TypesofInstruments RoleofInstrumentsinMeasurementSystems ApplicationsofMeasurementSystems ElementsofageneralizedMeasurementSystem To access the translated content: 1. The translated content of this course is available in regional languages. For details please visit https://nptel.ac.in/translation The video course content can be accessed in the form of regional language text transcripts, books which can be accessed under downloads of each course, subtitles in the video and Video Text Track below the video. Your feedback is highly appreciated. Kindly fill this form https://forms.gle/XFZhSnHsCLML2LXA6 2. Regional language subtitles available for this course To watch the subtitles in regional languages: 1. Click on the lecture under Course Details. 2. Play the video. 3. Now click on the Settings icon and a list of features will display 4. From that select the option Subtitles/CC. 5. Now select the Language from the available languages to read the subtitle in the regional language.
Welcome to the course on Metrology and Measurement.
So, today we will see the application of measured system.
Every application of the measurement including those not yet invented can be put in one of
these three categories.
One is monitoring of the process and operation, two control of the process and operation and
three experimentally engineering analysis.
So, within these three only all these measured system finds its application.
What is monitoring of a process and operation?
Here the measured device is used for keep track of some quantities monitored.
So, you keep for example, you keep on monitoring the temperature, you keep on monitoring the
rainfall, you keep on monitoring the humidity.
So, measure here the measuring device is used to keep track of some quantity.
Certain applications of the measuring instrument may be characterized as having essentially
a monitoring function.
It can be temperature, it can be barometer pressure, water, gas, electric meter, automotive
speedometer and fuel gauge and compass.
So, all these things are used for monitoring the process and operation.
For example, here this is monitoring I was talking to you about a fuel.
So, this way you can see beautiful things have come.
So, see here it clearly says if the level is less than certain amount, so it gives you
a red alert and then says it is moving towards empty, ok.
Here it says it is black and safe and what is this E and F. So, until you if you do not
put the center image, if this image is not there, so this E and F does not make any sense.
So, moment you have this center image made, then by looking at the symbol, people understand
ok this looks like a petrol pump.
So, the entire device is indicating the level of fuel present in the vehicle and what it
does?
It only monitors how much it is getting sunk over a period of time.
Today interestingly you have also digital displays from the mileage, from the reduction
in the fuel consumption and the distance measured.
It tries to display the mileage for every litre or every whatever it is, every graduation.
It tries to tell what is the mileage it has travelled and it tries to convert this into
for one litre what is the distance travelled in this vehicle.
So, this will try to talk about the process or the automobile.
When you have, when you put in the other category of control of processes and operations,
it is one of the most important class of measurement applications.
Here sensor are used in feedback control systems, controlling of the process right.
So, how, when do you control?
You have an experiment going on, you measure the using sensors, you measure what is going
on.
These are measuring systems, get the output and then come back and correct the experiment
such that you get a good output.
Sensors are used in feedback.
Sensors are used in feedback control systems and many measure, measurement systems themselves
use feedback principles in their operation.
Sensors are used in feedback systems and feedback systems are used in sensors.
So, both can be used, very important point.
So, an instrument can serve as a component of control system.
To control any variable in the feedback control system, it is first necessary to measure it.
Every feedback control system will have at least one measuring device as a vital component.
Then the signal control system may require information from many measuring instruments.
So, industrial machine and process control, this is used in cement industry, sugarcane
industry, sugar industry, aircraft control systems.
Here also there are several sensors around the plane, they look at all the conditions
and then they try to control the system to get the output.
Automotive control systems, all these things are available today.
So, when we talk about different control process and operations in terms of automobile, you
can see headlight, range, chassis level sensor, motor position sensor, differential non-contact
angular sensor, combo sensor for steering, throttle position for fuel flow, HVAC sensor,
then steering sensor, then fuel level sensor, wheel speed monitoring, mirror sensors, acceleration
pedals and transmission systems.
Today what has happened, all these sensors are placed inside an automobile and then these
sensors first measure the required quantity and then what they do is, they try to control
certain quantity to get the best mileage or a comfortable ride.
So, here this is control of process and operation.
So, if we want to talk little bit more of control of process and automation, let me
make a schematic diagram.
So, we have this is the reference signal input and then we have a control algorithm, then
we have an actuation actuator, then we have a plant, this is nothing but feedback signal.
So, this is a control system and here is a feedback signal.
So, if you see the control of a process, this is how it is, reference input is given.
