Cách sửa chữa điều khiển tivi Smart sam sung 2018, repairing samsung television control 2018

Hello everyone, welcome to the channel of Mr. Tam and Mr. Hoang from Thai Binh Today I will guide you to check and repair a remote control In this video, I want to guide you from users to newbies To check and repair a smart remote control of Samsung In fact, on the market, they sell quality remote control The price is only about 50,000 VND And the remote control of Samsung The price of Samsung is about 200,000 VND To buy a new remote control is not cheap for consumers And the remote control of Samsung is very poor in quality So how to use the remote control to make it smooth The best way to use the remote control is to buy a plastic bag And put the remote control in the right place So that the children do not accidentally pour water into the remote control Press the button on the remote control This is the way to turn on the remote control To open, remove all batteries And take a screwdriver At this time, I will find a copper wire that I will re-connect For a technician, the skill level can handle up to 40% of the job If you are not skillful, you will not be able to do the job It will lead to the phenomenon that the coil will be skewed Therefore, many customers bring equipment to repair I am very impressed with the old man who does this job In this case, it is possible that the old man has just started working I will re-connect the wire I will check the current I will check the current from the circuit Before testing, I will check the battery Sometimes it is due to running out of battery If the battery runs out, the coil will not be able to run There is no battery left How can I run with this battery? I will use another battery When the battery is left, I will measure the current The current is about 1.5v This is the battery, I will measure it to 1.5v This is the phenomenon that customers bring equipment to repair The old man has just replaced the pin I will clean it The control of the coil is very good The old man has just replaced the pin I will clean it The old man has just replaced the pin I will clean it The old man has just replaced the pin I will clean it The old man has just replaced the pin I will turn on my camera The problem is that the battery is not enough to fix the problem