On this episode we're back with another sick feature from our TRC/Motive video downunder tour, we're at Croydon Racing Developments in Sydney to check out some of the BADDEST cars to come out of Australia.
It's insane!
Hell, dude!
What the f-
And you know, the thing is, you're happy but you never consent.
We know we can go quicker.
On something like this, how much boost are you guys going to try to-
Upwards of 100 pounds in nitrous.
We've got a Precision 110 on it.
You're going to be 3000 plus horsepower.
Exclusive here.
TRC exclusive, right?
Yeah, pretty much.
No one has seen this yet.
You're the first to see it.
What's up guys?
Tom here from That Racing Channel.
Back for another feature down under in Sydney, Australia.
Behind me, we have Freud Race Developments, aka CRD.
This is one of the leading performance shops in Sydney.
They're well known for their R32 GTR, June 2, which is the quickest GTR in the world.
We're going to check out some of the street cars, we're going to check out the new race car,
and some of the new things that they're developing with the RB platform.
Let's get into it.
Omar, what's up, brother?
How are you, mate?
It's good to see you, man.
You too.
Just a couple days ago, we were out at Kuta, and you guys were out there having fun with
all these RBs.
And now we're touring the shop, man.
You guys have quite the facility here, brother.
Yeah, there's a lot going on here at the moment.
A lot going on.
I mean, look at the sea of GTRs there, man.
But yeah, walk us through what you guys got going on.
No worries.
Let's go.
So this is the street side, dailies, projects.
So I think this is the car here?
That's the car there that you will be going in a little later.
So this is it.
Billet block, 3.2 litre, 8385 precision turbo on it.
So this here, right?
So I'll show you guys here.
This here is like a pretty well-dialed street setup here.
Correct.
Yes, it is.
External pump.
Single, yeah, silhouette sump.
So this was the old setup out of Dave's, obviously, the other car, which Dave ran the 8.1 with
it, with the manual.
Factory wheels.
It's still on low boost, this, because the owner's never driven anything like this.
So cons give it to him on gate pressure.
I think it's probably a little bit more than gate pressure now.
It's on about 25, 26 pound.
So just to get him to get used to it.
So we got some Mickey Thompson.
What is this, like ET Street or something?
ET Street SS is on there, but at the moment...
That's what I run on my car back home.
That's it.
So we'll see where the limit is and go smaller wheels and bigger tyres a little later.
I'm sure he wants to race it later.
He wants to cage it and stuff.
Oh, yeah.
But he wants to do some street stuff first.
Interior's pretty stock, apart from it's got a 12-inch Motec dash.
With a Samsonis Foster Sequential.
That seems to be the trend with you guys, right?
Everything that you guys are doing is a pretty good example of any platform, you know?
It is, yeah.
I mean, we got 34s, we got R35s, we got Evos.
And I think this might be the one that I rode in at Kuta.
That's it.
And this was a dream.
This thing, I hadn't ridden many Evos that remind me of the RTRC Evo sequential car.
I think this is Rob's pride and joy.
That's Rob's daily, pretty much.
He calls it his daily.
Yeah, it runs so mint, man.
It's like 76-85.
I couldn't believe how well it drove on that turbo.
You guys honestly put so much pride into all of your builds and I absolutely love that.
I've seen that as, in general, as like an Aussie thing, you know?
Everybody puts a lot of pride into it, the motorsports and all that.
It comes out to our customers as well.
They all sort of take a lot of pride in their vehicles.
And they want to outdo each other as well.
They see that, they want that, they want better.
So you're always sort of stepping it up each time.
So every time you build, the next one you do, you know you've got to step it up.
It's a slippery slope, right?
It is.
Bottomless pit as well.
We all know.
Exactly.
Dude, this thing is sick.
This is just like whiskey setting.
Yeah, yeah.
20, maybe 24 pounds.
This thing f***ing moves for whiskey.
That's good.
That's fun, bro.
It's interesting.
Transmission.
It's nice, bro.
That's how well it does on this turbo at that boost, you know?
This is like just cruising, like perfect street mode, you know?
