Description: UCI Chem 1C is the third and final quarter of General Chemistry series and covers the following topics: equilibria, aqueous acid-base equilibria, solubility equilibria, oxidation reduction reactions, electrochemistry; kinetics; special topics.
General Chemistry (Chem 1C) is part of OpenChem: http://ocw.uci.edu/collections/open_chemistry.html This video is part of a 26-lecture undergraduate-level course titled "General Chemistry" taught at UC Irvine by Ramesh D. Arasasingham, Ph.D.
Recorded May 10, 2013.
Index of Topics: 0:00:00 Balancing Redox Reaction Review 0:14:46 Balancing Redox Reaction in Acidic or Basic Solution 0:19:07 Balancing Redox in Acidic Aqueous Solution 0:23:46 Rules for Balancing in Acidic/Basic Aqueous Solution 0:34:18 Example in Basic Aqueous Solution 0:47:56 Example in Acidic Solution
Okay. Let's go ahead and start.
Does anybody have any questions before I begin?
All right. So if you guys remember, at the end of class last time,
we looked at balancing oxidation-reduction reactions.
And I said that if you take a reaction like the combustion of methane
so the first example we took last time, we looked at methane
reacting with oxygen
to give you carbon dioxide
and water.
And in this
redox reaction,
you can use the usual method of balancing equations where you can look
at the number of atoms on the left-hand side and make sure
that the number of atoms are conserved.
Okay? So if you wanted to balance this equation,
we know that
there's one carbon, one carbon. If I want to balance the hydrogens, I need two
waters on this side, and therefore I need 2 O2. So just by looking at
the number of atoms of each type on the left-hand side,
you balance it out on the right-hand side as well. So this is one of those
examples where it's pretty straightforward
and you can just balance it the way you usually balance equations.
Once you balance the equation, I'm not going to go through the process, but you guys
remember
that we said this is being oxidized
and we said this is being reduced
and if this is being oxidized, then this has to be the reducing agent
and if that is being reduced,
oxygen has to be
the oxidizing agent.
And
our analysis of the oxidation numbers told us
that 8 electrons are transferred.
So in this reaction,
the substance being oxidized
loses 8 electrons
and the substance being reduced
takes up 8 electrons
in the form in which this balanced equation is written. Okay?
But I said also there are some examples. Some
equations are very, very difficult to balance, and the only way that you can
balance them
is by looking at the oxidation numbers.
And I had a lot of questions from students after class
on this, so I'm going to go ahead and work that last example that we worked in
class, because we were kind of rushed
and some of you
wanted me to redo that example and show you how to figure out
how to balance the equation.
So if we write down the reactants, we have sodium chloride
plus H2SO4
plus
MnO2
giving me Na2SO4
MnCl2
H2O
and Cl2. Okay?
So this is an unbalanced equation
and now you've got to
balance it.
And now this is one of those examples where if you were to use the usual
method, it would be virtually impossible to balance this equation.
Okay? So you have to use oxidation numbers.
So if you're given an equation of this type,
then of course
you have to assign oxidation numbers. So very quickly, remember we always assign
oxidation number per one atom. You can always compare one atom with one atom.
You can't compare the oxidation number of two atoms with one atom. Do you understand that?
So that's why
within parentheses we're going to put the oxidation number that corresponds to one
individual atom, and that's what we're going to
compare, even though you may have more than one
and the coefficient in front
represents the number of atoms that are there. Okay?
So if you look at sodium, you just have 1,
it's group 1, you know that the oxidation number is plus 1.
You know that chloride
has an oxidation of
negative 1.
Now if you go to sulfuric acid, we have two hydrogens, and each hydrogen will be
plus 1. Since
each of the oxygens on sulfur
is negative 2, and there are four of those, you can
figure out that
Remember, the sum of the oxidation numbers
gives you
the overall charge on the molecule
hydrogen and oxygen are fixed, so you can figure out what the oxidation number for sulfur is. So you know that
this is plus 6, there are four of these, and that would be negative 2. All right?
So that the sum of all of this gives you 0,
and the one that you don't know in this molecule is sulfur, and by using hydrogen
and oxygen, you can figure out the oxidation number for sulfur. Okay?
Now over here
each oxygen is negative 2, so on the oxygen side you have negative
4
therefore the manganese has to be what?
Positive 4, and we have only 1.
Now we turn to sodium. This is sodium again. We have two sodiums, plus 1.
Sulfur, once again, if you do the analysis,
this has 2+, this has negative 8,
therefore this sulfur has to be plus 6.
There are four oxygens, each of which is negative 2.
Now over here, the manganese,
there are two chlorides, so we know this is plus 2
and we have two chlorides, which is negative 1.
In water, we have 2
plus 1s
and a negative 2,
and in chlorine,
we have two chlorines,
each of which
are 0, because it's an element in its natural state.
