Unreinheiten entfernen, Flecken entfernen, Haut glätten, Dodge & Burn - Die Portrait Retusche besteht aus verschiedenen Techniken. Um zu einem guten Ergebnis zu kommen, gibt es dabei unterschiedliche Methoden. In diesem Video zeige ich dir eine spezielle Technik zur schnellen Retusche.
Kennzeichnung von Werbung: Dieses Video enthält Eigenwerbung
This is what the picture looked like before and this is what it looks like now, before and after.
The portrait cover can be a complex and elaborate thing and there are also different methods to get to the goal.
In this video, it is supposed to be about a special technique that I would like to introduce to you now.
The picture that we use in this tutorial is as always linked in the description
and we start directly by looking into the layers and adding a new empty layer over our background image.
Once we have done that, we come to the first special feature of this technique,
namely, we now take our remove tool in the tool bar on the left.
A tool that doesn't exist in Photoshop for that long and that differs from the conventional methods for improving by being AI-based.
So, we select the tool, put the hook in the top bar, select all layers and also remove after each line.
In this first step, it is now about removing all rough impurities on the skin.
All the discoloration that we also have here in this picture,
i.e. darkening around the eyes or red discoloration, red skin spots, we ignore for now.
It's really about all these rough impurities.
To do this, we set the brush appropriately large by holding down the ALT key and the right mouse button and moving the mouse to the left and right.
And then we can just go over these impurities and improve them all bit by bit.
And I think you can already see that this tool does a pretty good job at it.
Namely, it is not just blindly copying areas that are around it,
but AI-based it tries to fill the area in such a way that it fits the rest of the picture.
And you can just try it out.
You will notice that if you set the brush too large, I'll show you that,
then of course not so nice results come out.
If we look at the whole thing now, we will see that a structure is simply created,
which then repeats itself over and over again, which also looks a bit artificial.
Of course we don't want that.
That's why we only set the brush as large as we need it.
And then we will get pretty good results.
And that's how we do it for the whole picture.
Let's skip this process a bit now.
I think the principle behind it is clear.
Of course, you have to say that you won't have much to do in this step, as in this example.
I chose a relatively difficult example here,
but I think it's much more interesting to see what is possible with this method.
And of course, it's up to you how detailed you go in this step.
That would be step number one.
Let's take a quick look at the before picture and the after picture.
That worked pretty well so far.
In the next step we come to the frequency separation.
Here's what we do.
We look into the layers again and add a new empty layer at the top.
In this new layer, the result from these two layers should be displayed in one layer.
We copy the whole thing in here, so to speak.
And that works with a shortcut, which is CTRL, ALT, SHIFT and E.
If we press all these keys, you'll see that the result from these two layers will be displayed in this layer.
If we hide the layer and show it again, you won't see any difference,
because the whole project is displayed in here.
That's how you could say it.
And we copy this result, this layer, with CTRL, J, so that we have the whole thing twice.
We can now name these layers for a better overview.
We double click on the bottom layer and name it with color.
This will be our color layer, in which we remove the skin structure and only keep the color.
The upper layer is for the details, the skin structure without color.
We can name it with details, for example.
Confirm with ENTER.
Then we can hide the detail layer and click on the color layer, so that it's selected.
We can now edit this with a filter, on top of filter, here on the softening filter and gaussian softener.
We set this gaussian softener so that the skin structure is no longer there.
So we go up with this blur, until you can't see the skin structure anymore.
Really go high enough, I think a value between 8 and 9 should fit in this picture.
And then we confirm that with OK.
Then we hide the detail layer again and click on it, so that we can edit it.
Now we go up left to picture and here to picture calculations.
In the picture calculations we want to do the following.
We want to remove the color layer from the detail layer.
This works like this.
The source, this is our current project.
The layer that we want to remove, this is the color layer.
So we select the color layer, we named it.
We set the blend mode to subtract.
We want to remove the layer from the detail layer, so we go to subtract.
With subtract we have a black picture, we want to adjust this.
