This is a show, I don't like this shit out here.
The white one wants to work, we work with the white one, go ahead.
This car is the second time touching this, this, this, whatever body man name.
Go try your car, go try your car.
Go try it, go try it, go try it.
I don't want to try it, I don't want to waste the fuel, man.
Watch out for Humvee, I can pass you.
I'm okay, I think I'm okay.
Are you sure bro?
Yeah.
Hold on guys, don't get out yet.
Let me check what you're going to get.
You okay?
Yeah, yeah, yeah.
You okay?
I'm good bro, I'm good.
What do you want?
I'm good.
Fuck bro.
Hey, turn it off, all the emissions, turn all the emissions off.
Humvee, where you at?
Yo, you good bro?
Yeah, I'm good, I'm good.
You good bro?
You're leaking gas, come on, cut off all the power, cut off all the power, you're leaking gas.
You're leaking gas, cut off all the power, cut off all the power, you're leaking gas.
Relax, relax, relax.
Relax bro.
The key is out of the ignition.
Flip it, flip it, flip it.
My name is Ricardo from RPT Creations.
This is my 1995 Honda Civic Hatchback.
It is 4G63 powered, all wheel drive, named Honda Bishi.
This build has been going on for about almost four years now.
Unfortunately, as you can see, we had a tragic accident with it.
So I would say approximately a month and a half ago or so, we started this whole north versus the south thing.
Someone that you may know of, Frustrate, Danny Frustrate, has an all wheel drive Civic, two actually.
Somewhere along the lines, my name got brought up for also having an all wheel drive Civic.
So we were put on a live to try to set up a race between us two.
We exchanged conversations and we set it up to try to meet halfway to get this race done.
Unfortunately, it was just too far of a drive for him to take off to be able to just make it one race.
Me and my team, we decided to all get together, plan this trip over a thousand miles down to Florida.
We communicate and contact that we were here.
We set up a time and place to, you know, make this happen.
And we ended up, we were supposed to go to this one place, but we just couldn't agree on it.
Respect to Danny, he actually paid our expenses to drive 500 more miles to a location, a closed course that he felt comfortable racing.
We get down that night, we arrived to the spot.
A part of me did not like it.
I was under the impression that it was much safer and much wider.
We were supposed to race a quarter mile.
We ended up short in it so we wouldn't put ourselves even at more risk at higher speed.
We came down, like I said, we were supposed to race his street all wheel drive car, which to me was more of a competition for mine.
He ended up having some issues where the car broke.
He was no longer able to race it.
So I kept my word and I told him, you know, originally we had spoken, I would race the white car.
He said it was too much.
So if I had beaten him with my car, that I would rerun him with his race car.
So I ended up sticking to my word.
The white car was no longer operational.
So they ended up unloading the race car and we lined those two up.
Unfortunately, when the race kicked off, we both took off.
We're side by side, first, second, third gear, top of third gear.
Something happened with this car.
It cut off.
Thankfully, that happened because I must have pulled, I would say, about approximately two cars in front of him.
And my car got pulled to the edge of the road and I hit dirt and grass and my left rear tire ended up kicking out and I lost control.
If you watch the GoPro footage of the end car, you can see I did my best to try to counter the steering.
Unfortunately, high rate of speed, you lose control nine out of ten of the times, it's too late.
The car just flipped over.
I'm seeing trees and woods.
First thing I can remember is my rear end getting caught in a tree.
Next thing you know, I'm upside down and my passenger side hit one of the bigger trees and that's when the car came to a stop on its roof.
Thankfully and fortunately for me, and this was a big eye opener and hopefully for everyone that's watching, it is also.
Thankfully, I had the proper equipment in the car.
I've actually never even raced this car without all the equipment.
And even though this wasn't street racing, we were off a public road.
However, it was still a street environment.
I've never taken off my NHRA stuff.
It still had the window net.
It still had the parachute.
While I'm upside down, I had all the ethanol rushing into the car.
Had I not had that mild steel box around the fuel cell, things could have probably been much worse and probably ignited.