So, here there is a error signal which is error, signal which is generated and then
this is taken to the control algorithm, control algorithm does the modification or understands
what is it, then it actuates.
What is an actuator?
Actuator is just a change of certain variables or parameters which are involved.
So, an actuator comes.
So, these actuators do the job after going through the control algorithm, then this is
given information to the plant and plant starts working as per the control algorithms error
signal, whatever it is getting generated, it works and then it produces an output.
Now, what we see is, we take the output and then we take it as a feedback signal, give
it to the sensor and then ask the sensor to understand what is going on and that is
error signal is given.
If you want to put it in crude terms, you have a error signal, there is a process which
is going on, then the output is taken and then this output is brought back and then
it is compared, then the error signal is given.
So, accordingly the process is monitored.
So, the output parameter, the output can be even a shaft which is machined, the product
which comes out of a bread which is coming out of a bakery microwave oven, pizza coming
out of a oven, it can be there or a finger chips coming out.
So, all are processed.
So, after the process is over, so the output comes.
Now, the output is measured and then if there are corrections to be made, immediately it
sends the output, whatever is it, it measures the output and gives it back and then in the
comparator it checks the value, then error signal, corrections made, so it keeps on continuing.
So, this is generally the measured value is used to control the process.
Experimental engineering analysis.
In solving engineering problems, two general methods are available, theoretical and experimental.
Many problems require the application of both methods and theory and experiment should
be thought of an as an complementary to each other.
What we are trying to say is in engineering analysis, we do theory.
Theory is we mathematically solve the problem or we do simulation and understand the process
completely.
After understanding the process, whatever we have understood, we execute it in the experiment
and see whether it is coming.
So, here this is the experimental engineering analysis where the application of measuring
systems come in a big way.
So, what are the features of a theoretical method?
This is often, this often gives the result that are general use rather than a restricted
application.
It gives, for example, you have speed, feed, depth of cut in a lathe machine.
We know feed plays an important role followed by may be a depth of cut, may then followed
by cutting speed.
So, this relationship is known, I am just giving you an example, this relationship is
known.
So, the magnitude of individual responses depends upon tool-work-piece interaction,
right.
So, the general use is given by the theory, but when I try to take the general use and
tweak it to my requirements, so then that is customization happening.
So, features of theoretical method is a general understanding is given.
So, for example, Ra is directly proportion to V, F and D in a lathe machine.
So, now you can, the theoretical one can even come out with a formula saying that this is
first, this is the major influence, this is the second and this is a third.
So, this general is given, but what value of V, what value of F and what value of D
you have to choose such that you get a better Ra, that should come from the experiment.
So, invariable requires the application of simplified assumptions.
See, in manufacturing, there are only three parameters, they are pressure, time and temperature.
These are the three parameters.
So, there are processes where only one is involved, there are processes where two process
variables are involved, there are where all the three is involved.
When more than one variable is involved, we do not know exactly what is the weightage
of individual parameters.
If we know the exact weightage, then we can quickly go do manufacturing modeling, process
modeling of any process, but this is very a trickier situation.
So, what we generally do is, we make lot of assumptions.
So, this assumptions tries to generalize the model.
So, moment we generalize, what we get an output is a generic output.
The theoretical predicted behavior is always different from the real time.
So, generally suppose you try to take a material removal rate, this will be the theoretical
response.
Your experimental response can be something like this, this can be experimental response,
this can be theory.
Why theory, it is almost a straight line because you have made assumptions and the model is
made in such a fashion such that it always leads you to the theoretical one.
So, when we do in real time experiments, there is always an error.
The theoretical prediction behavior is always different from a real time behavior as simplified
physical mathematical models because many a times to simplify the model and working
of some manufacturing process, we try to take the variable relationship as linear.
So, it is studied rather than the actual physical system.
In some cases, it may lead to complicated mathematical problems.
So, for example, if we want to do a laser simulation, laser welding or laser hole making
process simulation, it is extremely difficult.
Why?
Because you are supposed to take heat, you are supposed, first is heat, you are supposed
to take material property and you are also supposed to take a time dependent variable
for this.
It is a very complicated process.
So, in some cases, it may lead to complicated mathematical modeling.
Sometimes, it requires only pen, pencil, computer, etcetera, but extensive facilities, it is
not necessary for theoretical one.
So, the time, no time delay engendered in building modeling and assembly is all there.
So, when we talk about features of experimental modeling, it is often, it often gives the
results that apply only to a specific system.
