Top Belay using a Petzl Reverso

sports and sports
111 followers
A breakdown of the thoughts and process a leader takes when setting up a belay from the top of a climb.
This video demonstrates proper techniques for using the Petzl Reverso. Many other plaquette styled devices have a similar set-up, however, refer to the device manual for specifics.
#sport #mountainclimbing #mountainguide
Hi there, this is Jeff from Smile Mountain Guides and today we're going to be showing
a tutorial about how to set up the belay device and then belay a fellow climber up
from the top of a pitch. Alright, so we're at the top of the pitch and I'm going to attach
myself to an anchor and belay my partner up. Before I do any of those steps, if this is a
multi-pitch climb, I'm going to decide where I put myself in relation to the next pitch,
which will then help keep everything organized. For example, if I'm climbing the next pitch
and it's to the right, I'll anchor myself in on the right-hand side and then belay my
partner on the left-hand side. This keeps all the systems in line and generally helps
cause less twists and confusion at the belay when your partner arrives.
I'm climbing up, the first thing that I do is clove myself in on my leading rope,
make myself comfortable, and then I put my belay device in. So, an example, I'm leaving right for
this next pitch, I'll clip my belay device in on my left-hand side. My system's already ready to go
before I yell off belay. Then, I'll share it to my climber that I'm off belay. Belay's off!
I'll wait for that confirmation and then I'll start pulling up the rope. As I pull up the
ropes, I'm trying to stack the rope in a neat pile at my feet and wait until tension comes
into the line. When I feel this tension, that means that I can put my partner on belay. I'll
take a bite of rope and I'll pass it through either slot of the reverso, it doesn't matter
for one climber. I'll line this bite up with the guide wire in the back of the device and then I'll
take an additional locking carabiner and I'll clip everything together. Once the system's locked up,
my partner is on belay and then I can share that information with them below.
You're on belay! Climber's ready! So, now we're ready to belay. I have my brake hand, which is my right hand
and a helper hand, which goes down to the climber. I'll bring my hands together, I'll match it,
pinch the brake hand and slide that back up to reset for a smooth belay motion. So, I go pull,
pinch, under, slide and reset and I'll do this until they get up to the top.
As I'm belaying, I'm trying to keep my brake strand of the rope in a clean pile
so that everything is organized as my partner arrives to the belay.
