Máy Vắt sổ Gia đình Vàng chanh Ngựa Bay 3 chỉ giá rẻ tại Cửa hàng máy may Hai Lúa

Hello everyone, this is the machine I'm going to send to the buyer in which province I forgot, I haven't seen the address so I don't remember This is a family notebook machine, a three-pointed sword, the goods have been used, the motor is 100% new And the machine, the goods have been used, but do you see it clean and beautiful? They checked the whole machine and fixed it, it was as hard as a new machine Those that are loose, those that are loose, do not continue to use, replace These are the things the two of you gave me This is the LED light, this bottle is for me to suck the oil out of this In here is the machine oil, I suck this bottle, I dip it in these holes These are the places that have the name of the oil, or down here Sometimes I take this snail out, there is also one in here Take out three snails, then take this lid out, then suck the oil into the parts below Where it is squeaky, it sucks the oil, these holes I use this machine to fry in oil It's been loose for a long time, because it has oil on it, so it's not very smooth So it's been loose for a long time Now it's time to assemble the machine, now I look at the whole machine First from the value, I see how you wrap it, you just wrap it up like that This guide needs to be right at the center of the wire that I put the guide tube in There are two tubes in front, one tube on the side, it's still like that, it's square When I send the machine, I take these out, so I have to put them back together You just look at it in the same way, then put it on the screen like in the video If you don't know anything, just call me Then the motor is the same, when the motor is finished, it only has two snails When I go back, I hold this wire, don't let it slide through This is just a model, just a model to show you It only has two snails, then hold this wire, it must be parallel to the motor pulley I'm going to show you how to do it, but don't let it slide through It breaks the wire, it's very fast Now I've just finished the value Then the next step is to make the legs, the legs of the machine The legs of the machine include two straight ones, a large horizontal bar and a round horizontal bar The round horizontal bar is fixed by the snail The front horizontal bar has two snails on each side That's how it looks like Because if you do it differently, it won't work Because these snails are just enough to catch snails, so you can't catch them The important thing is that you can see the structure of it and do it like in the video There are four snails on each side of this snail The snail has a hidden snail Note that this round bar is in my heart, and this horizontal bar is in front Now let me look back You see, I'm sitting here and I'm sitting here, I'm sitting here and I'm sitting here, the horizontal bar is still in my heart In addition, there is a machine box, the machine box has two rails, these are called two rails Before I put this machine in, I put this machine in, there is a snail at the bottom of it, you see, this snail catches through the table, you see, it catches through the table, then at the bottom of this machine, it has a hole, that is, I put this snail in the top of the machine, let it hold it down under the table, this snail is like this, the order is that the lantern is on top, then it comes to the bottom of the machine, it has a hole, it has a hole, it fits right here, then I put the snail in, remember that there is a lantern, the lantern is close to the table, then this snail is up, when this snail is hard, I put this snail up to keep it tight, keep the machine tight, put it on the right, put it close to the end, it will be broken, the teeth in the machine will be broken, I have to make the teeth again, not lose anything it stuck, it stuck, it stuck, it I learned how to do it, and this cover can be opened I use it every day I use it every day, I put some oil in Put some oil in the movable parts See? And this cover, you have to push it in This, I can I take this screw out I take this screw out, I push it up and down This, don't put it in I open it a bit, and I shake it up and down So it's easier Don't put it in too close, or the knife will be damaged The knife, see? If you put it in too close, the knife will be damaged See? Before using it, you have to learn how to use the guide Where does the guide go? For this machine, I use the guide I use the guide, it's the best If you use the ruler, you have to buy the 150mm ruler Don't buy the 75mm ruler, you can't use it Don't blow the machine into the guide The guide will not be stable, it will be confused, or it will be broken If you use it correctly, the machine will be smooth And the guide will be beautiful That's all I would like to stop the video here See you in the next video