this topic is of course, is related with the fluid geomorphology, but this portion in which
we are going to talk, we will mainly talk about the tectonic geomorphology. So, tectonic
processes are mostly related to the ongoing deformation, because of the plate motion,
and this, then basically the landforms, which are, we are going to talk about, are influenced
by the tectonic movements, and how we can decipher, or infer the influence of the movements
along the fault lines, or the weak zones. So, any deformation, which is taking place
between the two plates, the deformation is manifested on the surface, and the most affected
part of the surface will result into the formation of different drainage pattern.
So, the fluvial drainage, or the fluvial system, are one of the common features, which will
be influenced by tectonic deformation. So, let us see the tectonic geomorphology, and
discuss more in detail. So, tectonic geomorphology is the study of landforms, that are resulted
from tectonic processes. Morphological analysis in tectonic geomorphology, mainly refers to
the measurement of topographic expression from topo maps, or satellite data. So, the
surface manifestation of, or the, because of the influence of the tectonic movement,
one can easily extract the signatures from high resolution satellite data, and this can
help you in identifying the relatively active areas, in terms of the deformation, and that
can be taken into consideration for better seismic, or hazard assessment. Why I am saying
seismic, because any deformation, that is ongoing deformation within the plate, or along
the plate boundaries, will result into the earthquakes. So, they, the plate boundaries,
and within plate boundary, if it is under deformation, of course, along the plate
boundary, the deformation is ongoing, and that causes the, or trigger earthquakes. So,
earthquake is not the process, which will keep happening every day. Of course, the
earthquakes along the plate boundaries keep happening every day along the, or around the
world, but along a particular plate boundary, major earthquake, which are the damaging
earthquakes, will occur in the recurrence interval of almost like, 4, 500 years, or more.
So, morphological analysis in tectonic geomorphology, mainly can be done by the
measurements, using topographic signatures, from topographic maps, and again, topographic
maps means, we are talking about very high resolution topographic map. So, for example,
we are, we can use, may be 1 is to 10,000, or 1 is to 5,000, or 1 is to 25,000, and so,
what you can measure from the satellite data, or topo maps, is mainly, the mountain
front sinuosity, or facet. We can also term this as a triangular facet. So, this all are,
what we are going to discuss, are the tectonic geomorphic features. Then, you can also
talk about, as I was talking, as I told that, the, the fluvial system are very sensitive
to tectonic processes. So, longitudinal profile, as we, we looked at this portion, when
we were talking about the drainage basin. So, if you, if you have, if you say the longitudinal
profile, the longitudinal profile is the elevation, and the length of the channel, or the
drainage. So, mainly, if you take this, the longitudinal profiles, that can also help
you in understanding the ongoing deformation. So, this will result into the local base
level change, and local base level change can affect the, the, the drainage basins,
or the drainage system. Then, third is valley width, valley height ratio. So, this parameter
can also help you in understanding that whether the area is active, or inactive. If the area
is active, then the terrain, or the valley will remain in a very youthful state. So,
youth state, what you will see is, mostly the incision of the valley will take place,
and will always deliver a very young features, like gorges, or deep in, deeply incised valleys.
So, you will have narrow valleys, and, and if you are having the less activity areas,
then you will have, that is, the activity means, we are talking about the tectonic activity.
Then, the influence will be less, and you will have wider valleys. Then, fourth is pseudo
hypsometric integral. So, what are all these parameters, we will see one by one, and then,
the S L index, or stream gradient index, can also help you in deciphering, or identifying
the ongoing deformation. So, this all parameters, or the data, which you will, you can generate,
is related to, so, all the, the, the parameters, which are listed here, 1 to 5, are related
to the flow wheel system. So, mainly, you will, you put basically, the landforms, which
are associated again, the drainage are influenced, and this type of landforms are
been carved. If, if you say, the mountain from
Sinocity again, this will, Sinocity will depend again on the drainage, which are evolving
from the mountain, and, and flowing across the, the mountain, uplifted mountain fronts,
and the phase sets are also developed there. So, we will see one by one, and then,
longitudinal profile, valley width to valley height ratio, pseudo hypsometric integral,
this is again related to the longitudinal profile,
and stream gradient, is again also related to the, so, so, this all parameters are related
to your flow wheel system. Now, if you take the topographic map, this
topographic map is from Himalaya, and 1 is to 20, 1 is to 50000 map. So, what it shows
is that, this, these are the, so, one can easily
make out the, the, or identify the, what is the
terrain in this region, based on the contour spacing. So, if you see here, this is the
boundary, where the contours on the, on the upper
side, the contours are closely spaced, whereas, you move or leave this point, and move
towards this side, towards down, then, you have widely spaced contours. So, one contour
is here, another is here, and third one is here.