Does everybody understand that? So we've assigned oxidation numbers for all the
atoms
of all the substances
that are there as reactants and as products.
Now we want to figure out, are there any one of these that are undergoing any changes?
All right?
And it is clear to everybody that sort of manganese, you can see, starts at
plus 4, goes to plus 2. So that's one change we see.
All right? And the other change we see is chloride
goes to
0. All right?
So
those are the two
changes that we observe. Everything else remains unchanged. All right?
So which one of these is
the one where the oxidation number- well, let's start with manganese. So what happens to the
oxidation number of manganese?
It goes from plus 4
to plus 2.
If it goes from plus 4 to plus 2, does the oxidation number increase or decrease?
Decrease.
If the oxidation number decreases, is it an oxidation or a reduction?
So we know that the manganese is undergoing
a reduction
and if you take one
atom of manganese
by how much does it decrease? If you look at the oxidation number,
what is the relative change? 2.
So that means it's a reduction
and a reduction is are electrons picked up or lost?
Picked up. So it's electron gain.
So we know two electrons are gained
and so to show that electrons are gained, we're going to put a plus sign in front
and we're going to say two electrons
are being picked up. Got it?
So we know that when manganese undergoes that transformation, it's undergoing a
reduction
and that two electrons are being
picked up. Gained. Okay?
Now let's turn to chlorine.
If you look at the chlorine, it goes from negative 1 to 0.
Does the oxidation number increase or decrease?
Increases.
If the oxidation number increases, what would that be?
Oxidation.
Okay? So this would be
the oxidation.
Now if you take one atom of chlorine, it goes from negative 1 to 0. So what is
the relative change? 1.
So remember, it's oxidation, so electrons are lost.
So every chlorine atom,
when it undergoes this change, will lose
one electron. Got it?
So now when you balance equations, remember in oxidation-reduction
reactions, what is the cardinal rule that you cannot break, and that is
the number of electrons given off
have to be the number of electrons taken up.
So to make them equal,
I need twice as many
chlorine atoms
undergoing an oxidation. So in other words,
to make the two electrons that are picked up
equal
to this, I'm going to have to multiply this by 2.
Can everybody see that? So now two electrons are lost,
two electrons are taken up.
So that means I need two chlorine atoms here. Got it?
So I already do have two chlorine atoms. Remember,
this relative change is one chlorine atom going to one chlorine atom.
So I already have two chlorine atoms here,
and that means I need two chlorine atoms on this side, but can you see there's another
set of chlorine atoms here that don't undergo any change. So there are actually two types of
chlorine atoms there.
There are some chlorine atoms that are like spectator ions. They don't undergo any change.
And then there are other chlorine atoms
that actually are oxidized.
Now the reason that it's virtually impossible to balance these kinds of
equations is
because you don't know what is the ratio of the chlorine atoms
that don't undergo any change
and those atoms that do undergo a change. Do you see that?
And that's why for these kinds of problems,
you actually have to
look at oxidation numbers,
figure out the number of electrons involved,
and then balance them. So
if you look at this,
I've already
known
I've already
assigned that two electrons are lost. So I can't change the number of manganese atoms here.
Therefore, I cannot change the chlorine atoms. So I have two chlorines here,
and I have two chlorines
that come from the one that undergoes changes.
So if you total up the number of chlorine atoms, how many chlorine atoms do I have?
Two here and two here. That gives me
four.
So I'm going to say I have four chlorine atoms on this side. So what I've done is
I've balanced manganese
and I've balanced the chlorines. I've
balanced the species that undergo oxidation,
and I've balanced the species that undergo reduction.
Now I can go back
and now I have to adjust for everything else. Make sure everything else is balanced.
So the easiest way is to go back and forth. I have four chlorides, so now I know I have four
sodiums.
So if I have four sodiums, I go over here, and I say I need two sodiums on that side
so that it gives me a total of four sodiums.
Now since I've balanced the sodiums, I can turn to the sulfates.
There are two sulfates here.
Okay? Overall,
if you take the sulfate anions, you have two sulfate anions here.
So how many sulfate anions do I need on this side?
Two. So I'm going to put two there.
Now that I've balanced the sulfates,
I need to make sure that I have four hydrogens.
All right? So I go over here,
and I'll have four hydrogens.
So now I can quickly check whether my equation is balanced. All right? So
this equation is now balanced.
Okay?
Now I can go figure this out by saying how many sodiums do I have? Four sodiums,
four sodiums.
I have four chlorides
I have four chlorides on this side.
I have four hydrogens, I have four hydrogens.
I have two sulfurs
over here, two sulfurs.
Okay?
Now if I want to balance oxygen, you can see that I have eight oxygens
plus two gives me ten oxygens on this side.
