Tự Lắp ráp Máy may khi mua hàng Online Không cần Thợ chỉnh sửa Máy may Vắt sổ Kansai

Kỹ Thuật May
14 người theo dõi
1 Lượt xem video·15 thg 11, 2023
Now, let's talk about the owner of this machine.
I asked him to make a long-sleeved shirt for me.
I chose the silk one, which is suitable for the long-sleeved shirt.
When you receive the machine,
The legs of the machine will be removed.
Now, when I put the machine together,
I will put the four legs upside down like this.
I will check the machine and see if the legs are in the right position.
put it all in and then when I put it on the floor, for example, the floor that I put it on but it's low and high, then I'll increase it.
These are the ones I have to teach or put in so that I can increase this one so that the four legs are still yellow on the floor.
Then the yellow surface before I put my feet in, I take the paper, I take the paper, I peel it off below, then I put the yellow surface on.
That's the one with the round hole, the big hole and the small hole.
I put it in front of me, I'm standing in this position, I put it like this, then I put my feet up, I turn the yellow surface up, then I put my feet up.
Well, when the rice is sent, the rice will mark the position of the legs.
Many people don't know, many people don't know, then I can't stand it.
This hole, this hole is where I put my head up, so I'm afraid of how it's in the middle, it's in the middle of these two.
Many people don't know how to do this, it's near the snow outside, or it's in here, so it's not right.
I have to let the moon do it for you, it's balanced, it's still yellow, it can be about this, it's about from this hole.
I can split it in half, then from this to the edge of the table, it's the same over there, but it's the same over here.
Well, I can, for example, now I'm looking at the hole, I'm looking at the hole, how is it in the middle of this horizontal part?
Well, for example, if you put it like this, it's a bit slanted to the other side, so now it's back.
I'm looking at how to make this hole in the middle of this horizontal bar, then it's absolutely balanced.
Then, if possible, from this hole to here, it will be the same as the edge of this hole to here.
And then what do I add next?
Next, the part that is hollow here, the part that is hollow here, is that I put a clamp in, a clamp to hold my small tools, my sewing tools.
Well, remember that this scene is the side I sit on, and the other side is the big hole and the small hole.
It's in the front, the small hole is to catch the value, and the big hole is to move the cable down later.
That's it, it's that simple.
Just remember that this side, the side without the big hole, the small hole, is on the side of the person I sit on.
So when I put my feet up, I put my feet up to avoid putting my feet upside down.
I put it on this side, it goes to this side, it becomes this board, it's on the other side.
Remember that this horizontal side, this horizontal side is always on the side of the big hole, the small hole.
And then this horizontal side, the side I sit on, this clamp has two cables, you see, and then these little snails, these little snails, on each cable, it has three holes.
See, there are three holes, so I put three snails into this cable.
For example, what is this big snail for?
This big snail is to catch, to catch the leg in the table.
This big snail is to catch this hole in the table.
So to be sure, I'm not sure, but I'm sure.
So I put it in the hole inside.
Don't catch the cat too much outside.
So people make two holes, I put it in the hole inside.
If you want to be sure, you can make two holes, you catch two snails, that's for sure.
But usually just four is enough.
Four, four, four, four, four, four, four, four, four, four, four, four, four, four, four, four, four, four, four, four, four.
Then the pull lever, the pull lever, part of it, part of it, has a part for me to hold.
I hold my pull, and at the other end, there is no
There is a head, I hold my pull, I put it inside my heart.
it up.
and now the next thing is that I put the oil pan on the oil pan and the
pillow, then this oil pan, this one, I put it in this hole, then this hole
keeps the oil pan by four of these corners, there are four of these corners, it will have four
corners, you can see the shape of the four corners, you can't put it wrong,
then this tree, this tree, I put it here, I put it here, so that when I need to clean the machine,
I tilt the machine, I tilt the machine to let it lie on top of this, this tree is called a
pine tree, this one is made of plastic, it's also quite crispy, but I tilt the machine, I put it down, I tilt the
machine over, I just put it gently, don't put it too hard, it will break this tree, it will break this tree,
now before I put the oil pan in, put the oil pan in this hole, then I have to
put the rubber band in front of it, put the rubber band in the four corners, put the rubber band in the four corners, then I put it in,
I put it in, I put it in, then I press it down, I press it for a few rubber bands, it's all out there,
press it down, then this one, this one, or the oil pan, it's close down, there's a rubber band,
the rubber band that I pressed is equal to the table like this, then it's right, it's
there, it's there, then I'll use this nail, I'll put it in, it means that
this side has one, this side has one, I have two, it's closed, it's like this, it's closed, it's closed,
how can I leave it, it's still a bit of it, it's still a bit of it, don't let it
stick to this edge, it's broken, I put it in, how can I leave it, let it
keep this, it keeps this, it doesn't let this one run up, it's the same here, I put it in,
how can I leave it, how can I leave it, it's still a bit of it, let it keep this edge, the edge of the oil pan,
then next, next, I'll check this snail, see if people tell it to kill it, this snail, this snail is
for tomorrow, but the oil is old, then I'll tell this snail to release the old oil,
I'll release the old oil, it's down here, open this snail, it's always here, it has a hole, then the oil
will flow down, I'll release the old oil, then I'll tell this snail to be hard again, then pour the
new oil in, then pour the amount of oil, it's just right, it's in the oil pan, it has two
holes, it's two holes, it's a sign that the letter L is at the top, then the second one is higher than the letter H
at the top, then I pour the oil, how can I let it touch the top of this, don't pour
too much on it, too much on it, when I sew it, the oil will come out here, it's very
easy to see, it's too much, this hole, so the amount of oil is that I sew for a long time, I
check if it falls down this line, I'll soak it more, I'll soak it more, it's
floating on the top line, I'll soak the new oil, so I have to let it bite the top line,
it's the amount of oil, you can see it here, it has a hole, this hole is for me to put
it in, this is called the oil, the oil for the duck legs, what is this for, let it
be, let me put the pillow on it, put this on it, let it break the duck legs, then here is the pillow
pillow, then I put it in here, see it, put it in, put it in, then I'll see how to do it, I'll see
how to let this one, when I put my feet in here, I put my feet in here, it fits
my feet, let me pinch it, I pinch it, I pinch the pillow, but don't have a pillow, how do I pinch it,
for example, let it be like this, I pinch it like this, it's easy for the duck to come up, don't put it like this,
if you pinch it up to here, there's no leg that's flying, come out of here to pick up the duck's legs
. this is the trap it keeps this snail then this one this one is put in and out
and then this snail is it helps me adjust this one to go back and forth like this
And this snail, it helps me put this in, put it in, or put it out like this, okay?