We have two values that we can adjust, namely scale and offset.
We set the scale value to the maximum value of 2, so that everything is subtracted.
We set the offset to 128.
Why exactly this value?
Simply 0 means black, the maximum value is 255, that means white.
We want to create a neutral, a medium gray.
And therefore we go exactly to the medium value 0 to 255, that would be 128.
So that only the details of the skin are in this picture.
If that fits, we press OK.
The color is now removed from the picture.
And so that we can see the structure again naturally,
we set the blend mode for the detail layer to linear light.
Linear light, then the whole thing looks normal again.
And if we do the following now, namely hold down the control key
and mark both the detail layer and the color layer,
which then pack into a group via the folder symbol,
then we see, if we fade out or fade in the group, no difference.
That means in this group is now really this picture in it.
It is now simply separated into the details and into the color.
So we still have the original picture just separated.
And that's exactly what we need to be able to continue working now.
Namely, we can fold out the group and duplicate the color layer with CTRL J.
We can first fade out the detail layer and the copy of the color layer,
which is now selected.
We now take our remove tool again on the left,
put it this time around, namely pick up the hook at all levels.
We want to take it out, because we really only want to work in this level.
And what we can do now is to process all these discoloration on the skin.
All the spots, everything we want to get rid of,
we can now process.
So again adjust the brush to the size.
This time we don't have to pay attention to the structure, to the details.
They are now faded out, so to speak.
And it's really just about the color.
And now we're trying to create the right color everywhere.
That means all these spots, depending on how detailed you want to go here again,
you can really process all the fine areas here now with the remove tool.
By the way, when processing, it's not just about these reddish discoloration,
but you can also use it to process, for example, eye rings
or other dark spots around the eyes.
Let's take this one, for example.
I'll go over it now.
And so we can just get rid of these dark spots a little bit.
You can do that everywhere.
For example, this crease here by smiling.
We can just get rid of it a little bit.
Because the details are still there, you will still recognize them.
But we just make sure that it doesn't look so extremely dark at this point.
I think this process is also clear from the principle.
That's why we skip that.
And I would have finished this step as well.
And let's take a quick look at what I've done here.
So I'm going to hide this copied layer.
And then we see the whole thing before with all these discoloration on the skin
and with the processing.
That's the difference we've created on this level.
And if we now hide our details here again,
so click on it once,
then we get a natural picture again with processed skin.
That means all the impurities are removed,
all the discoloration, the spots are gone,
depending on how detailed we worked, of course.
And that would be the result so far.
If we hold down the Alt key and click on the eye of the background image,
then we see the original picture here and our processed picture.
A pretty extreme difference.
Of course, we could have gone even more detailed,
but I think you can already see what is possible with this technique.
I like it pretty much.
And now you could continue with such shaping work,
for example with a simple dodge and burn technique,
to shape the nose a little bit
by adding a new layer here,
an empty layer that you switch from blending mode to soft light,
then use a normal brush tool on the left,
set the colors black and white here,
in the color selector black and white,
and of course very gently here with a flow of 1-2%
and a very soft brush.
Now we can, for example, start with black here,
draw a line on the nose down here on the left,
where it is already a bit shaded anyway.
I make the brush a little smaller,
about like this,
start here, hold down the Shift key
and click on it again down here,
so that we get a slight additional shading here.
Then we can switch to white color
and then start here with this brush,
hold down the Shift key,
draw a line down and highlight it a bit here.
And so you could give the nose a little more shape,
if you want to.
You see, it just looks a little flatter,
a little flatter,
and so you get a little more shape again.
Yes, that as a little bonus.
Otherwise, that would be it.
Here again the difference, before picture, after picture.
I think it turned out to be a very nice result.
I hope that I was able to explain the method intelligibly.
It was also a bit more detailed,
but I think a method that leads to great results.
If you want to learn more about Photoshop now,
then feel free to look in the video description,
there is my detailed complete course linked.
And otherwise I hope that we will hear each other again soon
in one of my next videos.