So I have ten oxygen atoms on the reactant side,
and therefore, you can see I have eight
plus two, I have ten oxygens
on the product side.
So the only thing left is manganese.
I have one manganese here, I have one manganese here, and you can see on both sides
the number of atoms of each element
are now balanced. And so now this is a balanced equation.
Now once you've balanced this, we know
that the substance being oxidized is NaCl. All right?
Now you could also say, in NaCl,
it's the Cl- that's actually oxidized, but because it comes as one package, we're
going to say sodium chloride
is oxidized.
But we know
within sodium chloride, it's actually the chloride ions that are actually being
oxidized. Okay?
So if you're asked what is being oxidized, it's acceptable to say NaCl,
it is also acceptable to say Cl-. All right?
On the other hand,
what is being reduced?
This is the substance being reduced. All right?
And so if you're asked what substance is being reduced,
you can say MnO2, or
if you want to get the manganese, you should say Mn4+, because the manganese
cation charge is 4+. All right?
If you just say manganese, it will be
metallic manganese, and you don't have metallic manganese here. Do you understand that?
So you have to say, if you're going to say
it's the Mn4+, that would be correct.
All right? Because the oxidation state of that
cation, the charge on that cation, would be 4+. Okay?
Now, if this is oxidized, this would be the reducing agent. If this is reduced, that
would be the oxidizing agent.
And overall, we know two
electrons are
transferred.
Now, every example, you have to analyze it in this way.
Because one of the learning outcomes
for a redox reaction is
for you to be able to look at a reaction
and you should be able to tell whether it's an oxidation-reduction reaction
If it is an oxidation-reduction reaction, you need to know what is being oxidized,
what is being reduced,
what is the oxidizing agent, what is the reducing agent, and you need to know
how many electrons are being transferred. Okay?
Now, this is one way
of balancing redox reactions. Okay?
Now there's a special class
of reactions
where it's like a subset. So we've looked at different ways of balancing
oxidation-reduction reactions
one way is just to look at the coefficients. If you can do it by just looking at the atoms
on either side, that would be great. Like the
the methane example.
But many other examples are virtually impossible to balance
unless you look at the oxidation numbers. Okay?
Now, a subset of that
is where we're looking at balancing redox reactions
in
acidic
aqueous
solutions
or
basic
aqueous
solutions. Okay?
Now, it's important that you realize that this is a subset, and you don't mix up the
approach that we use to balance these equations with the approach that we've
taken before.
Because sometimes when students come to my office hours and I ask them to show me
how they figured it out,
they use a mishmash of both approaches. All right?
And if you use a mishmash of both approaches,
you're not getting anywhere. Okay?
The only time you use the approach that I'm showing you right now is if the
question
actually specifies and tells you
balance this in acidic aqueous solution
or basic aqueous solution.
Because if the solution is acidic,
all of you recognize, if the solution is acidic,
what we have is
H3O plus
and water
and sometimes it's easier for us to just consider it as H plus and H2O.
All of you recognize
that now that you understand acid-base chemistry, if the solution is acidic
it has H plus ions, but the reason we don't consider it as H plus ions is in water,
H plus does not exist as a
entity of its own. It'll immediately combine with water and give you H3O plus,
and we said even H3O plus is not the complete picture. In fact,
the H3O plus is hydrogen bonded to lots of molecules of water
and
it has an expanded structure
and so even writing H3O plus
is not an accurate description. Okay?
But regardless,
for these problems, it's convenient to just think of it as H plus. All right?
And if it is basic,
we know
the fact that it's basic means that it's got hydroxide and water in here. All right?
So let's say you're given a question
where you're asked to balance
so balance
the following reaction
in acidic aqueous solution. So balance
the following
reaction
in acidic
aqueous
solution
Okay? And let's say
the equation given to you
is Fe2 plus
aqueous
plus MnO4- aqueous
giving you
Fe3 plus aqueous
plus Mn2 plus aqueous.
So this is the unbalanced equation
and when you look at this unbalanced equation, you can see that
the elements are missing. So one way to tell
is in these, you'll see that if the unbalanced equation is missing, usually
it misses oxygen and hydrogen. All right?
So if you look at this, can you see that on the left-hand side you have oxygen in MnO4-
on the product side, do you see any oxygen? No.
So that means if you're going to balance them, it means that that equation is incomplete. All right?
And the reason it's incomplete is what's missing is water
and if it's acidic solutions, it's water, and H plus is missing from that
and if it's basic solutions, what's missing from that equation is OH- and water.
So you have to bring those in when you balance the equation.
That's why this is a special subset. All right?
And you have to keep it separate
and you have to look at what you're being asked to do.
If you're asked to just balance the equation, you can't use this method.
If only it specifies saying balance this equation in acidic aqueous solution
or basic aqueous solution, that's the only time you can use this approach
and you will use this approach where hydrogen and oxygen
are missing either on both sides or on one side.