And the contour interval, what you see here is, you are having around 240, then you are
having, this one is less than that, and then, you have over here. So, the contour are, are
widely spaced. If you move towards the, this side, this marks the closely spaced contour.
So, this is, this indicates that, this is the hilly terrain, and this is more or less
flat surface. So, if you look at the, the boundary,
this is the boundary mark here, and this portion, the bold line, are indicate the active
fault, whereas, this one is indicative of the inferred fault lines, and this marks the
contact between the, the, the sub-Himalayas and
the Indo-Gangetic plane. So, this is the photograph of the same area,
where this channel, if you see, where I am moving
my cursor, this one is over here. So, this channel is this one here, and then, sorry,
this one is this channel, and this one is this channel
here. So, this contact or the, the meeting point is this one. So, the boundary, which
you see here, is between the Indo-Gangetic flat
area and the rugged terrain or the hilly terrain. So, one can easily make out, if you
have, or you, you, you study the topographic maps. So, this portion, you see an active
deformation signature. Of course, the fault continues here. So, this area is also under
deformation, but some signatures, which helps us in studying better the mountain fronts
and all that, and even one can classify that, this region or this portion is comparatively
deforming at the higher rate, as compared to this one. So, relative deformation can
also be identified. Then, comes the active front and inactive
front. So, these are inactive front, where you can see the boundary or the contact between,
is almost eroded, the front is eroded. But, if you have a very sharp contact and you have,
this is what, if you talk about, then this is the triangular facets. So, triangular facets
are also indicative of active front and the sharp boundary. So, sharp geomorphic boundary
between or contact between the, the, the hilly hills and the plain areas are indicative of
active fronts. So, this is active region in terms of tectonic deformation, whereas this
one is an inactive, where you see in, sort of, in subdued activity. Of course, there
is change in the elevation at this point and you
see the formation of alluvial fan. Similarly, over here also, but relative deformation,
if you look at, this is inactive and this is active, because this is much more sharp
and the terrain remains or you can say that, if the, the tectonic movement result into
regeneration of the terrain again and again and keep the terrain active or, or, or incision
will keep taking place and erosion is very fast as compared to this region.
So, again, if you see this satellite photograph, a very sharp front or the contact between
the, the stub Himalayas and the Indo-Gangetic plain and this is the area close to Chandigarh,
which shows the sharp front and this portion is the, one of the most active region in
Himalaya and that is your Himalayan front and the, the fault line which is been marked,
which marks the boundary between the Shivalik hills and the Indo-Gangetic plain is
termed as Himalayan frontal thrust. So, another signature, so what we have, we
usually do is that, try to identify the, the active features or tectonic geomorphology
based on the tectonic geomorphological studies, we try to identify the active features,
which are tectonically formed and marked and prepare a detailed map. So, what this
include is all the fluvial geomorphology. So, the, the, the color which have been marked
here of different are the terraces. So, different terraces, this is the oldest one, so much
higher terrace and then, you have the younger one as you move closer to the, the river channel
and all this are the parallel drainages here, this what you see is the dendritic drainage
and the contact between hills and the, the plain area.
