形の出来た真柏を買った時にする作業とは？とや、葉透かし、舎利付、木の選び方【盆栽Q】

Hello. This time, I'm going to show you how to make a tree that looks like this. The branches are well made and the trunk is moving. If you want to make it look more like a tree, you can put a wheel in it. If you put a wheel in it, it will look more like a tree. This time, I'm going to show you how to make a tree that looks like this. So, you're going to make a tree that looks like this and make it look better. First, I'm going to polish the trunk and put a wheel in it. I'm going to put a wheel in it and put a wheel in it. I'm going to polish the trunk and make it look better. I'm going to tell you a little bit about this. At this time of year, the leaves of the tree are yellow. The leaves of the tree are yellow because the plant itself decided that the leaves of the tree last year and the leaves of the tree the year before last were not good. This is not a dead tree. It's like a physiological phenomenon that plants do on new leaves. So, there are a lot of people who bought bonsai for the first time and said, It's yellow. On the contrary, the condition on this tree is a healthy sign that the plant is reacting. So, please think of this as a good condition. The way to tell if you're going to put it in a tree is to simply say that there are a lot of new leaves and there are a lot of green parts, and there are yellow leaves in them. In this case, the inside of the tree is a little wet and the yellow part is yellow. On the contrary, if you put a lot of leaves on this tree, the inside of the tree will be wet and there will be more leaves on the tree. So, I think the best thing to do right now is to make sure that the important branches do not turn yellow. There are many ways to do it, but I have a branch like this. The branches here are brown. The branches and the leaves. I take off the green part a little. Then it becomes a ball like this. This is also a green one. It's a husk, so it's an image of reducing the amount of leaves. For example, there are two brown ones here. It's a Y-shaped line next to it. There's a green leaf in between here, so I'll take it off. Then you can see it like this. This is a husk. When you make a shelf, you want to make it fluffy, right? If you make a husk like this, it will stretch out. I'm going to use the leaves and branches that came out from the inside and put them back up. By doing this, for example, this will be the longest branch here, so if you cut it, it will shrink again. It's a way to keep the shape and size by repeating that. If you cut all the branches that come out from the inside, you won't be able to replace them, right? I think it's better to leave the branches that come out from the inside as much as possible. Is there a case where you leave it like this? On the contrary, if you leave it too long when it's a little bigger, it may die from the inside. It's a balance, but if you cut this much, it will be a big tree if you stretch it out. Leave the ones that come out from the inside as much as possible. On the contrary, if you cut off the tip, the inside will not die. I think it's a husk for that. When you think the branches are getting longer, you cut off the tip and leave the inside. That's right. It's like that, isn't it? Yes, that's right. There's a leaf that looks like it's sticking out a little bit here. This is a new leaf, and there's a growth point ahead of it. It's going to grow on top of this. It's going to grow as it is, so the branches will get fat and the distance will be longer. In the case of a new leaf like this, the shape of this tree is already complete. So it's better to pile it up. If you pile it up, the nutrients will go to the small leaves around it, and the leaves will grow as a whole. On the contrary, if you want to make the tree bigger or make it more energetic, it may be a good idea to stretch out the core like this. If you stretch it out without cutting off the core, the branches will run a lot, but the growth point will not be cut off as it is, so it will grow. The longer the distance, the thicker the branches will be, so it's better to stretch it out to make it look like a branch. In the case of this tree, the shape is already complete, so I don't want to stretch it out any more. I think there is a difference in the way of thinking. Is it a tree that wants to maintain the shape as it is, or is it a tree that wants to make it bigger than this, or is it a tree that wants to enrich the branches? Depending on that, the degree of extension of the core may change. By cutting off the core, you can control the size of the tree, right? That's right. Also, the size and length of the branches. If you want to make the branches a little stronger, you can stretch them out. You can do it while thinking about what kind of tree this is and what kind of tree you want to make. I'll go back to the beginning, but this tree has a certain amount of shape, so I don't want to make it bigger than this. So I think it will be necessary to cut off