Doesn't want to kill you, you know?
Dude, my man.
Thank you.
That was my first Aussie GTR experience driving a GTR in Australia.
Yeah, thank you.
Can't thank you enough, brother.
Thank you.
Thanks, man.
This thing's f***ing insane.
F***ing hell, dude.
What the f***?
Rob, so good to see you.
Javier, how are you, man?
Thanks for having us.
No, thanks for coming, man.
Before we left, I had to come see this.
It's called Zeus, if I'm not mistaken.
Zeus, yep.
Well, we decided a couple of years ago that we'd pretty much gone to the limits of June 2.
That's been my streeter and the quickest GTR in the world by none.
So, we've developed that engine package and been driving that now for a while.
We thought, okay, we're two from here because we're still developing the engine package
and we know we can get a lot more out of it.
And the only way to go forward is to build a ProMod that we can show off what we're really made of.
And at least with this, we can take on the world stage for full door ProMods.
We hooked up with the guys at SCF Racecars, sat down, started planning, and this is the finished article.
Craig's one of the best chassis builders in Australia.
And we sort of nutted out a pathway that we know that we can run a mid-five in this chassis.
It's just a matter now of power delivery, obviously engine combo, and the setup.
You guys recently got it painted and everything.
Airbrushed.
Airbrushed, yeah.
You guys recently got it airbrushed and it's immaculate.
It came out so good.
We started with a body and it was great, but we thought, okay, for where we want it to be
and obviously how far we want to push the car,
there was a few changes we needed to make.
So we decided to build our own mould.
We went to a friend of ours in Melbourne, Top Stage.
He developed a mould at 115 inch, obviously big enough to take the biggest wheel and tyre combo that we want in the rear guards.
Just the little perks that we really had, even the way the car sits, the rake, the way we wanted it to, obviously.
Similar to all the big ProMods and how they run them.
Obviously still running the six cylinder import platform type racing that we want to do.
Part of where we ended up is obviously a full carbon design body.
And when we saw it, we were blown away.
We thought, nah, man, we can't paint this.
So we just clear coated it, airbrushed it.
It's a traditional R35 shape anyway, so it wasn't too hard to make it look really cool.
And being that we're true to Nissan and the RB platform, it was only right that we ended up either with a shape,
which is a 32 or a 35, which is the most modern GDR that's around.
And yeah, this is where it ended up.
We're very happy with it.
And we've sort of thrown everything at it.
Anything that is the latest in technology in drag racing, I think we have it here.
Now it's a matter of making sure that it all works well.
Even the race tech seat, obviously from a safety perspective, the extra bar work that we've done, the stability side of it.
I think it'll be okay.
It's just a matter of getting out there and shake it down and see what it does.
Amazing.
I can't wait to see this thing at a World Cup finals, I hear.
Yeah, man, 100%.
We're going to bring it to the States.
Did we just spill the news here?
Yeah, that's it.
Look, if not this year, next year for sure.
Let's just get it out there, see what it does.
And the quicker we can get it to the States, the better.
We'd love to race there.
Well, let's go peek over at June here, and that's the OG, you know?
It is, it is.
At the moment, the engine's out because we're just waiting for a billet sump to come through from Herman.
Herman's done a lot of PRP, has done a lot of development on some parts that we've used on the ProMod.
We kept breaking the front driveshaft in this at the 11,500 RPM that we spin the engine to.
The prop shaft gets out of balance and it breaks everything, so we decided to develop a billet sump.
Hopefully it's a lot stronger and it can cop the load that we throw at it.
The first thing I noticed just kind of walking around this car is it's got a nice little wider look here.
Yep, so it's got our own custom wide-body carbon front and rear.
I don't know how well you'll be able to see it on camera, but you can see it's like, you know, you got that.
It comes out over here.
Yeah, 275, 12-inch rims.
Was that a big jump for this car to do that and get that tire on it and the big wheel and all that?
Especially to make it look like it's a traditional R32.
Like, we still got the standard wing.
We don't have bonnet pins on it.
If you looked at it from afar, you'd think, yeah, you know, this is just another R32.
