Lecture: 21

IIT Kanpur July 201
20 followers
1 Video View·Dec 1, 2023
Welcome to the 5th week of our course on Basic Electrical Circuits. So, in this week basically
we will talk about the first order and second order circuits and particularly today we will
talk about the first order RC circuit. So, let us see what do you mean by first order
RC circuit. So, before going into the RC circuit particularly let us understand what
is the meaning of first order circuit. So, what we will do in the first order circuit
we will discuss about two types of simple circuits which are comprising of a resistor
and capacitor and a circuit which is comprising of a resistor and inductor.
So, these are typically called as RC and RL circuits. Now, the analysis of these RC
and RL circuits are is done by applying the Kirchhoff's law as we did for the resistive
circuit. Now, applying Kirchhoff's law to a purely resistive circuit is simple because
it gives an algebraic equation which is easier to solve. Now, when we apply the same law
for RC and RL circuits it produces differential equation. So, it would be little bit difficult
to solve when compared with the algebraic equation which we get when we solve the resistive
circuit using Kirchhoff's law. Now, the differential equations resulting
from analyzing the RC and RL circuits are of the first order. So, that is why we call
these type of circuits as first order circuit. So, we can say that first order circuit is
characterized by a first order differential equation. So, wherever you see that there
is a first order differentials equation coming then we can say this is our first order circuit.
Now, we have two ways to excite these first order circuits. The first way is that we will
excite the circuit by using initial conditions of the storage elements in the circuit. So,
that means that initially if you charge either capacitor or inductor and insert that charged
capacitor and the inductor into the circuit, then the circuit will have only the source
of energy as the total energy stored in either capacitor or inductor. So, there will not
be any external voltage or current source to provide the energy. So, these type of circuits
are called source free circuits because we do not have any external source available
in that circuit. We have the capacitor and inductor available in the circuit which has
some initial energy stored. So, we assume that energy is initially stored
in those elements and this energy will cause current to flow in the circuit and gradually
it will dissipate in the resistors because when we talk about R C or R L circuit we have
either whether we have capacitor or inductor we will have resistor either in series or
parallel in the circuit. So, that means that the resistive component would be responsible
to gradually dissipating the energy which was previously stored in the capacitor or
inductor. So, it is although source free circuit that means it is free of independent sources,
but there may be some dependent sources. So, the second way is that you excite the
first order circuit by independent source. So, we have the first case where you do not
have any source called as a source free circuit. Here the second is you excite the first order
circuit by applying an independent source. So, now first let us try to understand what
do you mean by source free R C circuit. Source free R C circuit means we do not have any
external voltage or current source connected to the circuit. So, that is why it is source
free. So, what how we can realize it the source free R C circuit will occur when a DC source
is suddenly disconnected. So, suppose if you have a voltage source here
connected through some switch. So, you have a voltage source here that may be some voltage
V, what we have done? We have initially connected this the switch and then after some time suddenly
we have disconnected this particular switch. So, what will happen in that case when we
apply voltage across capacitor? Capacitor will get charged and the energy would be stored
and when we disconnect the circuit would be like this as shown in the figure.
So, now let us consider the series combination of resistor and it is initially charged means
energy is stored in the capacitor. So, we will see that how the energy is stored in
the capacitor will be released through the resistor which is there in the circuit. So,
now you will see that the figure which is shown in this ah slide the resistor and capacitor
we have ah we are seeing here as a single one, but it can be equivalent resistance or
equivalence capacitance of the combination of resistors and capacitors .
So, if you have multiple capacitors, multiple resistors in the circuit you can club all
of them and create an equivalent RC circuit. So, where C and R can be considered as an
equivalent capacitance and equivalent resistance. Now, what we have to do? We have to find out
the circuit response. Circuit response means the manner in which the circuit will react
when the energy stored in the element which is capacitor in this case is released.
So, let us see how the ah performance of the circuit would be when you have the capacitor
initially charged and connected to the resistor in parallel. So, what will happen in this
case since capacitor is initially charged. So, we can assume that suppose at time t is
equal to 0 the capacitor was having some initial voltage say v naught. So, this ah initial
voltage you will see which is there across the capacitor at time t is equal to 0 right.
So, the value of energy which would be stored in the capacitor would be half of C v naught
square. Now, we will know that when we see this particular circuit there would be one
loop. And if you apply case of current law at this particular node what you will get?
You will get simply I c plus I R equal to 0. So, you can write using KCL I c plus I
R is equal to 0. Now, what is I c? As you know that current
which is flowing through the capacitor is nothing, but C multiplied by dv by dt voltage
is time dependent. So, I c is C dv by dt and resistor R is nothing, but any voltage v across
the resistor divided by the value of resistor. So, at any time t we can say the voltage across
the resistor or voltage across the capacitor because these two are in parallel. So, voltage
will remain same across both of the elements the value of voltage is say v.