the core and control the size. Then I will cut off all the branches and the core. It's like this. I think I've cut it off to some extent. Some people do it a little more, and some people do it more. This is a sale, so I left it to some extent. Next work. This time I want to attach a wheel to this. So I'll clean the trunk first to make it easier to cut. It's quite difficult to cut with the skin left. I think it's better to show the brown layer at the bottom. You can see the fibers. So I'd like to clean up the skin once. When you peel this skin, you can use a carving knife or anything. As an image, it feels like peeling, not shaving. Is it better to use a carving knife? Do you use a brush? I use a brush, but I'll do the rough one first. You can do it like this. This is a brass brush. Are you done with the grinding? Yes, I'm done. I'm going to attach a wheel from here. There is moss around here, so I'll remove it. I'd like to see it from the beginning. In the case of this tree, there is a branch on the right side. It looks like a returning tree. I think there are various ways to make it. On the contrary, you can cut around here and turn it over. It will be a compact tree. It's more like a heart. If you have this, you'll get the impression that it's thick because it has a width. If you don't have this, it's like a heart. I think it will be a tree that is close to a branch. I think either is fine. This time, I'm going to leave it a little bit. How to attach a wheel. I want to attach a wheel to the outside. In the case of this tree, the wind flows from the left. It blows away like this. The rain wind hits the trunk on this side. The trunk is scraped, so the wheels come to the outside. That's the ideal. On the contrary, the inside is protected, so the water remains. What you have to think about there is that you want to attach a flat wheel as much as possible. It's a thin and pointed wheel. I want to attach it to the outside. I want to widen both sides. So I'm going to scrape the center. Then both sides of the side will expand. The width will be wider. When it's wide enough, I'll scrape only one side. Then the water will remain inside. I did it last time, but I'm going to scrape the center again. I'm going to scrape both sides this time. Later, I'll scrape only one side. Then I'll be able to scrape. That's what I'm going to do. That's it. So, as a guide, I'm going to scrape this part of the inside. I'm going to go in from here. If I go in, I'll hit this wheel. If I can go up here, I'd like to go like this. I'm thinking about that. On the other hand, I'd like to put it on the other side. I think it's around here. I'll go in from here. I hope I can get to this area. Even if there is a little water on the branch, If there is water on the other side, it won't dry up. So I'm going to try both sides this time. First, I'm going to scrape from the front. I don't want to go any further than this, so I'm going to scrape from the bottom. The white part you can see now is the stratum corneum. If you go to a certain depth, you can pull it. At this time of year, the water will be pulled as it moves. I'm going to use tweezers from here. This is the natural movement of the trunk. The more you put it on this street, the more natural it is. So when you buy the material, it's better to have the tree stuck together. It's better to move as much as possible. I scraped this part, too. I made a natural movement like this. If you scrape it like this, it won't affect the surrounding branches. The tree looks natural. Like this. I think it would be good to spread it slightly from both sides. At this time of year, the skin is easy to peel off. I don't want to go any further than this, so I'll cut it here. I don't want to go any further than this, because the leaves around here are concentrated. I don't want to affect it, so I'll cut it here. It's also good to scrape the white part cleanly. It's good to scrape the inside. Is it because it's easier to wrap? That's right. It's a little fat. It came off. I think it's going to be a lot more natural as long as this goes in. It's transparent, isn't it? That's right. I think it's okay to scrape this much because the water and the branches are solid. I see. I'd like to put it in the opposite direction this time. But you're going to connect two of them, aren't you? I'm going to scrape one and put it in front and back. You're going to make one, right? You can make a pretty big wheel. I can. I think it'll be a good tree. I'll do it in one go. You said you could cut the branches and make them come in. In that case, you can change the position of the water tank. On the contrary, if you do this, you can do this side. It's better to have the wheel come to the elbow. It's better to come out of the curve. I see. In that case, it may change again depending on whether you make the curve on this side or on this side. I see. That's why the point of contact is very important. It's twisted. This doesn't rotate. It's bent, but it doesn't