Okay? So whenever you deal with this,
what you have to keep in mind is I'm going to show you a sort of a shortcut
and it's convenient to remember this. All right?
So I'm going to give you a little table
and on one side, I'm going to say need
on the other side, I'm going to say add.
All right? So when you're balancing these equations,
you look for what's missing.
If one oxygen atom is missing,
then this is what you need to do. So let's start with, let's say you need hydrogen
and let's say you're in acidic aqueous solution.
So if you're in an acidic aqueous solution, and if you need hydrogen to balance the equation, that means
hydrogen is missing from this balanced equation, you have to bring in a hydrogen
then on the other side, you put in an H+. All right?
Now, it's much easier to do this than if you wanted to be more accurate
then you would put H3O plus on one side
and H2O on the other. So can you see that
if you need an extra hydrogen,
whether you need it on the product side or you need it on the reactant side, you put H3O plus
and if you put H2O on the other side,
what is the difference between the two?
The net is that H3O plus has one extra H+. Do you see that?
But, that's if you want to be really accurate. It's acceptable to write this. For these, you know,
you can write them as H+, keeping in mind that you know that it is really H3O plus.
And even that is not an accurate picture. Okay?
Now if you need oxygen,
what you do is
on the side that you need oxygen,
you put H2O
and on the other side of the equation
you will put
2H+.
All right? So if you compare these two, can you see you have two hydrogens on this side,
you have two hydrogens on that side,
so the two hydrogens will cancel each other, so the net result is that you have an extra oxygen. All right?
I put this sort of arrow with two heads
because depending on whether you want it on the product side, on the reactant side, you can reverse that
any way you want
depending on where you want that extra oxygen. If you want it on the product side,
you'll reverse that.
If you want to be strictly accurate,
then
you would write this as
3H2O on one side
and on the other side
you put 2H3O+.
The net result is
that you have an extra oxygen on that side. I'm underlining that extra oxygen because
see, there are three oxygens here, there are only two oxygens on that side.
But it's easier to just stick to that.
So that is if you're in
acidic aqueous solution.
Now, if you're in basic
aqueous solution,
then if you need a hydrogen,
then what you do is on the side that you want that extra hydrogen, you put water.
On the other side, you put OH-.
So can you see on this side, there's one oxygen, there's one oxygen on this side.
But over here there are two hydrogens, over here there's only one hydrogen. So the net
result is that you have an extra hydrogen on this side.
If you want two oxygens, I'm sorry, if you want an oxygen,
then what you put is 2OH-
and on the other side
you put H2O. So
can everybody see you have two oxygens on this side,
you have one oxygen, so the net result is that you have an extra oxygen. All right?
So just keep this table handy, and you do a couple of examples,
and depending on whether you're in an acidic solution or a basic solution now,
you can solve this
by bringing this in. So I'm going to take an example.
So if you take this example, you start first
to balance
you start first
by writing
2
half
reactions. So you have to split the equation that's given to you
into two half reactions. So remember,
if you want to write a half reaction, you know iron goes to iron 3+, so 2
plus goes to this,
this would be the other half reaction. All right?
So if I'm writing two half reactions, I would say
Fe2+,
goes to Fe3+,
and MnO4-
goes to Mn2+.
Got it? So the first step is for only these kinds of
problems,
you first split them into two half reactions. All right?
Second,
now you balance
all of
the atoms
All right?
using
H2O,
H+,
or OH-
as needed.
Okay? So
if it's basic solution, you use OH- in water. If it's acidic solution, you use
H+, in water. So now I'm going to go back to the same equation
and I'm just going to balance
all of the atoms. So here
I have iron
I have iron, so my atoms are balanced. I don't need to bring water into this, because
there's no oxygen or hydrogen in that equation.
However, in the second one
I have 1 manganese, I have 1 manganese
but you can see I have 4 oxygens. All right?
So that means if I want to balance this, I need to bring in 4 oxygens.
Okay?
So if I turn to my table
remember, in this table
if I'm in the acidic solution, so remember this is an acidic solution, the
question says balance this in acidic aqueous solution.
In acidic aqueous solution, if I need oxygen, I need to bring water, and on
the other side put 2H+.
How many oxygens do I need up there?
I have 4 oxygens on this side. So I need 4 oxygens on this side.
So how many waters do I need to bring in on this side?
4. So I'm going to put 4H2O, and on the other side, for every molecule of water, I need to add 2H+.
So how many H pluses would I put here?
8H+. You see that?
So by bringing in
H2O
and H+,
now I'm able to balance
the oxygens.
Okay? So let's quickly check.
1 iron, 1 iron.
I have 8 hydrogens, 4 times 2, 8 hydrogens.
I have 1 manganese,
1 manganese.