So my point to all that is, you know, definitely safety, safety, safety should be considered when we take these cars at these power levels, especially when not on an actual prep track surface.
So like I said, thankfully for the cage, it did its job.
The passenger side bar did take a pretty big hit and had it been in the driver's side, it could have been much worse.
I probably wouldn't even be here talking on this interview, but we got the best possible outcome.
And at the end of the day, the cage did do its job.
It survived the complete rollover.
The roof is mangled.
However, if you look at it from the inside and if you look at me, I walked out with very, very, very minor scratches and thankfully no broken bones.
I was able to kick my way out of the driver's window and crawl out and walk away from the scene.
So I'm very thankful.
And again, a big shout out to KG Fabrications.
He is the man, Cody, behind the cage that ultimately saved my life.
So very big thanks to him.
And I definitely owe him a beer one day.
We'll give you a walk around the car, starting with the engine bay, show you some of the damages.
For the most part, the front end did not get too severely damaged.
I mean, the most we've seen so far, we broke the cam center.
I think the turbo, since it's a big van, it would shift when it flipped on its side and it just caught the cam center and broke it.
Other than that, as far as the engine compartment, just the right front clip, the tubular radiator support got crushed in.
And that's so far the only damage that we found under the hood in the front clip.
The intercooler is still intact.
The intercooler piping, all four rims and tires are actually not even scratched, shockingly.
The whole passenger side is what took the majority of the hit.
I mean, if you look at the passenger side floorboard, it's up over into the tunnel, into the center of the car.
The e-brake is crushed, the staging brake is crushed.
We had to remove the passenger side bar.
We actually ripped it out to be able to release the e-brake and get the car rolling.
I mean, here we got the fuel cell.
This is the part that I mentioned, once it took the first hit on that tree, it actually punctured right through, leaked out all the fuel.
The seat's twisted.
The drive shaft is actually ripping out of the carrier bearings, and it's twisted as well.
The roof buckled, I mean, that's all caved in.
But the roll cage, again, did its job.
So I'm going to pull out the seat, that way you can get a better look at inside and see what happened with the floorboard and the chassis.
So if you get up in there, you'll actually see how badly this thing took a hit with that tree.
Here in the rear end, you can see the other portion that got smashed in.
Again, the fuel cell was actually sitting right inside of the trunk.
And we did have the fuel cell box cage to protect it.
And I think that's honestly what helped prevent the thing from sparking.
But everything in the rear end, the whole subframe, everything is pushed in, it tore the axle boots from rubbing up on the subframe.
As far as the control arms, the forks, the trailing arms, I mean, from what the naked eye can see, it looks like everything is straight outside of the chassis.
So a lot of the stuff, I mean, a lot of the suspension and drivetrain still looks like it's salvageable.
But we wouldn't really know exactly what tweak they're bent unless we fully took it apart.
But for the most part, I mean, the driver's side has obviously got scrapes and dents.
The driver's side door still does open and close.
Yeah, I mean, that's pretty much it.
I mean, overall, the chassis and the body is completely destroyed.
However, there's still like a ton of salvageable parts, thank God.
We sprayed some starting fluid just to get the motor running.
And was hoping that there was no issues with the engine running upside down and not having oil pressure.
But we did pull the log, it shut off about three seconds once it rolled over.
And we fired it up, we confirmed there is no knock-in, so thankfully, you know, the engine survived.
And that's pretty much it.
That's pretty much it, I mean, as messed up as the chassis looks, it still does roll forward and back.
So, I mean, overall, not too, too terrible.
So going way back growing up, my father was a mechanic.
He's the one that introduced me and my brother into the whole car scene.
We were wrenching on cars and working on them for as long as, you know, I could remember.
I would say that is what grew my passion into the cars.
My father was also like a big fabricator.
He was always trying to think outside of the box, always trying to do something different and weird and creative.
I've always been known for, you know, just putting stuff where it doesn't belong, basically.