rotate. That's why. I didn't get it at all. I want it to rotate. So it's better to have the tree twisted? It's better to have it twisted. The second wheel is ready. It looks like this. I'm holding it so that both sides don't go down. If you don't do that, it will rot. This is not a mountain tree or anything. The material is soft, so if you do it all the way down, it will be fluffy. So it's best to stop it here. This will calm down in about three weeks or a month. Then it will gradually calm down. At this time of year, it grows very fast. So I think it's good to paint the material at that time and make it white. I see. If you want to make this tree with a pattern, you can make it with a little more wire. The other one is like this. But if you drop it, it will look like it's back to the left. That's a new look. It's a tree that looks like it's close to the trunk and branches. I think either is fine. If the tree looks big, it's this one. If the tree looks big, the tree looks big. Is it a big tree? The big tree is this one. The more orthodox shape is this one. Either way, I think this tree is interesting. I think it's a good material. The taste will come out this time. I think it will be different from the impression I had earlier. That's the fun of playing with bonsai. If you find a good material like this, it's a one-off, but if you do it, you can increase the value. I see. I think you should try it. Do you cut the water from here again? Yes. Do you make one wheel? No. About two years? I think you should cut it when you think about how big it is and how good it is. So you make the water bigger and make the wheels bigger. That's right. If you like this video, please subscribe to our channel and click the like button. You can increase the value of bonsai with a really simple task. I think it will be interesting if you try it. Thank you very much. I made it like this. When you buy this kind of material, you should do this. The point when you buy it is that the trunk is moving. It's better to move irregularly. If you just cut it, it will move like this. This is because the person in front of you moved it irregularly with a wire. So, first of all, how irregularly it moves. I think it will be better if you choose something with an interesting pattern, not just a wire. And then there is this branch. This branch is a good branch with a good trunk. When you make a small bonsai, you may want to choose a branch like this. I think you can change the branch depending on the size of the object. If it works, I think it's okay to make it a little longer. On the contrary, there are times when you make a big branch with this kind of material. There are times when I think it's unnatural. I think it's better to choose a branch that fits the size of the object. But if it's a branch like this, it's okay. I can tell right away when I change the cloth. I think it's okay to change the cloth, but sometimes I think it's too clogged. However, I think most people who are looking at this bonsai tree will do this size. In that case, I think it's better to choose a short branch that fits a lot, not the main branch. If you keep extending the branch, it will be easier for the branch to get fat. There are times when it is difficult to bend or drop the branch to some extent. I think it's important to be shy. I think it's better to do it before it gets wet. In that case, you can prevent the branch from falling. The branch will definitely come out, but you can hold it down a little. If the important branch flies away, it can't be helped. If you do it, I think you will be more energetic. The point is to buy a moving tree. Buy a good-looking tree. Also, I think it's okay to buy a tree that you think is cool. If you are going to do bonsai, please keep looking at bonsai trees. It may be better to look at various good bonsai trees. There are many good bonsai trees in the bonsai village in Omiya. There are many good bonsai trees in the bonsai museum. If there is an exhibition near you, please bring your feet to such a place. First of all, if you can intuitively feel that this tree is cool, you will want to get closer to that tree. Then you will have the idea that this tree is similar to that tree and can be made like this. First of all, please bring your feet and look at a lot of good bonsai trees. I think that if you look at bonsai trees, you will be able to make a good tree. Even if you want to make a good tree, you have to know how to make a good tree. I think it would be nice if you could buy bonsai trees while thinking about that kind of thing and work on them. Yes. It's like Kanta's bonsai class. Is it okay? I think it's okay. I think there was a comment saying that the last video was my Bible. Thank you very much. I think it's easy to understand and good. There is also a subjective part. It's important. If you have any requests, please let me know. I will tell you if I can. Do you have a special field? If this explanation is good, I will do it. Yes. That's it. Thank you.