I'll tell you, everybody's mind was blown in the States when they saw this car do what it did.
And then you just, you know, you kind of just look at it and you go, it kind of hurts your brain for a second.
It shouldn't be doing what it's doing.
What did we just see? Like, oh man, I mean, just look at this, right?
It just looks like an R32, you know?
So we've closed off all the air ducts at the front, just obviously for the mile an hour that we run.
So what was the quickest and fastest time?
So we've run a 6.37 at 224 mile an hour.
And you know, the thing is, you're happy, but you're never content.
We know we can go quicker.
We know we've got the power to boot and like, there's heaps more we can throw at it.
But the problem is, we can't get the power in quick enough, you know, with this chassis.
It just twists and carries on and breaks ****, so.
This poor chassis has been holding on for dear life.
I don't even want to show you underneath, because you'll get scared.
It's all buckled and mangled and twisted, yeah.
But it's been to the start line more than 2,000 times as well.
We've been racing this now for nearly 20 years.
Just seeing it develop through the years, I mean, I've watched this car almost since the beginning.
And it's so cool to be here and seeing it in person.
He started life with a manual.
And so, I think one of the quickest.
I know a guy that might have some footage of this car over the last two decades.
I'm sure you do.
Where did you watch this car again, Javier?
Motive DVD.
Yeah, that's how far back.
Motive DVD, yeah.
I think it went 10-0 at Cootamundra, our first GDR Challenge.
It did, at the first one, yeah.
And we all thought that was amazing, that 150.
You know, it's been a long path.
It's been great.
You know, I've enjoyed it.
We've had our highs and lows, you know, like everything in drag racing.
But we're committed to the scene.
And, obviously, what we develop here sets the scene for everything else that happens in the shop.
And, you know, customers' cars and all the rest of it.
And, you know, it makes everyone happy.
So, obviously, this setup's going to be changing here soon.
What was the setup when it did the record?
It's our RB30 Billet block with custom JHH race head that we've developed with the guys there.
24-injector ID2600, ProMod 110 V-band.
That's a massive turbo.
Yeah, yeah, yeah.
So, the stroker kit, the 3.2 is a wide journal, you know, custom job.
And it holds up very well.
You know, we don't really have any bearing issues.
We don't have any strength issues in the crank.
If anything, it can cop another 1,000 horsepower, you know.
So, it's just a matter of us feeding the power in, pushing it harder.
We've got a bigger turbo on the ProMod.
That's a 110-114.
This is just a 110-108.
So, we're going to be able to get another 20 pounds of boost, hopefully, out of it
and just see what it does at that level.
Probably, I don't know, what, 80-plus pounds of boost on this thing?
When we ran the 637, okay, it didn't have the water-to-air yet.
It had an air-to-air intercooler.
We ran, I think, 90 pounds plus a sh**load of nitrous.
Yeah.
We were using the nitrous to cool the intakes down.
Look, it's hard to gauge.
You can't really do a horsepower reading, you know.
But, yeah, look, it loves the nitrous, you know.
It works well with it.
We know we can throw a sh**load more nitrous, you know.
And that platform can take it.
So, from the get-go, off the launch, bang, all the way down,
we're going to be feeding more and more nitrous in as we go.
It's going to be a good ride, and hopefully, it's going to be stable
and do the job for us.
So, now, we've got water-to-air, and we have backed up a 649, I think,
without nitrous.
And we ran 637 with nitrous.
So, we think there's a 6.2 in the car, if we can get the front end
to stay down, and we can get it all together and make it work.
We've seen this car many times just pointing straight at the sky.
That's what it does.
That's what it's known for, right?
The wheelbase is short.
It's stock.
Power delivery is the challenge because it's on a 275,
but it hooks up hard enough where it does throw the front end up.
And the chassis is still stock.
We don't even have any connectors in there.
There's nothing in the chassis that's different to any other R32
that rolls off the factory floor.
And that's why it's sort of battered a bit because it does bend
and carry on.
It really does need to be stiffened.
We're still running the standard engine mounts.
