Como mejorar las suspensiones de tu moto GRATIS. 👌🏽🎇🏍💰

DELTA RIDERS
47 seguidores
8 Visualizaciones de video·8 nov 2023
En este video les hablo acerca del las suspensiones y doy algunos tips para adecuarlas aunque es un tema tremendamente amplio.
This serves to increase the rigidity, that is, the hardness with which this spring behaves. The harder this spring, the slower the suspension will be, but what happens with my motorcycle?
As I work very frequently with weight, I need the suspension to be more rigid, so that when it comes to cushioning, this cat that you can see here does not hit so easily, it does not reach its top.
So, why does this not modify the height of the motorcycle? Because this cat, here let's say the motorcycle does not have any load, the suspension is free, so as you can see it already has its maximum length, from there it will not stretch more.
If I turn here and put it in the position here, it will not stretch more, that the only thing it does is configure the hardness with which this spring acts, that as a first point.
If you are a heavy person and you work with a very soft suspension, both front and rear, the suspension will suffer more and will reach the top more easily.
What do I recommend? If you are a heavy person, have a slightly stiffer suspension so that the springs help the internal cat and not only this one that works, but also the spring, the one that supports that energy transfer. That's like a second tip.
Well, third tip, you always have to try to keep the suspensions balanced, that is, both the front and the rear suspension are at a similar hardness. Why? So that there is no discompensation.
So it is advisable to always maintain a similar hardness both in the rear and in the front.
How can I increase the hardness of the front suspension? Well, there are several methods, but one of the simplest is to add a little more liquid for suspensions in the bars.
Also, going deeper, you can change springs, you can change bushings, you can change the spacers that the suspension brings internally. But then you have to be a mechanic who knows the subject.
It is also necessary to mention that our low-end motorcycles, low-cylinder motorcycles, are very restricted in terms of suspension modifications and in terms of configuration issues.
As you can see, the rear suspension brings only hardness and the front suspension practically brings nothing. It comes very generic and it comes as the factories consider the most suitable configuration for all uses.
But obviously all types of driving and all pilots are different. I am going to explain in another motorcycle the same issue of the configuration of hardness but in a monoshock.
Obviously you have to take into account that the behavior of a dual shock and a monoshock is very different.
Ready, here I have it. This is a 200NGS pulse that the owner has already configured the suspension because initially it comes in the second position, that is, in the second softer position.
But the person realizes that for the use that he gives it, it is a suspension that comes very soft, so he already raised it two positions.
What happens? Obviously the spring works more and the suspension gets a little more rigid. But in itself it is the same configuration.
The only difference with a dual shock is that obviously the position must be the same in both shock absorbers because if not the motorcycle will be unbalanced and it will feel very strange.
Well, it must also be mentioned that this suspension is a little more modern and has an aid that is from a nitrous gas.
This is the nitrous technology of Enduro that comes in the 200NGS pulsars.
But obviously this is a shock absorber that is a little more sporty than the one I have on my motorcycle.
Well, going back to my motorcycle, I explain again.
When you have configured the suspension in the way that you consider is more comfortable for you, that you feel more secure.
Obviously when you modify the hardness in these springs and obviously by normal use these springs give way.
Let's say at one point they came initially like this, but with the load and with the passage of time they lose their length.
That is why my motorcycle at this time has only one position.
When the spring arrives here and I still feel the suspension very soft, it is because I must either change or repair the suspension by changing the spring.
Or already in its defect, change everything that is already the shock absorber.
Depending on how you get spare parts or how it is more affordable for you.
Also another thing that I advise you.
Whenever you modify something in the suspension, go out to try it, but go out with due caution.
Try to feel what changes are there on the motorcycle.
Try to have that sensitivity to detect if it is the right configuration that you need in the suspension.
And the other advice is that if you are a person who works with your motorcycle with a lot of weight or driving very large loads.
Well, obviously a hard suspension is better, especially in the rear part.
So that these shock absorbers last much longer and do not suffer so much.
Let's say at this time my motorcycle has almost 60,000 kilometers.
And this is the time that the shock absorbers do not leak, they do not have any kind of escapes.
But that's why.
Something particular that I have seen in the Pulsar 180 is that when people do not modify the suspension.
And they leave them the softest point.
The motorcycle falls.
I have seen some motorcycles, let's say this one has this space between the rim and the mudguard.
But when the shock absorber gives up a lot and the spring is very soft.
And it is in this position, the mudguard tends to be around here.
The motorcycle tends to be much lower in the back.
But that's why, because the spring has already given up a lot.
And when there is an excessive load, even this shock absorber tends to bend.
Like making a curve like that.
Why? Because people do not configure.
And this is for that.
These positions that are here are to properly configure the suspension.
And as a last piece of advice, always remember.
When you change something in the suspension, modify some parameter.
Go out to test your motorcycle, but go out with caution.
Try to feel if the change was good or bad.
Because this is test and error.
For one to achieve a suspension that is completely suitable for one's use.
It is test and error, test and error.
Because obviously we all do not have the same type of driving.
And we use the motorcycle for the same.
This speaking of street suspensions of normal use.
Because if one goes to suspensions for racing motorcycles or enduro motorcycles.
The issue is much, much broader.
It is an issue that has many, many things to study and learn.
So that would be all for today's video.
You know if you have something to add, a comment, a suggestion.
Or know a trick in terms of suspensions that I have not mentioned that I do not know.
For that is the comment box.
So that they share and we can all learn.
So thanks for watching.
And as always, have success.
And until the next riders.
Bye.
