Выживаем с NIGHTHAWK ADVENTURER 🔪
Магазин Продавца ► https://bpsknives.com
► https://bpsknives.com/uk/product/nighthawk-adventurer
ТЕЛЕГРАМ канал ► https://t.me/bs_knives
ТЕЛЕГРАМ группа ► https://t.me/bs_knives2
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Купить нож из обзора и помочь каналу:
► https://basa-sale.wixsite.com/shop
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
My E-mail ► [email protected]
https://www.instagram.com/basa.attack
#нож #обзор #knife
So, today the plans for the review are unpacking, measuring the technical characteristics and going to the forest for testing, then, according to tradition, we will summarize.
So, let's unpack first, see what is hidden inside, inside we immediately have a tag, the knife itself and scissors, in principle, there is nothing else and no need.
So, the scissors are the same as in the previous model, only here we have such a mount for the fire and the fire is inside the scissors, a little later we will return to them, first consider the knife itself.
So, the knife is called the Night Hawk Adventure Seeker, designed for bushcraft, which we will actually check today.
The handle has a bog oak, in principle, the same material as on the previous model, but I already see that the processing here is still better, if you look at the previous model, we see such roughness and when the handle gets wet, moss appears here.
Here is a universal shape of the blade, low descents, so that this knife can not only cut products, but it should also be suitable for some kind of power work, construction of a hut, dwelling, fire and so on.
Let's move on to the technical characteristics, check the weight and length of the blade. The blade, if you measure from the beginning of the handle to the tip 13.5 cm exactly, the weight is 156 grams.
In the spine, it will probably be thicker than in the previous model, here we have about 2.5 cm, here a little less, but not much.
Here you can already load the knife, and therefore the handle is already more grippy and there is already a reserve for a huge hand.
This is how it looks, let's see how it is located in the scabbard. Here we have such a fire, that is, the case is one-to-one, as in the previous model, the only thing is that there is a mount for the fire.
Let's try to place it like this, in principle, it is quite convenient, in the forest we will test it all.
To say that there is an excellent firewood here is not to say anything at all, I had firewood from Ganz and from more expensive manufacturers, but there has never been such a powerful one.
By the way, the night hawk does a good job of mining shavings for firewood, it is convenient and without problems to do this.
We were working under a small rain, the shavings were just about, but did not set on fire, but it was worth a drop of oil and it burst.
In general, I was more than satisfied with this firewood, this is the best firewood that I had and therefore I can advise it.
The hawk works great on wood, a convenient handle, a convenient blade.
It hits in general, I still had to look for such a churka, which he would not have eaten for the first time.
Products, of course, this is not his element, not from the spine, but still this is a knife and it cuts, and as for bushcraft, not bad.
The steel here is 50H14MF, stainless steel, in principle, I can confirm this.
The knife remained without care for a long time, did not wear out after work and, as you can see, it has retained its presentability.
For example, this is what it led to on the previous model, here we see such darkening, but here and carbon.
That is, it also corresponds, there were no problems here.
Stainless steel, according to the manual, they promise 56-58 units, I think this is closer to 58 units, because after all, the knife has retained enough sharpness.
This one, by the way, has already sat down with the same loads, but no more.
There are no more than 60 here, because we swept this knife well.
And as you can see, it has retained its tip, that is, it did not crunch, the steel is not tempered and not soft, that is, it did not bend and did not split.
Therefore, I think that this is how it is, as promised, somewhere around 57-58 units, this is what is needed for such a knife.
Further, what can I say about the knives, the knives are great, everything is fixed well, no sounds.
The only thing I will note, as in the previous model, there is no drainage hole here, but I think the manufacturer will solve this soon.
Because the price of this knife is 2000 hryvnias or so, but the knives themselves cost about 1000 hryvnias and it turns out that for 1000 we still get a knife.
That is, the prices are normal, there are no overpricings here, that is, for 1000 hryvnias you need the knife itself for 1000 hryvnias.
And plus, I forgot to say, here we have an excellent firewood.
This model, I think, is balanced, that is, there is suitable steel, suitable shapes, processing, and so on.
I would not change anything, except that I would add a drainage hole.
If we talk about the previous model, it is closer to my heart, it is better for me, but it is raw.
Here, firstly, you need to put some interesting stainless steel, because the spine is thinner, it should withstand the load.
But here the loads are less, because this is a pure cutter, a descent from the spine.
Here you need stainless steel, a little fluffier handle.
We see that the handle is thinner, a little fluffier handle.
And, in principle, everything, this will be a hit, it will be more in demand, because not everyone survives there, not everyone goes on hikes.
But practically everyone goes to picnics, and if you modify this model, put a good stainless steel, a little fluffier handle, it will be a hit.
Here, at the night hawk, you do not need to change anything, a clear, balanced model, this is how it should be.
And who was looking for just such a knife, in such a form factor, then for this day there is a normal one.
All links will be in the description of the video, there are also links to our telegram public, to our telegram chat and telegram group, where we play knives and publish new products.
See you soon, bye!