We're not even running, like, mid-plate and front engine.
Really?
Yeah.
Look, some of the guys overseas, the Supras and White Rice and all those cars,
I mean, they've got not full-chassis cars, but they've got tube cars
to a point.
You know what I mean?
And that's what you need at that level.
We're happy that we've achieved what we have, and it's been a hairy ride
on the way.
But, you know, we know it's got a lot of potential.
This car here is JJ's.
It's a – you guys call it a 240Z.
We call it a 200SX here.
So this here, we've pretty much started it from ground up.
The old setup was a – RB is in it as well.
He had a sequential Samsonis in it.
That was a 2.8-litre Schroeker kit in it.
So he raced that for a bit.
He ran an 880 with it, with the manual.
And then we put a slightly larger turbo on it,
one with a bigger setup on it.
But then it split a ball.
So that's when he sort of made the call, all right,
let's go build a block.
The spicy stuff.
Yeah.
Oh, man.
And these are so much lighter than, like, the 32s.
Yeah, there's a big difference from these to the GTRs.
This thing's going to be rowdy, man.
Yeah, it's going to be fun.
So this one here, we're aiming for around the 2,000 horsepower mark.
Not only 2,000 horsepower, big power stuff, but, I mean, honestly,
I don't even think the camera's going to do this thing justice,
but this is probably one of the cleanest 240s I've ever seen.
Yeah, this car is pretty wild.
The customer is very anal.
It's got to look really good, but it's also got to go fast.
PPF the whole car, wrap the whole car, just to protect it as much as you can.
But, I mean, literally on the vehicle, inside the vehicle,
everything's been restored.
Should we throw it up in the air and check out under there?
Let's go.
Because I took a peek earlier, and it's nice.
It's good, man.
Let's get it up in the air and show the people.
What size turbo you said that was again?
It's a 98-millimeter ProMod.
You guys don't mess around with your turbos.
Everything's got a ProMod on it at this point,
and you're like, yeah, full street car.
Exactly.
So where do we start under here?
Because it looks like just about every nut and bolt has been changed on this car.
Even to the fender.
Oh, my God.
It's every nut, bolt, clip, mold on it is all brand-new OEM stuff.
Subframe's coated.
It's dry-sumped as well.
Brand-new lines, fittings.
It's got a turbo 400 in it, which we've converted to.
It's got an 8.8-inch rear diff in it to hold the power.
But the whole underbody's been redone on it.
I mean, look at this.
This is just like pinnacle.
Look at this, man.
It's so good.
Yeah, he's really particular with what he wants.
That's a neat deal here.
That's like a boost bleed-off we use for it.
Different ways of controlling this.
We're getting old secrets.
Well, I cannot wait to see this thing done.
Say probably in the next week or two, the car should be fired up and ready to go.
What else do we got?
I mean, I see a lot of infamous cars on the internet here.
I mean, we got like, I think that's War GTR.
We got Goat, Thor.
I mean, where do you start?
All right, so everybody definitely knows this car.
Yep, the infamous War GTR.
What's the deal with it now?
Is it a different owner now?
Yeah, different owner.
So Adrian, LMCT, bought it off Anthony.
Then he got it raffled off.
He bought it originally to raffle it off.
He raffled it off, and then he just couldn't let it go.
So he bought it back off the person that won it.
He bought it back off him, and yeah, he said, let's go harder on it.
I can tell why.
I know why he did it, right?
I know why, because just look at it.
It's perfect.
Yeah, it's a beautiful car.
It's a V-spec too, and it's a wild car.
So it's a V-spec too.
V-spec too.
Is this factory paint?
Factory paint.
Is that why it looks this way?
Because I've seen a couple of white R34s, and the paint looks different on this one.
That's right.
There's a few different colors.
Some of them are straight white.
This is a pearl white.
So there's two different ones.
But yeah, it's a genuine.
Obviously, I think the bumper has been painted before and stuff like that.
But yeah, it's original color.
Awesome.
Mainly original.
Engine bay has obviously been painted before.
So it's the same motor as when Anthony had it, a 3.2 billet block with a full race head.