I have 4 oxygens,
I have 4 oxygens, so I balanced all the atoms.
Okay?
Now the third step
is now
remember we said whenever you balance equations, there are two things that you
need to look for. What are those?
You have to have atom balance, and what is the next thing that I kept reminding you
this quarter? What is the other thing that you need to remember?
Charge.
You have to also have charge balance, because you can't create or destroy charge.
So whatever charge you have on the left-hand side
has to equal the charge on the right-hand side.
So now
we have to
balance
the charges
in both
half reactions
using
electrons.
All right? So let's go, so
remember these are half reactions. So in half reactions, you have to show the electrons
being lost
and the electrons being gained. All right?
So if I wanted to take the first half reaction,
and you wanted to balance charge,
because these are redox reactions,
we bring in electrons to balance charge.
Okay? So let's look at this.
This is going from iron 2+, to iron 3+.
Now I need to balance charge by bringing electrons in.
So if I put one electron on this side, what is the overall charge here?
Plus 2, this is 3+,
and there's a minus 1,
can you see that the overall charge on that side would be plus 2 as well?
All right?
Now remember, all I have is electrons. If I put electrons on this side, if I put
one electron on this side, what would the overall charge come out to be? Plus 1.
All right? So I'll have plus 1 on this side and plus 3 on that side, that's not
going to help me.
The only way that I can balance charge here is to put an electron on this side,
all right? And I would have balanced charge.
Now let's go to the other one. The other half reaction was H+,
plus MnO4-
gives me Mn2+, plus 4H2O.
All right? So now let's look at charges. On this side,
I have 8+, and minus 1. So what is the overall charge here?
Plus 7. Can everybody see that? I have 8+, coming from the 8 hydrogens,
and I have a minus 1, so I have plus 7.
On this side, I have plus 2.
All right? So all I have available to me are electrons, and I need to make them
the charges balance. Okay? So can you see that
if I put more electrons on this side, this will go down even more. It'll go to
plus 1. If I put an electron on this side, it'll be plus 1, that's not going to help me.
How many electrons do I need to put on this side so that these two balance each other?
5. So you can see I have 5 electrons.
All right? So another way is, if you're losing electrons on this side,
then the electrons have to go on this side, because you know the electrons have to be
picked up. So can everybody see that this is the oxidation half reaction,
and this is the reduction half reaction.
All right? Now,
the fourth step is the cardinal rule. Remember, for redox chemistry, what is the
cardinal rule?
The number of electrons given off have to equal the number of electrons taken up.
In the first reaction, one electron is taken up.
In the second one, 5 electrons are given off.
So the net outcome is that you have to have 5 electrons lost
and 5 electrons gained. So how do I get 5 electrons on this side?
I multiply everything by the coefficient 5.
All right? So now, add
the two reactions,
okay?
Keeping in mind
that
the electrons, that the number
of electrons
lost
must equal
number
of electrons
gained.
All right? So that means I know
that I have to multiply this by 5
all right? In order to balance it.
So what I will have is 5
Fe2+,
giving me 5
Fe3+,
plus 5 electrons. I'm just going to multiply everything in the top equation by
the coefficient 5,
and then at the bottom, I will have 5 electrons
plus 8 H+,
plus MnO4-
giving me Mn2+,
plus 4
H2O.
So now I can add these two equations together.
And when I add these two equations together,
you can see
that
the number of electrons lost and the number of electrons gained will cancel each other
out.
So what I end up with
is 5
Fe2+. I'm going to put all the reactants on the reactant side,
plus 8 H+,
plus MnO4-
will give me 5
Fe3+,
plus Mn2+,
plus 4
H2O.
So now look at this equation and see, can I reduce this further? Sometimes you can
reduce everything
to the lowest
whole number. All right?
Can I reduce the coefficients to any other lower number? No. All right?
So now the last step is for me to quickly check whether this equation is balanced.
Okay?
So once again, we start with I have 5 ions,
5 ions.
I have 8 hydrogens,
4 times 2, 8 hydrogens.
1 manganese,
1 manganese.
I have 4 oxygens on this side,
I have 4 oxygens on that side,
I have atom balance.
Okay?
Next step is do I have charge balance? That's a quick way to check whether the equation is
balanced.
So I have 5 times 2 gives me 10+,
I have 8 plus here, that gives me 18+,
and then minus 1. So what is the total charge on this side?
It would be plus 17. All right?
Now let's look at
if my equation is balanced, I should have the same charge on this side as well.
5 times 3 gives me 15+,
plus 2 gives me
17+.
All right? I know
that my equation is balanced. The charge is on either side. So now this equation is balanced.
Okay?
And I know from this
that
the species being oxidized
is iron
the species being reduced is MnO4-
because remember that this comes from the reduction half reaction, this comes
from
the oxidation half reaction
if this is oxidized, this would be the reducing agent
if this is reduced, this would be the oxidizing agent
and overall
I know
5 electrons are
transferred.
