OMICRON CPC 100 - Bedienung und Protokollierung

OMICRONenergy
9 followers
26 Video Views·Oct 22, 2023
Der Anwender kann das CPC 100 manuell bedienen oder die eingebauten spezifischen Prüf- und Meßfunktionen nutzen. Das Gerät kann entweder per Frontplatte oder von einem Laptop aus bedient werden. Für jede Meßaufgabe steht am CPC mit dem Quick Modus, den Prüfkarten und der PTM-Software passend zur bevorzugten Arbeitsweise des Benutzers das passende Werkzeug bereit.
Weitere Informationen über CPC 100: https://www.omicronenergy.com/de/produkte/cpc-100/
Interessiert an den Prüfungen mit CPC 100? – Sehen Sie sich alle Videos zu diesem Thema an: https://youtube.com/playlist?list=PLzmbZeI1bhu-IIdcJ8s3BlpyV2PCrcyng
The user can operate the CPC manually or use the built-in specific check and measure functions
and operate the device either from the front panel or from a laptop.
In many primary tests, it is enough to feed in the appropriate test signal.
The Quick mode is ideal for such test projects.
With Quick, all outputs of the CPC can be controlled
and simple and fast measurement functions, such as for current and voltage converter measurements, are also available.
The user selects the output, enters the desired test size and starts the feed-in with the green button.
The test size can be changed at any time using the keyboard or rotary button, even during the feed-in.
Measurements can also be carried out.
Two sizes can be measured at the same time, e.g. the primary and secondary currents of a current converter,
and are displayed in amplitude and phase.
Based on these two values, the CPC can calculate a third value,
such as the translation of the current converter or its polarity.
If voltage and current are measured, the CPC can calculate impedance values,
e.g. when measuring all currents.
From the measured results, protocols with ISO 9000-relevant information,
such as date and time or file name, can be created in several languages.
One click is enough.
Without much preparation and training effort,
Quick enables efficient execution of typical measurement tasks.
In addition to manual operation in Quick mode,
for frequently required measurement tasks,
own test maps with predefined measurement sequences are available.
The device is available for testing of current converters
using test maps for translation and phase measurement,
for recording of magnetization curves and kneepoints,
and for measuring curvature.
For voltage converters, test maps make it easier to measure translation, phase angle and curvature.
A test map is also available for measuring the contact resistance of switches.
For power transformers, test maps support measuring translation,
wind resistance and step-switching,
as well as the loss factor and capacity of the insulating system.
Individual test maps can be combined into a complete test plan,
e.g. for a transformer diagnosis.
Such test plans can also be prepared on a PC or laptop without a CPC in the office.
On site, the test plan leads the user through the test step by step.
By deleting the results of an earlier test,
the same test can be carried out again.
As a result, the results of regularly carried out tests can be compared perfectly.
The test results form the basis for comprehensive test protocols.
On the basis of these test maps, Omikron provides the user
with predefined test plans and MS-EXCEL protocol templates for testing energy-technical devices
such as power and voltage converters or power transformers.
Test protocols can be generated automatically
and then converted into customer-specific documents.
Further elements such as company logos can be easily installed in these.
In addition to the possibility of operating the CPC directly via the front panel,
the device can be operated with the Primary Test Manager software PTM from a PC or laptop.
PTM supports the user in its entire work process,
from the installation of the system parts and their parameters,
through the preparation of the test, the test itself,
to the analysis and administration of tests.
After entering general data such as location, production date, manufacturer,
serial number and name values, such as the number of windings and the switching group,
PTM automatically creates a test plan from this data,
which can simply be customized for the customer.
The test plan offers predefined measurements,
clear connection diagrams and helps to avoid wiring errors and save time.
Test and environment conditions can be documented.
The settings in the test plan ensure
that the maximum values of the tested object are not exceeded
and thus are not damaged during the test.
PTM shows the initial sizes as well as the progress of the test.
Test protocols that contain all measured data
can be easily adapted to customer-specific requirements.
Threshold values and tolerance bands can be used
to automatically evaluate test results.
With the PTM search function, data of comparable test subjects
or similar measurements can be easily recorded
and similar or trend analyses can be drawn up.
By importing in PTM, data from measurements
with devices of other manufacturers can also be compared.
For each measurement task, the CPC with the Quick Mode,
the test cards and the PTM software
is ready with the appropriate tool for the user's preferred workflow.