So, what we have to do? We have to put the values of I c and I R in the in the equation
we will get C dv by dt plus v by R equal to 0. Now, this is our first order differential
equation. So, why we will say is first order differential equation because only first derivative
of voltage v is involved. So, now, what we have to do? We have to rearrange the terms.
So, when we rearrange you can simply write dv upon v is equal to minus 1 by R c dt. So,
this is the equation if you rearrange you can simply write them as dv by v is equal
to minus 1 by R c dt. Now, next task what we have to do is integrate
at both sides. So, when we integrate with respect to t at this side and with respect
to v at this side what we will get? This will be the integration of this would be ln v minus
1 by R c is anyway the constant component. So, it will become minus t by R c after integration
plus some constant term. So, in this case for simplicity we will assume
that the constant term is ln a where a is the integration constant. So, what we can
write? We can simply write the above equation as ln v when you keep the ln components together
it will become ln v by a is equal to minus t by R c. So, next task what we have to do?
We have to take powers of e on both side that is exponent. So, if you take power of
e on both sides. So, e to the power ln v by a will become simply v by a and you will get
the this component as equal to minus t by R c. So, you can simply write v is equal to
a into e to the power minus t by R c. Now, we assume that as per initial condition when
v is equal to 0 is voltage v naught. So, that means, the value of a will be v naught. So,
we put the value of a here and we get the voltage v as v naught e to the power minus
t by R c. So, here you will see that the voltage across both of the components v whether
it is capacitor or resistor is a time varying component. So, this shows that the voltage
response of R c circuit is exponential decay of initial voltage.
Now, since the response is due to the initial energy stored and physical characteristic
of the circuit. So, this will not be due to any other external voltage or current source
this is simply termed as natural response of the circuit. So, when we say that there
is no external source connected to the circuit and the internal energy is dissipated the
response of the circuit is called natural response of the circuit. So, we can simply
say that natural response of the circuit refers to the behavior that will be in terms of voltage
and current of the circuit itself with no external sources of excitation.
Now, how you will represent it graphically when you represent the natural response graphically
it will be like as shown in the figure below. So, here you will see when you have the component
v t is equal to v naught e to the power minus t by R c. So, let us assume that the there
is another component called time constant and it is denoted by lower case Greek letter
say as tau. So, let us say that this time constant tau is nothing, but the value of
R into c. So, if you put the value of tau in the circuit the voltage v will become v
naught into e to the power minus t by tau. So, when you plot the this particular function
with respect to time what you will see that it is exponentially decaying. So, when you
see it is decaying when we take the time t is equal to 0 we know that the initial value
of voltage was v naught and then after that because of this factor it is decaying and
eventually the all energy would be dissipated in the register.
So, when we say t is equal to 0 we say it is a initial condition. So, the natural response
depends on the nature of the circuit alone with no external sources. In fact, circuit
has a response only because of the energy initially stored in the capacitor. So, the
natural response will have only the internal energy to be dissipated in the circuit.
Now one important thing which we have to know that when time t is equal to tau that means,
if you replace t with tau this would simply become e to the power minus 1. So, at that
particular point of time the value of v naught would be minus 0.368 v naught. Now what does
it mean let us see. So, when we say that the time t is equal to time constant tau the response
will decay by a factor of 1 by e that is e to the power minus 1 it means that it will
decay by 36.8 percent of its initial value. So, when we simplify by replacing R c as
t is equal to tau we get this value. We say that when we represent tau in the circuit
v naught v t will become v naught into e to the power minus t by tau.
So, if you plot the value of v t by v naught. So, that is if you take v naught by in denominator.
So, this will become v t by v naught is equal to e to the power minus t by tau. So, what
we will do we will plot this value with respect to time t and let us take time t as a multiple
of tau that is the time constant. So, if you compare you will come to know that after
5 tau that means, after 5 time constants the value of voltage v t is less than 1 percent.
So, what we can say that the capacitor is fully discharged or alternatively you can
say it is fully charged after 5 time constant. So, means it takes 5 tau for the circuit to
reach its final state or a steady state when no changes take place with time. So, every
time interval of tau the voltage is reduced by 36.8 percent of its previous value.
So, this you can see from ah this particular table also that the every increment of time
ah equal to tau the value of the voltage would reduce by 36.8 percent of its previous value
why because when you say v t plus tau that means, that it is simply v t by e. So, if
you keep on changing the value of t this will always be equal to 36.8 percent of v
t. So, this would be regardless of any value
of t. So, if you put the value of t ah as tau 2 tau or 3 tau you will see that whatever
the value you get is 36.8 percent of its previous value. Now a smaller the time constant more
rapidly the voltage will decrease so that means, that you have faster time response
of the R C circuit. So, if you see this particular figure when
time constant is small that tau that is nothing, but R C the product of R and C if it is small
the slope of the curve shows that the voltage is decaying very fast as compared to others
and we have tau larger then you will see slow response of the circuit. So, we can say that
a small time constant will give us a fast response and it will reach the steady state
quickly whereas, when we have last time constant it will give slow response because it takes
longer time to reach to its steady state value. Now at any rate whether it is time constant
is small or large circuit will reach at its steady state in 5 time constant because in
5 time constants voltage value will decrease to less than 1 percent of its initial value.
