Lên đà thay trục chân vịt tàu 3 máy🍀màn hạ thủy và chạy thử nhớ đời(3 engine barge)

Ladies and gentlemen, in front of you is a Bond barge with three engines. I made a lot of clips about this barge the other day. Today, my uncle came back to replace the valve that was pulled up to the deck. It was pulled all the way up to the deck. Now, my brothers are preparing to install the propeller. Replace the valve that was behind it. The valve in the middle of the engine was cut off because of the water. As you can see, the size of this barge is quite long. The length of the barge is 7 meters. The length of the barge is 30 meters. The length of the barge is about 2 meters. This barge is equipped with three engines. The two engines on both sides are Cummins NA4 engines. The diameter of the engine is 3.5 meters. Replace the new propeller. The diameter of the propeller is 1.45 meters. Replace the valve in the middle of the engine. The valve is a 120mm Pinoch valve. I used to use the old valve. The old valve was broken, so I replaced it with a new one. Replace the valve in the middle of the engine. The diameter of the propeller is 2.3 meters. The diameter of the propeller in the middle of the engine is 1.4 meters. The valve in the middle of the engine was cut off because of the water. The valve in the middle of the engine was broken, so I replaced it with a new one. I used it to break the new propeller. I will put the new engine in the barrel. I will put the old propeller in the barrel first. I will disassemble the parts of the new propeller. I will disassemble the parts of the old propeller. This is the middle part of the honeycomb This is the honeycomb of Lien Thao This is the middle part It's so weird It's so weird to run This is the old honeycomb Have you turned it on yet? Not yet Not yet, I just have a camera I just have a camera You just have a camera? Yes I was scared last time