That is what I said, if you remember in the previous lecture, empirical modeling, ok.
The specific system being tested, however, the techniques can be dimensional analysis
may allow some generalization.
So, but here what happens in the experiments, the true behavior is realized.
The accurate measurement, a measurement necessary to give a true picture, it, the experiments
are always expensive and the device what you want, it is complicated in nature.
So, it is considerable time is required for designing construction and debugging the apparatus
before doing the final version of it.
So, here is a instrument, which is, here is a shaft, which is a cam shaft.
You can see, these are cams 1, 2, 3, 4, 5, 6, 7 and 8.
It is a cam shaft, cam shaft with may be 8 cams.
Cams are always given for timer, it is something like a timer, a timely release of fluid or
whatever it is.
So, it is there.
So, here it, all these cams are attached to a shaft or it is a integral part of a shaft.
So, now, what is happening, you can see, these are the areas where it will be in contact,
it will be in contact with the housing or some place.
So, we are trying to measure the individual values, ok.
This is done on a CMO machine, coordinate measuring machine and here is a stylus.
The stylus comes in contact with it.
So, we try to get a digital display of the value at any given point of time.
So, the elements of generalized measured system, it is desirable to describe both the operation
and performance of measuring instrument and associated equipments in a generalized way
without recourse of specific hardware.
So, what we are trying to say here is, whenever we try to give requirements for developing
a measuring system, we should try to make it very generic.
So, it is desirable to describe both the operation.
That means to say, rather than saying, please give me that X instrument, you say that, so
here is a, here is a part which is manufactured in, which is manufactured and this undergoes
these, these, these operations and this is what is the criticality of this part in terms
of performance.
For this, I would like to design or I would like to have, I would need an instrument.
So, it is very, it clearly describes to the opponent person or the next person, what instruments
to pick, rather than exactly saying, please give me that.
So, it is describe, it is desirable to describe both the operation, how the manufacturing
and the performance of the measuring instrument and associated equipments in a generalized
way rather than specific.
Here we focus on operations which can be described in terms of functional elements of an instrument
or the instrument system.
So, we should try to say, here is an instrument which has to do this, this, this, this, this
measurement.
We should not talk about what should be the shape, size, how does it look like, all those
things.
We have to say, what is the functions which, which should be there in the system and what
should be the functions it should measure.
By concentrating on these functions and various physical devices and the various physical
device available for accomplishing them, we develop our ability to synthesize new combination
of instruments.
For example, you can say a dial gauge is required or you say that, here is a component which
is something like this to measure.
So, what I will do is, I cannot measure the internal of these grooves and all.
So, what I will do, I will try to say, please give me a vernier, please give me a device
where it can measure the radius.
So, here what I am doing is, I am trying to split into various functions and then I am
trying to assimilate these functions, try to develop my own device for the requirement.
So, when we talk about the elements of generalized measuring system, so, it will be like this.
So, you will have measuring quantity, then you will have primary sensing element, measure
it.
And then what we have is, we will have variable conversion element, then we will try to have
variable manipulation, manipulation on element, then we will have data acquisition, data transmission
and then what we do is, data presentation system.
So, if you see here, these are the different elements which are present in a generalized
measuring system.
So, first we will have a measuring quantity.
So, we will have a primary sensor to measure and then this primary sensor elements whatever
is there, then it is sent to a variable conversion element.
So, we will try to convert some of the primary data into a secondary data, then what we do
is, we try to take those conversion data, variable manipulation of elements we try
to do and then what we try to do is, we try to have a data transmission system.
This data transmission system communicates to a data storage and then the signal is further
sent to data presentation system.
It without going to the data storage, it can directly come to the presentation or it can
go to store.
So, that means to say, I am measuring a data, then I am trying to convert the data and then
trying to develop manipulation for the elements and then I am trying to record the, I am trying
to take the final data in my hand and that data can be used for displaying presentation
systems directly.
So, what are the primary elements?
These are the elements that first receive energy from the measured media and produce
an output depending in some way of the measured quantity.
The output is some physical variable example, it can be displacement and voltage.
An instrument always extracts some energy from the measured media.
The measured quantity is always disturbed by the art of measurement, which makes a perfect
measurement theoretically impossible.
Good instruments are designed to minimize the load effect.
For example, this is a primary device.
So, this is a primary sensing device, ok.
So, here is a fitting, so here is a connecting head, ok.