This snail, this snail, it helps me move this rubber pad, this rubber pad, up and down, so that it doesn't, when I pack it, it doesn't hurt my legs.
Don't make me hurt my thighs or my knees, I'll adjust this for it to fit.
Open this corner, open this corner, move up and down, or shake it, shake it, see?
Oh, now the next step, the next step is to put the head of the machine, I put the head of the machine on here.
Before I put the head of the machine on, I notice these two, I call these two, these two, then on this side, be careful, be careful in front of the machine.
There are two holes in the base, there are two holes, there are two holes for me to put this in, put this in, see?
And this hole is the same, put this in, see?
There, when I put the machine in, I watch these two, I watch these two, let it fall down these two places, see?
There, I put it in so that it falls into this hole, see?
There, now I have put the machine in, it lies still, somewhere, it is level with the machine, here, the place that I said earlier, put it in like this.
There, when this tree returns to this tree, this hole, I tilt the machine forward, tilt the machine forward, let it come in here, let it come in here, gently put it down.
And if anyone is afraid that it will be stuck in this place, I will take the tool or something, I will put it on this tree, then I will put the machine on.
There, when I catch the value, it's like this, but this one is a bit high, this one is too high, then this one, this one, I just let it cut the table about 1g, 1g like this, so I have to take this down, take this down, it's about 1g.
Then I hold this guide pin, how can I make it parallel to these two wires, it can't be that this one is on this side and this one is on the other side, this one always has to be parallel to these two wires.
This is how the value is put in, it's like this, it's like this, it's almost done, now the rest is the rest is the chopsticks.
Let's just say it's all there. Next, I'm going to install this control bar, this one connected to the pedal.
After I don't see it, I'll put it in, I'll put it in, I'll put it on, then I'll roll the end of this rope on this hole, I'll put it in here, I'll put it in here because
Don't plug it in the wrong way
Let's continue
Next is the power cord
This is the power cord
So
I put this plug down
It fell into the hole
See
There
In general, this is
People put the power socket below
I put it down
If I hang it up
I don't need to put it down
For example, the power socket
I hang it up on the wall
It doesn't lie
It means it doesn't lie low
Compared to the machine table
If it lies on a high wall
I don't need to put it down
Then plug this plug in
This plug must be the right way
Everyone look
See
See the plug
It's flat on one side
It's round on the other side
See
It's the right way
That's the job
Put it together like this
The rest is the chopsticks
First from the outside to the inside
It's a pillow
It's like this
Then the chopsticks
The chopsticks are connected from the table
Go up
See
So
At the top of this
I caught it in this position
That's right
Then go down
This one is upside down
This one has to be on this side
It's on this side
See
Then this is the elevator
I open this corner
Let me increase the elevator
This pedal
That's it
But I advise everyone
I put it up a little bit
But don't be stupid
So
I pedal
It will be tired
It swells my ankle
I can't do it
I can't control the pedal
Can't control
The speed
Then
I pinch my nose
I can't control
Then it also affects my ankle
Pay attention
Already
Just now
Guide everyone
Step by step
When I
Buy a machine
I bought
A machine from afar
Or
Call it shopping online
Buy online
And buy
From afar
Then go back
Step by step
What's next
Let it become a machine
Like this
This machine is
Ready to send
Lam Dong
Send to Dalat
Also very far
Very far
But not as far as
Nghệ An, Hà Tĩnh
Ninh Bình
Lạng Sơn
Bắc Giang
Hà Giang
In general, rice
Send goods all over the country
If you need
Contact the number
Galo on the screen
Now
Talk to
The owner of this machine
So
Because of me
The machine I made
Thin fabric
Long shirt
I chose this
Teeth
Suitable for thin fabric
This needle is 11
12
When you sew
Like jeans
You have to change the needle
Number 14
Then
Adjust the hole
Because if you don't adjust the hole
It will destroy
It will destroy the hole
Hole
When you put the needle back
11 12
It will be removed
Advise
When you sew
This needle
Tomorrow
It's okay
If it happens
The phenomenon of breaking the needle
Is forced to replace the needle
Tomorrow for a long time
A week or something
Is forced to adjust the hole
The technique that adjusts the hole
Now on the Internet
They also teach
Also a lot
If you have a hard time watching
Those people are better
Better than two rice
Sometimes
Two rice also salt
I will guide everyone
Two rice
Please pause the video here
See you in the next video