So in this reaction, even though
when you look at the balanced equation
you can't tell how many electrons are being transferred, because the balanced equation
does not reveal that to you
by going through this analysis, now you know
that in this reaction
5 electrons are being transferred from
the iron
to the manganese. The MnO4-. All right?
Now let's take another example, but this time
we're going to look at an example where we have
basic solution. Now
for the first example, I went stepwise. Now I can do it all in one step. All right?
Because, you know, to save time
you can just do all of these steps, you know, in just a single
step. Okay? So let's take the second example
and let's say you're asked to balance
zinc
plus HeO
going to
this, 2-. So ZnO2 2-
plus
mercury
and let's say we are in basic
aqueous
solution
Now, is it clear to everybody
that if you're using this approach, it has to be specified that you're in aqueous
solution. You can't just use this
willy-nilly just because they've given you two reactants and two products. All right?
You can only use it for these kinds of problems
where
you can see that oxygens are missing, or hydrogens are missing, or you're told that
it's in basic aqueous solution. So
remember the first step for this is to split them into two half-reactions. So we
know if you have zinc on this side
in this half-reaction
you have to have the zincs on both sides
the other half-reaction would be 8-GeO
going to 8-G. All right?
So the first step is to split them into two half-reactions, and that's pretty
straightforward. You split them into two half-reactions
Now I do the second step is what? Atom balance. So now I have to bring in
water
NH+, or water, and hydroxide.
So now we're in basic solution, so if we need hydrogen, you use this. If you need
oxygen, you bring in 2OH- and H2O. Okay? So let's look at this
I have one zinc, one zinc
on this side I have two oxygens
therefore I need to bring in two oxygens on this side
and remember, if you're in basic solution, you want one oxygen
you have 2OH-
So I need two oxygens. So how many OH- do I need? 4OH-
and on the other side of the reaction I need to put 2H2O.
So I'm going to put 4OH- on this side
and I'm going to put 2H2O on that side
the net result is that I've added 4 extra oxygen on this side to balance the
equation
Now let's quickly check
one zinc, one zinc
I have 2 oxygens plus 2 oxygens, I have 4 oxygens on this side, I have 4
oxygens on this side
I have 2 times 2, 4 hydrogens
I have 4 hydrogens. All right?
So what I've done is atom balance, bringing in hydroxide because in basic
solution
Now once you do atom balance, what do I need to do? Charge balance. All right? So I'm going to do all of it all at once.
So if I'm going to do a charge balance here, I have 4- on this side,
I have 2- on this side. All right?
So how would I balance this?
See, I have only electrons. If I put more electrons on this side, this 4-
will become 5-. That's not going to help me.
So, but if I bring in 2 electrons here
can everybody see now I have 4- on this side, this 2- and this 2-
will give me 4-
Now look at this half reaction. Are electrons being lost or are electrons being gained?
Lost. Okay? Because it's producing electrons. Electrons are on the product side.
It's producing electrons
and therefore if the electron's on the product side,
electrons are lost.
And therefore this would be
the oxidation. All right?
Now, on the other side, let's go to this. I have 1 mercury, 1 mercury, I have 1
oxygen on this side, so I have to bring 1 extra oxygen on this side. I'm in basic
solution, so I'm going to put 2 OH- there
and H2 on this side. All right?
So now let's quickly check. 1 mercury, 1 mercury. 2 oxygens, 2 oxygens.
2 hydrogens, 2 hydrogens. So now I've balanced this.
Okay?
Now I need to do a charge balance.
The charge balance would be if there are electrons being produced here, you know
electrons need to be picked up on this side, so
you know, the next step is going to be straightforward.
Let's look at this.
I have 2- on this side,
I have neutral, neutral.
So how many electrons do I need to bring in? 2.
So
there we are.
Now,
the electrons are on the reactant side. That means electrons are being picked up, so
this is electron gain,
and this would be
the reduction. All right?
And so
now I make sure the number of electrons given off
equal the number of electrons taken up.
In this case, it's pretty
it's- life is much easier. You can see that 2 electrons are given off,
2 electrons are taken up, so I don't have to multiply any of these half reactions
and so now all I need to do is add them up.
So that
now the 2 electrons given off
and the 2 electrons taken up
cancel each other out, so if I add these two equations together,
what I end up with is 4OH-
plus zinc
plus water
plus HGO
will give me
ZnO2 2-
plus 2H2O
plus 8G
plus 2
OH-. So all I've done is added all the reactants on the reactant side
and added all the products on the product side.
Now if you look at this, there's some common things on both sides. You can see
there's water here
and there's 2 water there.
So if I take this water onto the product side, you can see it, or if I cancel off
one molecule of water on either side,
I can get rid of one molecule on this side and one molecule on that side, so I have
one water molecule there.