This can be, this is a protecting tube, then sensing.
This can be an LVDT or this can be a sensor which is used for detecting gas, whatever
it is, right.
So, here if you see that, so this is a connecting head, connecting head, connecting head to
a fitting.
So, here this is a, till this it will be an independent, this will be one part, part 1
and this will be part 2 and here depending upon the sensitivity, these devices can be
changed.
For example, the protecting tube can be changed, the sensing element, whatever it is there,
this can be changed, so that we try to get the data more accurate.
The variable conversion elements, so I am trying to take individual block diagram and
I am trying to tell primary variable, I am trying to talk about various block diagrams.
It may be necessary to convert the output signal of the primary sensing element to another
more suitable variable.
So, instead of trying to take only displacement, I try to convert this into a voltage parameter.
It has a function also to preserve the information content in the original form.
So, it is always like that displacement, you always convert it into a voltage signal, so
that this voltage can be used for other measurements.
So, variable conversion element if you see, these are pressure inputs and you can see
this is a supporting thing, here is a coiled spring, this when it tries to push, this will
pointer will try to move.
So, this is, this displacement is converted into this motion.
So, then the data presentation element, if the information about the measured quantity
is to be, is to be computerized or it is to be stored somewhere, so then is to, human
sense, it is always there.
Then this communicated to the human being for monitoring, control and analysis process,
it must be put into a form of recognizable, but one of the element performs the translation
function.
So, the data presentation element tries to convert the data in and helps us to understand
what is it.
So, the data presentation element can be like a CRO, which is there for example, you had
a circuit, a power supply.
So, the power supply had and then this is attached to a machine.
So, the power supply gave some data to the machine, voltage it gave, current it gave,
so voltage and current signals have been given.
So, now what I do is, I tried after the, this thing, machine to measure the voltage same
and then I, voltage and current parameters to find out the load, what is there or resistance,
what is the getting developed.
So, then this signal, I wanted to connect it to an oscilloscope, CRO and see the displacement
to see that the data presentation, which is happening in a CRO.
So, this is a, it can be called as a TV or it can be a CRO, which is used to see the
displacement.
So, primary, so first we saw primary, so then we saw primary element system, then variable
conversion system, I gave an example, then the data presentation happens in a CRO.
So, in this lecture, so what all did we see, we saw various types of instruments, then
the role of instruments in measurements, then what are the different types of applications
of measurement and what are the different elements of a generalized measuring system.
So, task for students, so let us take two tasks.
So, first task is, let us take a speedometer, speedometer is a device, which is used to
measure the speed, which is used or we can call it as odometer, odometer, which is used
in bikes.
So, basically you will have a wheel, which rotates at some rpm, it rotates at some rpm
and this data is getting converted on the screen, you will see kilometers, you will
see kilometers and then this in turn is linked with a mileage, mileage showing device or
mileage device.
So, again here it is a data.
So, now what I want you guys to see is, how is the data of rpm getting converted finally
into a mileage data.
So, here if you see, we talk about distance.
So, a single measured data is converted into some other data form and this data is used
to find out the mileage and here you also need an input of fuel consumption.
So, again here you have a device, which is showing the fuel indicator.
So, this data has also to be linked with this and you will have to get that data and here
please understand, does it look for volume, does it look for distance, that means to say
height of the tank, what, how does this fuel indicator measure the level of the fuel.
So, please try to understand and now you see varying data points, you get varying measurements.
So, for measuring individual physical parameters, you have varying measurement devices.
These devices will have varying units and they do single or that is primary or secondary
data is taken and then it is processed and then you can see multiple sensors also getting
linked.
The next thing what I want you guys to look at it is, please look at a medical device,
biomedical device, where in which you can see in an oscilloscope or in a monitor, you
see the data which is getting displayed.
This can be a temperature data, this can be the oxygen content data, this whatever it
is, this can be your ECG data, whatever it is, you see look at it.
So, how are these, see you have a human body, from here you have different sensors, all
these sensors are pre-processed or processed and then you get the data displayed and this
data you can read as well as record this data for patient to understand the patient history.
Try to look at this real time application.
So, here you will see patient is monitored through multiple sensors and these sensors
whatever it is, the data is getting displayed and then this data is in turn recorded and
retrieved when as and when it is required.
Please try to look at these two examples what I have given here, how measurements are important,
how different, different measurements sensors are involved to get a different data for processing.
So, with this we will come to an end of this lecture.
Thank you.