So, the value of time constant is small or large will not impact the steady state time
it will always be 5 times of the time constant. So, from time perspective when time constant
is large the more time the system will take to reach its steady state value when time
constant is small means 5 into time constant would be small in that case and the circuit
will reach to steady state value quickly. Now using voltage V t we can find the current
how we will find the current you can simply write current I which is flowing across the
resistance R is nothing, but the voltage across resistor that was V naught into e to the power
minus t by tau divided by the resistor R. Now if power dissipated in the resistor is
P at particular time t then the instantaneous power would be V into I R and this would be
V is V naught square by R e to the power minus 2 t by tau.
So, for V we will have V naught into e to the power minus t by tau for I R again we
will have V naught by R e to the power minus t by tau. So, we will have 2 components of
e to the power minus t by tau that is why it has become e to the power minus 2 times
of t by tau. Now the energy absorbed by the resistor up to a particular time say t can
be given as the integral of P dt between 0 to t. So, if you integrate this what you will
get you will get 1 by 2 C V naught square 1 minus e to the power minus t by tau.
So, how you got C because you will have tau component coming here and R will you can replace
tau as C into R then R and the R in the numerator will be cancelled out you will finally, get
half C V naught square into 1 minus e to the power minus 2 t by. Now if you see this
equation when you say that at time t is equal to infinity this term will become 0. So, this
will become half C V naught square. So, you say that when time goes to infinity
energy dissipated in the resistor would be half C V naught square. So, that energy is
nothing but the initial energy which was stored in the capacitor. So, we will say that the
total energy which was there in the capacitor is discharged in the resistor in time that
is infinity. So, it will take infinitely longer time to finally, dissipate energy completely
from which is available in the capacitor. Now there are two important point to remember
when we work on the source free R C circuit one is that find the initial voltage V naught.
So, that means, at time t is equal to 0 what would be the value of initial voltage across
the capacitor and then find the value of time constant tau when we get these two values
we can simply use the ah equation which we derived that is for I R it is V naught by
R e to the power minus t by tau and find the various ah parameters like voltage or current
in the circuit. So, the time constant is the same regardless
of what output is defined to be. So, in finding the time constant tau that is equal to R C
R is often the Thevenin equivalent resistance. So, when you have given the larger circuit
and you want to find out the circuit response you can simply use the Thevenin theorem and
R would be simply a Thevenin equivalent resistance at the terminal of capacitor. So, that means,
that if you take out the capacitor and find the value of Thevenin resistance that would
be sufficient to find the time response of the circuit.
Let us now understand the concept with the help of one example. So, that you can understand
the concept clearly. If you see this particular figure in this figure let the initial voltage
across capacitor is 15 volt. So, what we have to do we have to find the value of V c V x
and I x for time t greater than 0. So, any time t greater than 0 we have to find out
the value of V c V x and I x in terms of time t. So, what you will do first you will
find the equivalent resistance or you can say the Thevenin resistance at the capacitor
terminal and then we will obtain the capacitor voltage V c and then from V c we will determine
the value of V x and I x. Now, 8 ohm and 12 ohm registers are in series
and this combination is in parallel with 5 ohm resistance. So, if you if you see these
two terminals and find out the Thevenin equivalent resistance across these two terminals you
will simply see that these the series combination of these two is in parallel with 5 ohm resistance.
So, equivalent resistance or you can say Thevenin resistance would be 20 that is the
12 plus 8 that is 20 into 5 divided by 20 plus 5. So, you get finally, the Thevenin
equivalent resistance or you can say R equivalent is 4 ohm. So, now finally, the R equivalent
that is 4 ohm is connected in parallel with 0.1 Farad capacitor having initial voltage
as 15 volt. So, first what you have to do we have been
given the initial condition next we have to find out the value of time constant. So, time
constant is nothing, but the equivalent resistance R into c. So, you get time constant at as
0.4 second. So, next what we have to do we can just simply put the value of tau and initial
voltage V naught in the equation and we get the value of voltage across the capacitor
at any time t is nothing, but 15 into e to the power minus 2.5 t.
Now, you can use voltage division to get the voltage V x what is voltage V x that is voltage
across 12 ohm resistance. So, when you use the voltage division you will simply get V
x is nothing, but 12 divided by 12 plus 8 12 plus 8 are in series. So, voltage across
these will be 12 divided by 12 plus 8 into V. So, you simply get V x is 9 into e to the
power minus 2.5 t volt. So, finally, you can find the value of current
flowing through the resistance that is 12 ohm resistance here that would be V x by 12
and you will get value of current I x as 0.75 e to the power minus 2.5 t ampere. So, with
this we close our today's session. In this session we discussed about the natural response
of R-C circuit and in next session we will discuss about the natural response of R-L
circuit. Thank you.
.
