Dấu hiệu ECM bị mất nguồn @KENHKIENTHUCOTO

KÊNH KIẾN THỨC Ô TÔ
11 người theo dõi
2 thg 11, 2023
Dấu hiệu để nhận biết ECM bị mất nguồn là gì? Khi nào cần kiểm tra mạch nguồn ECM? Video này sẽ trình bày một cách chi tiết về vấn đề này.
Here we can confirm 100% that the ECM is out of power
However, if an ECM is out of power, it can be a negative or negative source
It can be a short circuit or a short circuit
By checking the 5V power supply, it will let us know exactly if this box is out of power or negative
Hello everyone
Today, I will show you how to check if an ECM is out of power
When the ECM is out of power
As we know, when an engine is out of power, there are many reasons
The first reason is the source of the ECM box
If an ECM box is out of power, it can't operate the motor
There are also many other reasons
For example, the ECM box is not working properly
The ECM box is not working properly
Check engine light
Analyze charging voltage
Check cam shock's voltage
Analyze coolant voltage
3x Computer
Let's measure the voltage
This is 4.92V
This is 5V
This is 4.9V
This is 5V
Let's check another place
If I know that there is an EGF wire, I will unplug it
When the machine is on, it will be 5V
This is 5V
EGF wire when the switch is on, it is 5V
We can check here
This is the wind tunnel, there is a temperature sensor in here
When the wind tunnel is unplugged, the EGF wire will be 5V
Let's measure
This is 5V
This is the most accurate way to check if the ECM has a source
To decide whether to check the source or not
If we measure and see that there is 5V, we don't need to check the source of the ECM
This is the most accurate way to check if the ECM has a source
There are 3 other ways to measure and check the source
We can guess that the source is not 100%
How to read the ECM or connect the ECM
If the ECM has a source, it will have a source
If not, it is not 100% sure that the ECM has a source
The same goes for the ECM, when it has a source, it has a source
But when it has no source, it is not 100% sure that it has a source
For some motorcycles, it is not accurate to check the source
The best way is to check the source of the ECM
We have checked the source of the ECM in normal conditions
Now I will simulate a case where the ECM has no source
I will remove the EFI bridge from the ECM
The EFI bridge is located here
This is the white EFI bridge
I will remove the EFI bridge to simulate the case where the ECM has no source
Now I will check the ECM
I will connect the ECM and check the source of the ECM
I will turn on the ECM
I can't see the light
I removed the EFI bridge to simulate the case where the ECM has no source
I will turn on the ECM
I will check the source of the ECM
I can't see the light
I will turn on the ECM
I can't see the light
I will turn on the ECM
I will connect the ECM to simulate the case where the ECM has no source
When the source has no source, it is an incomplete transformation
DC emits negativeSurface & negativeSurface
ACEmors'dCAusedACMad
AC has a!!
To avoid misunderstanding, we only check the source
We do not check the audio side
For example, we check the source, but we see that there is a source
But the ACM box is now broken
If we do not check, we conclude that the source box is not correct
That is, when the source is lost, the voltage of 5V is close to 0V
And when the source is lost, how is it?
Here I will simulate for you to see
When the ACM is out of source, I will remove the ACM cable
Let's check the voltage of 5V
Now I will remove the ACM cable
Let's see what happens when the ACM cable is broken
I will connect the ACM cable to the position of the ACM box
I just removed the ACM cable
I will connect the ACM cable to the position of the ACM box
What is the voltage of 5V?
Now I will remove the ACM cable to simulate the case of the ACM cable is broken
Let's check the voltage of 5V
Now it shows 11V 53A
About the same voltage as the battery
I'll test with the EVF cable
Normally, without power on, the EVF can only show 5V
Now it shows 11V 7A
I'll try with the THRA cable
11.7V
What is the feature of this ACM box?
When the ACM box has a normal power supply, it will be 5V
When the ACM box has a fault, it will be 0V
When the ACM box has a fault, it will be 7-10V
This is a very good way to measure the power supply of 5V
It will help us determine whether the ACM box has a power supply or not
If the ACM box has a fault, it will be cut off by the power cord
This is a very good way to measure the power supply of 5V
If the ACM box has a fault, it will be cut off by the power cord