I have 4OH- on this side
and I have 2OH- on this side.
So if I take this,
I'll end up with, you can see
that this will become 2
and this will become 1. All right?
So all I've done is just cancel common things on either side
and my reaction now comes down to 2
OH-
plus zinc
plus HGO
will give me
this
plus water
plus HG. All right?
Now final test is what?
Finally you have to confirm whether you haven't made any catalyst mistakes along the way.
And the way to check is, if the equation is balanced, what does it have to meet?
There are two conditions it has to meet.
Atoms must balance and
charges must balance. So quickly
go through that.
So I have 2 oxygens on this side, I have 2 plus 1, 3 oxygens on this side
I have 2
plus 1, 3 oxygens
I have 2 hydrogens
I have 1 zinc, 1 zinc
1 mercury, 1 mercury
overall charge on this side is negative 2, overall charge on this side is negative 2
I know this equation
is balanced. All right?
Now
you guys need to practice this so that you don't make all these sort of stupid
mistakes that people make
when they haven't practiced enough. So I'm going to do one
really fast
All right? So we're going to take two more examples, and we're going to go through this fast
because that's the sort of speed at which I need you to be able to do this
okay? If you've had
adequate practice. Okay? So let's take
this. And I want to take two examples where
you might see a curveball
and I want to make sure that you're not thrown off. Okay?
So if I take silver
plus
Cn-
aqueous
plus O2 gas
giving me
Ag
Cn twice minus aqueous
and let's say you're told that this is in basic solution. All right?
So the first step is to split it into two half reactions. All right?
Now since one of the products is this,
and this has silver and cyanide, can you see that one
half reaction has to be
this
All right? Because if you're going to balance it,
if you have both of these together, you need the silver and cyanide together in one
half reaction.
So what am I left with?
O2.
And so
I'm just going to leave that blank. All right?
Because when we balance it,
we'll figure out what should come on that side. Okay? So don't get thrown off. Like the
first two examples we saw, it was very easy to split it up into two half reactions
because you had
one reactant and one product that kind of matched up, and another reactant and another product
that matched up. Here you don't have them matching up.
But that's okay. Right?
Now, we're in basic solutions, so let's start doing
atom balance. One silver, one silver.
How many cyanides on this side? Two.
So I have two cyanides.
So my atoms are balanced. I don't have to bring in hydroxide, I don't have to bring in
water, because that reactant doesn't have oxygen or hydrogen in it. Okay?
The next step is charge balance.
I have two minus on this side,
I have minus one on this side.
So how many electrons do I need to bring in?
One electron.
The electrons are lost, so this has to be the
oxidation.
Okay?
Now let's go to this one.
We have oxygen.
Remember, we're in basic solution. If you want to balance oxygen, what do you bring in basic
solution?
Hydroxide.
You have to bring in- there are two of this.
If you need two oxygens, we have to bring in 4OH-
and on the other side, 2H2O.
Just remember this table. If you need oxygen,
2OH-, water on the other side. Okay?
Now,
let's quickly check. I have four oxygens, four oxygens,
I have four hydrogens, four hydrogens, so I have atom balance.
Now I need to do a charge balance, and I know the electrons have to go on this side, because
this is the oxidation, this has to be the reduction.
So I have four minus on this side, so how many electrons do I need to put in
over here?
Four electrons. Because everything else is neutral.
Okay?
So now when I add, and we know that this is the gain, so therefore this is the
reduction. All right?
Now
I have one electron on this side, four electrons on this side, so what do I
need to do?
Multiply that by 4, so that the number of electrons given off equal the number
of electrons taken up.
Okay? So four electrons are given off,
four electrons are taken up.
Now I need to add both of these.
So I have 4
silver
plus 8
Cn-
plus 2H2O
plus O2
giving me
4
Ag
Cn
twice
minus
plus
4
OH-
Now, I hope you're checking along with me to make sure that I'm transferring
everything correctly. So I have 4 Ag,
8 Cn-
and 4 of that,
and then over here I have 2H2O, 2 4H-
Now look at this and see, can I cancel off any hydroxides? Are there common
hydroxides on this side? Are there common hydroxides on, you know, or water? No.
There's hydroxide, there's water, but there's no more hydroxides on this side.
Now see whether you can reduce the coefficients any further.
There's a 1 here, so I can't.
All right? Even though this is 4A2, there's only one oxygen,
so I can't reduce this
reaction any further.
So that means that
this is all I can do. Now I need to make sure that it is actually balanced. So I
have 8 silver
I mean, it's 4 silver, 4 silver.
8 cyanides, 4 times 2,
8 cyanides. Okay?
I have
2 times 2, 4 hydrogens
I have 4 hydrogens.