Cold side is still the same.
We've just gone to a ProMod 88 with titanium dump pipe, titanium exhaust.
He's gone to a Sienzonis RS90, but we're going paddle shift on this one.
And it's also got an 8.8 inch rear diff.
Anthony's problem before was just breaking diff every couple of passes, trying to get
that number down.
But yeah, now it's got sort of dry sumped as well.
That's awesome.
What's the next thing we'll see this car at?
GDR Festival will be there.
This is GO32, R32 GDR.
It's the quickest manual GDR in the world.
It's around a 790 at 188 mile an hour at the track.
Now it's got an 8.8 inch diff in it.
It's got a bigger diff in it to handle the power.
So yeah, combo's still the same as when it ran a 790.
It's just anything with those changes, it's got a different plenum on it now.
I rode in this car at Kuta.
Boy, I should have brought my diapers for that one.
It's a wild car, man.
It's pretty brutal to drive.
When that boost comes in, it comes in.
It's pretty wild, man.
When it's on, it hits like a hammer.
Nah, she's pretty cool.
Again, it's a very unique car.
He's really particular with how he wants things done.
And everything in it is very neat.
And the same thing is similar to JJ.
Everything's got to be new.
You mind if I take a look inside?
Yeah, of course.
I've got to see a lot of the 32s here.
And this has got to be one of my favorite interiors, I would say, for a 32.
How it's just all redone and it's so clean.
Yeah, so it's actually still a wet sump, this car, as well.
So it's billet block with an external oil pump.
But it's still the same wet sump it was with an external oil pickup.
With a billet block, you want a bit more oil pressure.
So that's why we've gone for the external oil pump.
Kept it with a wet sump.
And then, so this one's pretty much, they're almost twins, right?
Yes.
But it's got an automatic, right?
Yes, this has a turbo 400.
It's gone automatic.
Similar, almost identical.
Motors are identical.
Different plenums and just different size turbo.
This has a 94mm ProMod on it.
Okay.
Yeah, a little bit more forgiving with automatic, I guess.
Yeah, it is.
Especially to get things with the power delivery.
So with the manuals, it's either on or off.
There's nothing there.
Whereas with the auto, you have a converter to soak up a bit of the violentness.
So it's good.
We'll have to play a clip.
I think Romeo, one of our guys, rode in this at Kuta.
Yeah.
And he said it was a wild ride.
I saw this at Kuta.
He was ripping it.
I think you guys recently finished that one, right?
Correct, yeah.
This is PT Evo 10, which we just finished up.
Now, I'd make about $1,000 once we've dialed it all in.
Sequential, right?
Yes, sequential.
It's got a PPG sequential in it.
It's a 2.2 litre stroker in it.
Sleeve block, Magnus manifold, dry sump.
So it's got all the good gear in it.
I've learned you guys are either all or nothing, huh?
Pretty much.
We've got the customers who like to go the full way.
I love it.
That seems to be the Aussie way.
It's like you're going to do it right or you're not doing it.
Exactly.
It's actually really torquey as well, this car.
It's very promising.
So this is an Aussie mobile.
It's a VL or something?
This is an Aussie car.
This is a Holden Commodore.
It's a VL.
They come standard with RB30s in them.
So RB30s have got the single cam in them.
Very similar to the RB26, obviously, except the twin cam 2.6.
This is a three litre single cam.
So it's currently the quickest single cam VL in Australia.
Oh, no way.
He's running 690 at 199 miles an hour, roughly.
Wow.
This thing goes 60s?
Looking back here, I'm like, oh, you know, it looks fairly tame.
If you change the wheels and tires, I'd be like, oh, it's a Sunday cruiser.
And considering that's on a 255, we ran the 690 as well.
So it's a 255 radial.
Wow, dude, this is sick.
255 radial.
So now we're going a twin cam head on it now.
PRP goodies?
Yep.
So we're putting a new setup in it now.
We're going twin cam head with an RB30 with 3.2 litre.
Pretty much the identical combo as what we've got in June at the moment.
That's what's going to go in it.
So what's the goal?