So, this portion is the Indo-Gangetic plain and this are the hills and in between two
hills that is the, over here and here, you have
the dune valley. So, this is termed as inter-mountain valley. So, which is, which is lies
between the two mountain ranges and the, the line over here, which is been marked with
combs is indicative of active fault. So, this side is, this, this is, along this, the, the
terraces are displaced. So, one side has gone up, that is, this side has moved up at
compared to this one, this is an hanging wall and this is the foot wall. So, such fault
lines are been marked or weak zones on the, on the surface are marked based on the
displacement of the alluvial surfaces. So, terraces or the older flood plains are
displaced along the fault. So, again another signature. So, in the previous slide, if you
look at, then you have in this region, in particularly, what you see over here. So,
the drainage which is flowing, this, this is
the same drainage which takes turn here, this is the same drainage which takes turn here
and then you are having the major stream which is flowing, this is the same stream which
flows. So, the, this point, where the two channel meet is this one here on the satellite
photo. So, the fault which is been marked here, this one, the PGF, that is, Pinjore
Garden Fault, it runs through here, displacing the
older landform and this one is the older landform, which is marked by hatched surface.
So, this one is the older landform and if you see this, the, the morphology of the older
landform as compared to the younger one, which is been marked in pink, pink is the
Pinjore surface. Now, pink is younger one and this portion, which is been termed as
Kalka surface is the older and even on the satellite photograph, you can easily make
out that this portion of the surface, which is older Kalka surface, is much more
dissected as compared to the Pinjore surface, which you can see here and here, is less
dissected. So, this also tells us about the morphology of the surface, that the older
surfaces will be more dissected as compared to the younger surfaces. Why? Because the
older surfaces are subject to erosion, since long as compared to the younger surfaces
and the fault, which is marked here, this line is, it passes through this one here and
then go ahead and another fault, which is marked here, is this one. So, this sharp feature,
which you see is the, the fault, which is marked here, another one is over here.
So, the next photograph, you will see in the next slide, is the area from this region,
which shows this portion as an back tilt. So, if you see this one, this is the portion,
which I have marked and then you have multiple faults over here. So, these are all faults
or the tectonically formed landforms and this portion is having the back tilt on the, on
this, towards this side. So, it is uplifted along the fault, which passes through here
in this region and this is back tilted. So, the
arrow shows the location of faults or fault scarps, you can say. So, this side is down,
this side is up and the arrow shows the direction of tilting. So, this is back tilting and in
general, what is been seen is that most of the alluvial fans, which are formed at the
base of the mountain front, have the slope towards the, towards downstream, but this
is having the slope towards upstream, which is
usually not possible, but tectonic deformation can result into the development of such type
of slope, which is, we say back tilting. So, tilting towards in the opposite direction.
So, example of this in the field, the photograph was been taken from this bank to see the
back tilting, looking to this portion here. If you see, it is been shown in the next,
may be I have, I do not have the photograph right
now, but we can show it later on, but now coming to the mountain front sinusity, it
is the sinusity of topography of the mountain front
and the mountain front are defined as topographic excavations bounded by major faults.
So, as you, I was talking that mostly the mountain fronts, if they are the active fronts,
then the, the, the sinusity will be different and what, what type of sinusity one we can
see in the sharp fronts, we will, we will discuss very quickly and then, in the coming
slide or the next slide. So, it is the index of degree of irregularity.
So, if you are having sharper fronts, then the, then you will have less irregularity
or sinusity, but if you are having the highly
irregular fronts, then the erosion is more and that
area has remained quite for long period. So, it is the index of the degree of irregularity
sinusity along the base of the escarpment. Degree of sinusity of this fronts provide
an authentic and dependable evidence of active
tectonism in the arid and semi-arid areas, but this was also true when we looked at the,
the mountain fronts in the, the areas like Himalaya, which is very dynamic area in terms
of the erosion and all that. So, mountain front sinusity S is the ratio
of the observed length of, along the margin of the topographic mountain or the
Pidmont junction and so, this is the ratio observed length of the topographic mountain
front junction LMF to the overall straight length LS of the mountain front. So, based
on this, the ratio, if it is close to 1, then you can
easily say that the front is active. If it is higher values, then we can easily make
out that the, the front is inactive. So, this has
been given as S is equal to LMF. LMF is the length along the margin of the topographic
mountain Pidmont junction and the overall length LS. So, if you want to measure this,
this is the front here. So, this is the mountain front and the mountain front sinusity
is been taken as this one. So, this is your LS and this one is your LMF. So, ratio
between LMF and LS will give you the mountain front sinusity. So, mountain front
sinusity are defined as topographic escarpment bounded by major fault with measurable
relief exceeding 1 contour interval of 20 meters. So, you have the 20 meter contours
so close to the front. If it exceeds 1 contour interval of 20 meter, then you can
consider those as an mountain front. So, these values can be extracted from topographic
maps, but now, with an high resolution satellite data, one can easily extract such
mountain fronts from after digitizing the features on the satellite data itself and
one can calculate using GIS and all that. So, now the things have become much more easier
to identify the active front, but the straight identification or you can say the
preliminary identification, one can also do based on the morphology. So, if you are having
a very straight sharp front contact or geomorphic boundary between the hills and the
plains, you can easily mark at least at the initial stage that this area is active area
and tectonically active region. Now, coming to the mountain fronts or classification,
what you can see is that we can classify as an internal front, you can classify as an
external front. Depending upon whether they occur within the
mountainous terrain or they mark the physiographic boundary between the mountain
chain and the adjoining alluvial or the coastal plains. So, one can mark the internal and
the external fronts also. SMF value approaching 1 are considered to be most active fronts.