I have 2 oxygen plus 2 of this, 4 oxygens,
I have 4 oxygens.
Now I need to do a charge balance. All right? So overall I have
minus 8 on this side. Neutral, neutral, neutral, 8 minus.
I have 4
times this gives me 4 minus, plus 4 minus,
I have negative 8 on this side,
so I know the equation is balanced.
The last step is now,
having looked at this,
you know what's being oxidized here
is silver.
You can see what's being oxidized
is silver.
What's being reduced is oxygen.
All right?
And if this is being oxidized,
this would be the reducing agent
this would be the oxidizing
agent
and how many electrons are transferred in this reaction?
4 electrons are transferred. In the end,
you have to tie it up
and you should be able to rationalize in a redox reaction, you need to be able to figure out
how many electrons
are being transferred. Okay?
Now one last example
again,
something that you may
I don't want you to get thrown off if you see some of these types of questions. And the
next one is, quickly we can go through, let's say we have Br2
going to BrO3-
plus
Br-
and let's say this is an acidic
solution. All right?
So now let's look at this. You have only one reactant.
All right? It gives you both BrO3- and Br-. All right?
So that means
that
to balance this, I'm going to need that
and to balance the second part, I'm going to need bromine as well.
So what this means, and remember this is unbalanced. It doesn't mean that you just have
one molecule of Br2. You have lots of
molecules of Br2.
So some of them
are going to be oxidized, and some of them are going to be reduced. So this is
unique, where the same reactant,
part of it is oxidized, and part of it is reduced. Okay?
And so
don't get thrown off. If you just have one reactant, and this has bromine in it, and this has bromine, that means
you have to use both. Okay?
So now let's do an atom balance. 2 bromines, I need 2 bromines.
Now 2 times 3 gives me 6 oxygens.
If I need 6 oxygens, I need 6 oxygens on this side,
so I need 6H2O
and 12H+.
Got it? If you need oxygens in acidic solution, you put water and 2H+.
So I put 6 waters because I need 6 oxygens, 2 times 3, 6,
and I have
12H+. I'm sorry.
I need 12H+.
So quickly check. 2 bromines, 2 bromines.
2 times 3, 6 oxygens, 6 oxygens.
12 hydrogens, 6 times 2, 12 hydrogens. All right?
Now do a charge balance. On this side,
I have zero charge.
On this side, I have 2
minus
and I have
12H+. So overall, what is the charge on this side?
I have
plus 10.
So
how do I make this
the same?
All right?
So what would you do?
If I put
10 electrons on this side, I'd have 10 minus
and 10 plus.
That's not going to help me.
But can you see that if I put 10 electrons on this side,
since this is zero,
10 plus and 10 minus will give me zero charge on either side.
All right? So you've got to figure out where you're going to put the electrons, and you can see that
putting electrons on this side is not going to help you balance charge. So you've got to bring it on this side.
Okay? So this would be
the oxidation.
Now let's look at this. I have Br2, gives me 2Br-. So atom balance.
Now I need charge balance. All right?
If I need charge balance,
I have zero charge on this side, 2-, so can you see that I've got to bring
two electrons there?
This would be
the reduction.
Okay? Now if I'm going to add them up,
and I want to make sure the number of electrons given off equal the number of
electrons taken up, what do I have to do on this side?
Multiply by 5. All right?
Now I'm going to add them up. So I'm going to start with 6H2O
plus Br2
plus 5Br2
so I'm going to multiply this by 5. Now I go back to this,
gives me 2BrO3-
plus 12H+,
plus 5 times 2 will give me 10
Br-. Okay?
Now ask yourself
can I do anything to sort of
refine this equation? You can see I have 1 bromine here, 5 bromines there. All right?
So that means I can say 6H2O
plus 6Br2
will give me 2BrO3-
plus 12H+,
plus 10
Br-.
Now see whether you can cancel out anything common on both sides. Can you?
There's nothing to cancel out.
But can I reduce this equation further?
Can everybody see that I can actually divide the whole thing by 2?
So if I divide everything by 2, I end up with 3H2O
plus 3Br2
gives me BrO3-
plus 6
H+,
plus 5
Br-. All right?
And
then you can check for charge balance. Zero charge on this, this is negative 1,
this has 6+,
negative 5,
it's zero charge on this side.
Now the last thing I need you to know is Br2 is oxidized,
Br2
is reduced. All right?
If this is oxidized, this would be the reducing agent. If this is reduced, this is
the oxidizing agent.
How many electrons are being transferred?
Remember, there are 10 electrons transferred here,
but I divided everything by 2. So there are 5 electrons transferred.
So that means in this balanced equation, 5 electrons
are transferred.
You see that? When you divided the whole equation by 2
to the lowest coefficients,
you need to divide the number of electrons by that as well. So in this
reaction, 5 electrons are being transferred. Okay?