Some mid 6s or something?
Deep into the 6s.
As deep as we can go.
So what does something like this weigh compared to June or something?
Are they lighter?
They're around the 1,200-ish kilos.
Whereas compared to a 1,450, 1,480.
2,700 pounds or something?
Yeah, something like that.
So not only do we have some drag builds, right?
You guys had street builds in the other room here.
Yeah, we've got street cars, drag cars,
and these are circuit as well.
So we do do it all.
This is Rob's Evo X.
Yeah, circuit car he's bought recently, which we just finished off.
We got it to us probably three quarters finished.
We just had to finish a few lines of fittings and some wiring on it.
Oh, this looks fun.
Yeah.
He drove it once at Eastern Creek for, I think it was a half day test,
which he's never driven a circuit car before in his life.
And then from there, we went straight to Bathurst,
which is one of our big circuit tracks here.
A very big wild track.
And he took it there, and yeah, he fell in love.
He absolutely loved it because it's the funnest car I've ever driven.
So this one's catching my eye back here.
Yeah, this is Drew's R34.
Probably more looks like a time attack car, but he does laps,
so it's not just all-out time attack, straight power.
So we built it to be obviously reliable for him,
so he can do a lot of laps at a lot of places.
But he still enters world time attack and does all that sort of stuff.
A lot of carbon, a lot of aero, a lot of downforce, right?
Yeah, it's got a bit of everything.
It's got power.
It's got an RB, it's a 2.8 liter.
Yeah, originally it was the RB26 with a 2.8 liter stroker in it.
Well, you know, you don't need all the horsepower in the world
to do the circuit stuff, right?
No.
But even, I mean, I imagine something like this still makes, what,
600 or 700 horsepower or something like that?
Yeah, this one here, about 700, 800 horsepower.
700, 800 horsepower.
So this thing's an absolute animal.
I mean, this thing's a rocket ship, I bet, around a circuit.
For something to do lap after lap, yeah, it definitely is.
I'll have to see if you guys have any videos.
Yeah.
Is the RB pretty reliable on the circuit setting?
Yeah.
What does it take?
Is it a dry sump deal or, you know, what do you guys do?
Oiling's the most important thing, obviously, with the RBs.
So, obviously, the stroker kit's good.
It's got a liter, a 2.8 liter in it.
It's got all the strength in it.
Oiling's the main thing.
Dry sump.
As long as the oil pressure's there and she's good.
You do lap after lap.
It's got an Albans paddle shift in it.
So, Albans all-wheel drive paddle shift.
So, yeah, it's still all-wheel drive.
Some people will obviously go rear-wheel drive with their cars
when they go circuit, but this is still all-wheel drive.
Oh, man.
This is probably a dream to drive around a circuit, I can imagine.
But this is, yeah, this is a serious, serious deal here.
The circuit stuff is a whole other world.
It is.
It takes a lot, obviously, to drag race at these levels,
but the circuit stuff, I mean, that's...
The circuit, you need it to survive lap after lap for minutes, not seconds.
Exactly.
So, obviously, there's different forces.
You've got sideways forces compared to, you know, you're taking off for launch.
Most people, it's obviously a full-time deal to run just, like, a drag-specific shop
or a street car-specific shop.
That's right, yeah.
And a circuit shop.
You guys are doing all of them, like, probably 30 cars out there,
I think, waiting to be worked on, too.
That's right.
So, we've got quite a few cars, obviously.
There's a lot of them waiting on parts or vice versa, waiting to be worked on,
waiting to be finishing off tunes or stuff like that.
So, you guys are staying busy.
Keeping busy, mate.
Keeping busy.
Love to see it, man.
Love to see it.
Thank you.
So, up here, obviously, we've got the engine room.
Full climate-controlled room.
Doesn't turn off.
It's on 24-7.
I'm going to have to put my sunglasses in here.
There's so much billet everywhere.
Yeah, there's a bit of billet going on at the moment.
See, we've got the special one here.
This is for a…
This is the first of many motors which will end up going in Zeus.
That's the first one.
I've got the second one there ready to start assembling.
