Hola qué tal! Hoy te comparto un video donde te explico y enseño POR QUÉ SIENTES QUE TE QUEMA TU LAMPARA DE UÑAS o tu cabina de uñas. Te explico CÓMO SOLUCIONARLO DE DOS FORMAS MUY SENCILLAS DE REALIZAR GRACIAS AL PRECURADO. Espero que te guste mucho y te sirvan éstos consejos, no olvides suscribirte para más contenido al igual que activar la campanita de notificaciones para que no te pierdas de nada :D Te dejo mis redes sociales para que vayas y las cheques :) Te quiero mucho y nos vemos en el próximo video.
[Music]
Hello, how are you, welcome once again to
another video, I am Jessica Alba. I am
very glad that you are here and if
you are watching this video, it is because
unfortunately you have gone through this
situation where you or your client. When
you cure the product in
the lamp, you feel a very strong burning sensation because
the product has heated up and is hurting you. I am
going to explain to you in this video why
it happens and I am also going to teach you how to
avoid it in some super simple ways.
So If this video helps you and you
like it, please give me your thumbs
up, it's completely free, you're going to
help me a lot and I invite you to
subscribe to my channel, which is also
free, and activate the
notification bell so you don't miss
any content Now Yes, let's
start
Now I can give you the explanation with
a lot of technicalities But I prefer to
do it in a super simple way so
that we can all understand Why
this happens and how to avoid it So
why do I feel like my lamp is burning
When I put my lamp in? hand with
nail product The answer is very simple, we
must remember that our lamp or
our cabin works with a light that
is heated, necessary to be able to dry or
cure all these products here,
products such as
construction gel, solid gel to shape
the top Coat the matte top the base the
enamels whether with decoration or with
effects it doesn't matter or even the
acri gel or poly gel all these
products can make you
feel that burning sensation if
you cure it in the wrong way
So if our lamp A
special heat to dry these products you
feel that burning sensation
because you are placing too much product in the first place I
always repeat that
please apply thin layers
of Top base polish or any
product you are going to use this It will
also help to prevent
the product from coming off, inflating, and creasing,
also avoiding this
burning sensation. But what about these
products where it is necessary or
required to place a lot of product, how am I going
to prevent it from having that
very burning sensation? simple, we are going to have to
do a pre-cure and there are two
different ways to achieve a pre-cure.
So we are going to go in parts. I am going to
explain to you how to do this pre-cure. I am going
to stay here with these products, which
are the ones with which
this burn situation frequently occurs. When it comes time to
put the lamp in,
I'm going to take this sample book and I
'm only going to put a small
portion of the product here, I'm not even going to
shape it, it's just so we can see
what this will be like,
so here I already have a small
portion of the product that If we look at it from
the side we can notice that it is
quite thick. So if I
put this on my nail I will feel that
burning sensation. Why
first because it would be in
direct contact with my natural nail this
would cause me to feel that sensation
that It burns me but if it is necessary for
you to apply this thick amount of
product, how are we going to make it very
simple? First of all, I want you to
go check your lamp and look
very carefully if it has this slow drying button.
Normally, most
lamps are By having this
specific button you will have the
10 second drying button, 30 second drying,
60 Second drying button and you can
have this one but since it is a
slow drying mode what it will be doing
is that the light bulbs of your The lamp is going to
start to light up little by little.
So I want you to pay close
attention to how
these light bulbs are going to light up with the slow drying mode.
There they are. Now I want you to pay close
attention to how the intensity is going to change.
When I turn on the light. normal drying you
could notice This change I am going to do it
again you
notice how the power is less now I
am going to do it one more time so that you
can identify This change
there you have it
using this way of slow drying
you can avoid this
burning sensation you can place the amount
of acri gel construction gel
or even molding gel that you want and
you will not feel that
burning sensation now what is the other way to
do a very simple pre-curing if your
lamp does not have this
Slow drying mode no Don't worry, you can
do a pre-cure by doing it this
way, you are going to press the drying button
that you need, for example, we are going to
try for 30 seconds, so I am going to
press the 30-second button,
but I am not going to put it directly into the lamp, I am
just going to do it. Let's leave it out
here at this point
Okay, I'm going to press the 30
second button and I'm going to leave it out here
so that the light from the lamp AND the
indirect heat are doing this pre-curing
and the force of the lamp is not
directly present. on the product and it is
making that burning sensation
once you have finished the pre-curing don't
worry you can now now yes you
can now
put it back in and you can now cure without fear
you will no longer have that
burning sensation and now Yes, our product
is already completely dry, it is already hard and
without any burning sensation, very
good. Just to finish, I want
to remind you that any of all these
products can cause this
sensation. So please be very
careful when applying the cure, whether
you are Your client is a very
ugly feeling But we can avoid it in some
super simple ways Remember that
you can use the materials you
want in the quantity you want and
without the danger of having a sensation that it
burns you but you have to inform us
well, you have to do it well to achieve
our designs and avoid these
terrible burns So if this
short video helped you and clarified your
doubts Give me your thumbs up it's
completely free subscribe and
share this video with someone who you
think might like it or can
help you Always remember to layer
thin even if you have to put two
three or four but it is preferable to do
that than to put your hand into the lamp and
feel that it is burning you so be
very careful please leave me in the
comments and I already knew about the
pre-curing and also leave me in the
comments if you The lamp has a
slow drying mode. I am Jessica Alba. I
love you very much. I send you a big
hug and a kiss. See you in the
next video. Bye.