So, you know, any different swap that you can think of, I was putting it in different chassis.
When I first created my Instagram page, for those that actually remember me from, you know, four years ago.
It used to be a Ford G63 powered.
My first crazy build started off with a 92 Eagle Talon.
It was turned into an exoskeleton car.
It still remained all-wheel drive.
And that's where a lot of my following and my name, you know, originated from.
From there, you know, I had an MK4 Supra.
Then I got rid of the Supra and got this Civic.
That's when this Civic came into play.
So one night, me and a couple of friends got together and we were trying to come up with some ideas.
Kicking it with one of my buddies, Adam.
We're, you know, we're big DSM and Evo guys.
We, well, he mentioned that we should do a Ford G63 swap in it.
And, you know, I laughed, he laughed.
But then he got serious and said, no, we should really do it.
So we ended up leaving off the night with me telling him, you know, find me a swap that's affordable.
And we'll give it a shot.
Next thing you know, the next day, he sends me text messages telling me that he found a complete swap out of an Evo 8.
I had to stick to my word and do it.
We ended up going to their shop with an engine hoist.
Came prepared.
And sure enough, it was a clean swap.
78,000 miles out of an Evo RS.
We got the complete lawn block, transmission, transfer case, wiring harness, basically everything we needed.
One thing led to another.
We ended up picking it up.
We stripped the single cam that was in the car.
And from there, I just started, you know, I put the lawn block on a pallet.
Wheeled it under the engine bay.
Just started taking some measurements, seeing what we had to do.
And sure enough, we had a Ford G63 powered Civic.
As a lot of people may have seen, I've also done a lot of, a few all-wheel drive Mini Coopers with case swaps.
I also am the engineer and designer for the case swap kits for the Mini Coopers.
So I've done a ton of those.
We've had a K-Series Mercedes along the ride.
A few case swap MR2s.
And leaving off with the most recent now is an all-wheel drive SRT4 Neon.
All those builds, there's quite a few that I'm leaving out, but, you know, that's just an idea.
What actually inspired turning this, you know, full-time into a business was actually my brother.
Five years ago, he had a tragic accident as well, a motorcycle accident.
We were always big into the cars, motorcycles.
And once he passed, I used this platform as a way to, you know, pretty much use it as a distraction to, you know, heal and cope with his loss.
That's where all the crazy builds started happening, and I actually named the business after him.
So his name was Rafael Felipe Teixeira, and that's where RPT Creations came from.
So all the creations were all inspired through him, and this is what I do.
I also got to give a huge thanks to the whole team that came out with me.
You know, thanks to ARP, Automotive Racing Productions.
He didn't hesitate at all to grab all his camera, hit the road, go 1,500 miles and document the whole build.
And, you know, the travel.
Shout out to my buddy Danny for being the reason for coming out in a huge semi and a trailer, loading up all the toys and taking the ride.
And taking his time out from work.
Also, Albin that came along for the ride.
Buddy Brown.
And like I said, it's been one team, one fight, the whole entire ride.
And although what happened, we're still going home with a smile on our face, and we're still going home with a running car.
I also got to give a big thanks to my tuner, Eric Medina, also known as YoSolo.
Honestly, I've been working with him with every single one of my builds.
He's been there tuning the car, and you guys have seen how this thing has performed over the last couple of years.
Also, Rafe from RRT Motorsports.
Had it not been for him, I mean, he's built this thing from the ground up.
Real thankful to have everyone on board.
There's been a lot of people also, you know, that I feel like I'm going to leave out.
But, you know, a big shout out to the Driveshaft Shop.
Alpha Injection Clinic.
My buddy Jeff, STS Auto Design, helping me with all the fabrication on the car.
I mean, again, I'm sure I'm leaving a lot of people out, but I just wanted to hit the key people that have made Honda Bishi what it is today.
So to close this out, I just want to say thank you to the TRC team and Javier for making this possible.
Although it is the end for Honda Bishi, it's not the end for me.
I'm thankful to be here, and I'm going to leave that on that note.