So, this is important which you can make out. So, this exercise, one can do it using
topographic maps and satellite data. So, if the mountain front sinuosity, if you take
LMF by LS, if the ratio is approaching towards 1, then they are the most active fronts as
compared to the relative or relatively adjoining fronts. So, the mountain front sinuosity
index SMF is equal to LMF by LS is a measure of the degree of irregularity or sinuosity
at the base of topographic escarpment, where LMF is the length along the topographic mountain
front and piedmont and LS is the straight length of the mountain front. The morphology
of the mountain front depends upon the degree of tectonic activity along the front. Active
fronts will show straight profile with lower values of SMF. So, that means that the values
are approaching towards 1. So, then those are active fronts and they will be very straight.
So, this you should remember. So, straight profile, lower values indicative of active
fronts and inactive fronts or less active fronts are marked by more irregular or eroded
profiles with higher SMF values. So, this is extremely important point which you should
remember and based on the ratio which you are getting, either if it is approaching 1,
then those are active and even if you see highly irregular fronts, so that indicates
more erosion. So, time which has been taken by the erosion activity by the drainages is
quite more. So, no tectonic movement has occurred. If the tectonic movement is taking place,
continuous ongoing deformation is there, those fronts will be more sharp and the values of
the mountain front is close to 1.
Now coming to the faceted again, this are close to the front. So, the facets are the
triangular to polyhedral shaped hill slopes that lies between two edges and drainages
along the mountain front escarpment. So, again if you are having a sharp front and you have
a triangular feature, so these are the, what it says that the facet triangular shaped hill
slope. So, triangular shaped hill slope, so this is a triangle over here, hill slope which
exists between the two adjacent drainages. So, one drainage is flowing here, another
drainage is flowing here. So, between the two adjacent drainages along the mountain
front escarpment are termed as triangular facets. So, tectonically active fronts display
prominent as been shown here in this picture or the satellite image, large facets that
are generated by recurrent faultings are been seen. That means the front are less dissected.
So, they are less dissected. If the dissection is more, that means it is more erosion is
taking place and they are less active. So, less tectonically active fronts contain fewer
and smaller facets, means more dissection of the front because of the development of
more drainage across the front. So, this is another parameter based on which one can identify
the tectonic movement or this is the one of the important parameters of tectonic geomorphology
based on which one can talk about the tectonic movement in the region.
Now, if you see the triangular facets, this is from Himalayas. So, you, these are the
all triangular facets which have been marked along the front of main boundary thrust and
this hills which you see is of lesser Himalayas and the foreground here is the dune valley
or the inter mountain valley and the contact is been marked here by very sharp fronts
in the region. So, view of lower Shivalik's ranges showing well developed triangular facets.
So, triangular facets, one can also talk about the left and side and right hand side. So,
percentage of faceting along the mountain front can be the left, you can, this is the
faceting index. So, more erodibility, so, one can talk about the facet that is L f by
L s. So, if you measure the distance between the left front and the right front and then
the area which is eroded in between, so, that will give you the percentage of faceting along
the mountain front. So, this data again can be generated where you have marked the mountain
fronts. So, mountain fronts, same data you can use and calculate the percentage of faceting
along the front. Active tectonic and river morphology, so, we can stop here and continue
in the next lecture.