It's pretty much a tried-proven engine package, which we're running June.
We're now putting it in a proper chassis.
The only thing different, really, with this is we're running with a PRP trigger kit
as well as the new billet sump with the integrated daily pump on it.
It's a Nitto 3.2 litre, which we've been working with Nitto extensively
for a long time to make sure we get a rotating assembly
that handles what we want to throw at it.
And it's been faultless.
Everything Nitto has done over the years for us has been unbelievable.
And second to none, that's what we use.
The engine package is something we have developed with JHH.
Again, something which we've been sort of slowly tinkering with
and evolving to get it where we want it.
And it's well and truly proven that it's got 224 mile an hour in June,
which the chassis is nowhere near where that car needs to be.
So there's promising sides with this combo.
Something like this, I mean, this is like your bad boy race motor.
Head work, I mean, what does that look like?
It's full CNC ported head.
It's got on dry deck, obviously, camshaft combo that we feel we need.
Arrow buckets, all the usual bits and pieces.
So custom valve springs, custom valves.
Yeah, there's not much off the shelf in this motor
other than really the stroker kit, to be honest.
So on something like this, how much boost are you guys going to try to put?
Upwards of 100 pounds.
Really?
Upwards of 100 pounds in nitrous.
What turbo do you want?
We've got a Precision 110 on it, but we're looking,
we've already got a few sort of plans to go bigger than that as well.
So if the 110 can't give us what we need,
then we've got some backup plans ready to go.
That's moving a lot of air.
Yeah, definitely a lot of air.
Definitely a lot of air.
What are your, I mean, I guess, what are your goals for,
what do you think this thing's going to be horsepower wise?
Hit a guess, obviously.
Man, honestly, we don't chase too much on the dyno what it does.
We sort of look at mile an hour.
For me, something like this, this combo,
you're going to be 3,000 plus horsepower.
It needs to make that.
No ifs or buts about it.
So it needs to make three, three and a half.
We'll really have to be up there with the 2Js, you know,
running 260 plus mile an hour.
So if it doesn't do that,
then we've got to put more boost into it
and see what we can do to make that happen.
So this is a billet block 3.2 litre, which is going in a R34 GDI.
This one will be getting a ProMod turbo.
It's got a Nitto 3.2 rotating assembly.
Yeah, this setup will be good for around the 2,000 horsepower mark.
So really the main limiting factor is the conrods.
So when you get over that,
you really want to start going towards alloy rods.
This is a wet deck block as well.
So street use, we try to stick with a wet deck block.
You get obviously better water flow into the head,
better cooling properties,
keeps your combustion chamber nice and cool.
It's less clutter, you know, adding extra hoses and that as well.
So you can run a dry deck on the street.
We have done that as well.
Most of them stick with a wet deck.
Would you recommend something like this for like a full street car?
Yeah, yeah, of course.
They've got a thicker deck.
You can throw a lot more horsepower at them.
We've found that the cast motors are good for around,
you can make up to around 1,500 plus horsepower.
But how long do they last is another story.
We went several ones with a cast motor on June,
but we found there's obviously differences in blocks.
Every block is a bit different.
So you might get a good block, you get a bad block.
And for us, they just become too much machine work
and everything involved to make the good blocks work.
You might as well spend the extra money and go to a billet block
and you've got that peace of mind.
You can throw whatever you want at this.
It's going to take it.
I haven't seen one of these before here.
No, this is actually the first of its kind.
We've been working with PRP.
They've worked pretty hard at sort of developing a billet sump
to incorporate the daily engineering pump as well.
Internal scavengers, billet diff, which is all removable.
This is a first of its type, which we're planning to run on June
and really test it.
That is, honestly, that's really well, because yeah,
it's all obviously, it's all built in.
Yes, everything's incorporated.
Yeah, everything's incorporated.
Then like I said, you've got your internal scavengers inside here.
You've got your windage plates.
So they all sort of clip in here.
It's a pretty trick bit of gear.
So this one, once the diff's built, will go on June's motor straight away,
which is patiently waiting for it.
I mean, this is going to be a pretty big deal for taking this platform
to the next level.
Yes, a hundred percent.
A hundred percent.
Yeah, the diff is a big thing for us, man.
As soon as you put a bit too much drive, you can break the front diff.
And as soon as you break a front diff,
then you pretty much destroy your dry sump as well.
It's one less thing to have to worry about.
If you break that, or you break that, and at least you keep your pan.
And then you've got all your internal scavengers.
So that's a plus.
It's less hoses and fittings.
So it'll keep it all nice and neat.
And this is something that could technically also be running
like the street setups?
Yes, a hundred percent.
We're very close to probably running one on,
or we are going to run one on June,
and there's probably another one going on another pretty big street car
as well.
So we'll put it through its paces and make sure they do what they need to do.
So I think this is exclusive here, TRC exclusive, right?
Yeah, pretty much.
No one has seen this yet.
You're the first to see it.
I came up and you guys surprised us.
Yeah, you're the first to see this one.
That's awesome.
Should be pretty good.
Can you give us timeline?
We want to have this in the car back in June within the next couple weeks.
Wow.
So that's the plan.
So it's happening.
Yeah, it's happening.
It's right around the corner.
It's well and truly happening.
So there's a few little things which we've got to modify
to suit the bill of block,
which we're in the process of getting it done with Herman.
But yeah, once that's done, it'll be finished, ready to go.
Can't wait to see it.
We'll have to follow up with you guys by GTR Festival time.
100%.
Awesome.
And you'll probably find there'll be a number of cars running a buy-in as well.
That's awesome.
It's not only RVs in here, but I see a little bit of everything.
I see 2Js, a 1J.
Yeah, there's a 1J.
K-Series over there.
That's a K-Series, two SR20s, EJ.
This motor's for a customer in Miami.
We're just trying to sort a custom sump pan out for him.
3.2, 1J, 2.8, 2.8, another 3.2 there,
then an EJ, K20, and two SR20s.
And there's a Billet VR, which is in the process at the moment,
just getting some more things done at the machine shop.
And that's all happening there.
So they have a heads for it over there.
And that's actually for a GTIR, that motor there.
So yeah, it's a lot happening in here.
This is our dyno room.
As you can see, it's got a big, heavy door that you slide open.
It's a very thick, thick room.
Got both our dynos in here.
You get a bunch of airflow that comes from the back there?
Yeah, so we've got fresh air that comes in from above.
So it sucks fresh air in and then blows all the exhaust fumes from there
and sucks it out to a separate vent.
So you've got the hub dyno and then you've got a chassis dyno?
Yeah, we've got a four-wheel drive chassis dyno here.
And we've got our hub dyno for the bigger horsepower rear wheel drive
or four-wheel drive that we're going to flip over to rear wheel drive
to get the better tunes into them.
So yeah, it's nice soundproof.
We've had other dyno rooms before where it's just trying to get the control,
the noise.
Our main objective here was to sort of make it more comfortable for the workers
so they can tune all day and not have to wear earmuffs or earplugs
to sort of hear each other.
So you've got some HKS bits here?
This has a full HKS engine in a crate motor.
This is like the two-step deal?
Yeah, it's even got the HKS trigger kits, coils, everything.
Literally the whole catalogue.
Yeah, I haven't seen much of the Japanese stuff, right?
HKS stuff.
A lot of it's been like RB30 or motor strokers and all that.
So it's interesting how those have really flooded the market
and how much you guys have developed those.
Yes, correct.
But yeah, it's cool to see the JDM stuff here and there.
There is.
And I think it's coming back a little bit.
A lot of people are starting to restore the cars,
trying to keep them as original or old-school Japanese.
With HKS or mainly HKS Nismo stuff.
That's what people are starting to do, which we're noticing now.
They're restoring from top to bottom with all Nismo parts or HKS parts.
It's pretty cool.
Thank you so much.
No problem.
I really appreciate it.
You're more than welcome.
It's been an absolute blast.
It's been a pleasure having you here.
Hopefully we'll see you guys real soon.
Hopefully.
Thank you.